화학공학소재연구정보센터
Applied Surface Science, Vol.395, 98-104, 2017
Structural characterization of InAlAsSb/InGaAs/InP heterostructures for solar cells
In this work, we have characterized by transmission electron microscopy techniques the structural properties of InAlAsSb/InGaAs/InP heterostructures, with target applications in high efficiency solar cells. Previous photoluminescence (PL)(1) analysis suggested the existence of compositional fluctuations in the active layer of these heterostructures. 220 bright field (BF)(2) diffraction contrast micrographs have revealed strong strain contrast in the InGaAs buffer layer, related to the existence of these compositional fluctuations. The effect of a decomposed buffer on the growth of the InAlAsSb layer has been analyzed through the simulation of the strain fields in the heterostructure using the finite elements method (FEM)(3) These simulations have shown that the strain in the buffer layer due to the compositional fluctuations only affects the first few nm of the InAlAsSb layer. The analysis by aberration corrected high angle annular dark field scanning transmission electron microscopy (HAADF-STEM)(4) and electron energy loss spectroscopy (EELS)(5) of the composition of the InAlAsSb layer reveals that any compositional fluctuation is only observed as an average effect, rather than in the form of clustering or atomically sharp transitions. The limitations of these techniques for the detection of small 3D compositional fluctuations are discussed. (C) 2016 Elsevier B.V. All rights reserved.