화학공학소재연구정보센터
Applied Surface Science, Vol.419, 357-364, 2017
Room-temperature aqueous plasma electrolyzing Al2O3 nano-coating on carbon fiber
A novel room-temperature aqueous plasma electrolysis technique has been developed in order to prepared Al2O3 nano-coating on each fiber within a carbon fiber bundle. The microstructure and formation mechanism of the Al2O3 nano-coating were systematically investigated. The oxidation resistance and tensile strength of the Al2O3-coated carbon fiber was measured at elevated temperatures. It showed that the dense Al2O3 nano-coating was relatively uniformly deposited with 80-120 nm in thickness. The Al2O3 nano-coating effectively protected the carbon fiber, evidenced by the slower oxidation rate and significant increase of the burn-out temperature from 800 degrees C to 950 degrees C. Although the bare carbon fiber remained similar to 25 wt.% after oxidation at 700 degrees C for 20 min, a full destruction was observed, evidenced by the similar to 0 GPa of the tensile strength, compared to similar to 1.3 GPa of the Al2O3-coated carbon fiber due to the effective protection from the Al2O3 nano-coating. The formation mechanism of the Al2O3 nano-coating on carbon fiber was schematically established mainly based on the physic-chemical effect in the cathodic plasma arc zone. (C) 2017 Elsevier B.V. All rights reserved.