화학공학소재연구정보센터
Electrochimica Acta, Vol.241, 341-352, 2017
High-Temperature Electrochemical Corrosion of Ultra-High Strength Carbon Steel in H2S-Containing Alkaline Brines
High-temperature corrosion of ultra-high strength low-alloy carbon steel, grade UD-165, was investigated using in situ electrochemical techniques in H2S-containing alkaline brines (5 wt% NaCl; pH 8.1, 9.8, and 10.8) at 200 degrees C. After 60 hours of electrochemical testing, the corrosion rate (CR) at pH 9.8 was the highest, almost twice of the lowest CR found at pH 8.1. The highest CR correlated with the highest HS (aq) ratio to the total reactive anions. The CR was accelerated at 200 degrees C by at least one order of magnitude compared with that at 85 degrees C. A modified method was used to obtain Tafel slopes from linear sweep voltammetry (LSV) plots with the limiting current effect, and the anodic and cathodic reactions were discussed based on the solution speciation, the Tafel slopes, and the corrosion products. Scanning electron microscopy (SEM) showed two layers of corrosion products at pH 8.1 and 9.8. The sulfur distribution moved outwards from the inner layer as pH increased from 8.1 to 10.8. With the pH increase at 200 degrees C, the major corrosion products changed from pyrrhotite and siderite to magnetite, which was in accordance with the reactive species and the Pourbaix diagram. (C) 2017 Elsevier Ltd. All rights reserved.