화학공학소재연구정보센터
Journal of Power Sources, Vol.324, 272-281, 2016
Low-cost flexible supercapacitors based on laser reduced graphene oxide supported on polyethylene terephthalate substrate
A controlled high powered CO2 laser system is used to reduce and pattern graphene oxide (GO) film supported onto a flexible polyethylene terephthalate (PET) substrate. The laser reduced graphene oxide (rGO) film is characterized and evaluated electrochemically in the absence and presence of an overlying anodicaly deposited thin film of pseuodcapactive MnO2 as electrodes for supercapacitor applications using aqueous electrolyte. The laser treatment of the GO film leads to an overlapped structure of defective multi-layer rGO sheets with an electrical conductivity of 273 S m(-1). The rGO and MnO2/rGO electrodes exhibit specific capacitance in the range of 82-107 and 172-368 Fg(-1) at applied current range of 0.1-1.0 mA cm(-2) and retain 98 and 95% of their initial capacitances after 2000 cycles at a current density of 1.0 mA cm(-2), respectively. Also, the rGO is assigned as an electrode material for flexible conventionally stacked and interdigitated in-plane supercapacitor structures using gel electrolyte. Three electrode architectures of 2, 4, and 6 sub-electrodes are studied for the interdigital in-plane design. The device with interdigital 6 sub-electrodes architecture I-PS(6) delivers power density of 537.1 Wcm(-3) and an energy density of 0.45 mWh cm(-3). (C) 2016 Elsevier B.V. All rights reserved.