화학공학소재연구정보센터
Korean Journal of Materials Research, Vol.26, No.9, 498-503, September, 2016
Kinetics and Equilibrium Isotherm Studies for the Aqueous Lithium Recovery by Various Type Ion Exchange Resins
E-mail:
The characteristics of aqueous lithium recovery by ion exchange were studied using three commercial cation exchange resins: CMP28 (porous type strong acid exchange resin), SCR-B (gel type strong acid exchange resin) and WK60L (porous type weak acid exchange resin). CMP28 was the most effective material for aqueous lithium recovery; its performance was even enhanced by modifying the cation with K+. A comparison to Na+ and H+ form resins demonstrated that the performance enhancement is reciprocally related to the electronegativity of the cation form. Further kinetic and equilibrium isotherm studies with the K+ form CMP28 showed that aqueous lithium recovery by ion exchange was well fitted with the pseudo-second-order rate equation and the Langmuir isotherm. The maximum ion exchange capacity of aqueous lithium recovery was found to be 14.28 mg/g and the optimal pH was in the region of 4-10.
  1. Chon U, Han G, Kim K, Kim KH, J. Korean Inst. Res. Rec., 19, 3 (2010)
  2. Kitajou A, Suzuki T, Nishihama S, Yoshizuka K, Ars Separatoria Acta, 2, 97 (2003)
  3. Zhu S, He W, Zhou X, Zhang X, Huang J, Trans. Nonferrous Met. Soc. China, 22, 2274 (2012)
  4. Kim YS, In G, Choi JM, Bull. Korean Chem. Soc., 24, 1495 (2003)
  5. Wang F, Wang LJ, Li JS, Sun XY, Han WQ, Trans. Nonferrous Met. Soc. China, 19, 740 (2009)
  6. Navarrete-Guijosa A, Navarrete-Casas R, Valenzuela-Calahorro C, Lopez-Gonzalez JD, Garcia-Rodriguez A, J. Colloid Interface Sci., 264(1), 60 (2003)
  7. Rafati L, Mahvi AH, Asgari AR, Hosseini SS, Int. J. Environ. Sci. Technol., 7, 147 (2010)
  8. Bali S, Huggins FE, Ernst RD, Pugmire RJ, Huffman GP, Eyring EM, Ind. Eng. Chem. Res., 49(4), 1652 (2010)
  9. Alyuz B, Veli S, J. Hazard. Mater., 167(1-3), 482 (2009)
  10. Lee DH, Lee MG, J. Environ. Sci. Int., 11, 263 (2002)
  11. Boyd GE, Schubert J, Adamson AW, J. Am. Chem. Soc., 69, 2818 (1947)
  12. Mustafa S, Shah KH, Naeem A, Ahmad T, Waseem M, Desalination, 264(1-2), 108 (2010)
  13. Lee KM, Jo YM, J. Ind. Eng. Chem., 19, 533 (2008)
  14. Park JM, Kam SK, Lee MG, J. Environ. Sci. Int., 22, 1651 (2013)
  15. Lee MG, Kam SK, Suh KH, J. Environ. Sci. Int., 21, 623 (2012)
  16. Ho YS, McKay G, Process Biochem., 34(5), 451 (1999)
  17. Gode F, Pehlivan E, J. Hazard. Mater., 100(1-3), 231 (2003)
  18. Kam SK, You HN, Lee MG, J. Environ. Sci. Int., 23, 1143 (2014)
  19. You HN, Lee DH, Lee MG, Clean Technol., 19(4), 446 (2013)
  20. Zhang QH, Sun SY, Li SP, Jiang H, Yu JG, Chem. Eng. Sci., 62(18-20), 4869 (2007)
  21. El-Kamash AM, J. Hazard. Mater., 151(2-3), 432 (2008)