화학공학소재연구정보센터
Journal of Power Sources, Vol.327, 265-272, 2016
Preparation and characterization of mono-sheet bipolar membranes by pre-irradiation grafting method for fuel cell applications
A new method for the preparation of the mono-sheet bipolar membrane applied to fuel cells was developed based on the pre-irradiation grafting technology. A series of bipolar membranes were successfully prepared by simultaneously grafting of styrene onto one side of the poly(ethylene-co-tetrafluoroethylene) base film and 1-vinylimidazole onto the opposite side, followed by the sulfonation and alkylation, respectively. The chemical structures and microstructures of the prepared membranes were investigated by ATR-FTIR and SEM-EDS. The TGA measurements demonstrated the prepared bipolar membranes have reasonable thermal stability. The ion exchange capacity, water uptake and ionic conductivity of the membranes were also characterized. The H-2/O-2 single fuel cells using these membranes were evaluated and revealed a maximum power density of 107 mW cm(-2) at 35 degrees C with unhumidified hydrogen and oxygen. The preliminary performances suggested the great prospect of these membranes in application of bipolar membrane fuel cells. (C) 2016 Elsevier B.V. All rights reserved.