화학공학소재연구정보센터
Journal of Membrane Science, Vol.540, 10-18, 2017
Ultra-thin, multi-layered polyamide membranes: Synthesis and characterization
Customization of thickness and roughness of thin film composite reverse osmosis (TFC-RO) membranes provides opportunities to optimize the membrane permeability and fouling resistance. We propose a novel strategy to synthesize ultrathin multi-layered polyamide (ML-PA) membranes with the versatile maneuverability of the salt rejecting layer thickness and roughness. We have employed advanced quartz crystal microbalance with dissipation (QCMD) techniques to study the deposition rate of the ultrathin PA nanolayers with a resolution of approximately 8, 15 and 25 nm per deposition cycle. At brackish water desalination condition, the ML-PA membrane exhibited similar to 60% flux increase and higher salt rejection compared with the home-made TFC membrane fabricated by the conventional method. Benefit from the low roughness, the ML-PA membrane shows much better fouling resistance to Bovine serum albumin (BSA).