Korean Journal of Materials Research, Vol.26, No.7, 359-362, July, 2016
중질 탄산칼슘의 입자 크기와 첨가량 변화에 따라 제조된 수지 조성물의 강도 및 열변형온도
Strength and Heat Deflection Temperature of Resin Compounds Prepared Using Different Size and Content of Ground Calcium Carbonate
E-mail:
Mineral filler is used for resin compounds, because it increases the stiffness and thermal stability of a resin compound, and it also cuts down the cost. Calcium carbonate, silica, magnesium oxide, and others are used as filler materials in general, and the type of filler material, the size, and content can affect the physical properties of compounds. Those factors also influence the viscosity of resin mixtures and the workability, and should be adjusted by changing the contents of the filler, which depends on the size. In this study, five kinds of ground calcium carbonate, which were different in size, were used to produce polyester compounds ; the physical properties were compared with the filler size and contents. The mechanical properties were measured by bending strength and tensile strength, and the heat deflection temperature was obtained for thermal stability.
- Cho BG, Transactions of Materials Processing, 5, 187 (1996)
- Mareri P, Bastide S, Binda N, Crespy A, Compos. Sci. Technol., 58, 747 (1998)
- Moczo J, Pukanszky B, J. Ind. Eng. Chem., 14(5), 535 (2008)
- Ahmed S, Jones FR, J. Mater. Sci., 25, 4933 (1990)
- Edwards KL, Mater. Des., 26, 469 (2005)
- Wang SS, Chim ESM, J. Compos. Mater., 17, 114 (1983)
- Park CH, Lee WI, Yoo YE, Kim EG, J. Mater. Process. Technol., 111, 233 (2001)
- Kau HT, Polym. Compos., 8, 82 (1987)
- Leong YW, Abu Bakar MB, Ishak ZAM, Ariffin A, Pukanszky B, J. Appl. Polym. Sci., 91(5), 3315 (2004)
- Han CD, J. Appl. Polym. Sci., 18, 821 (1974)
- He H, Li K, Wang J, Sun G, Li Y, Wang J, Mater. Des., 32, 4521 (2011)
- Shui M, Appl. Surf. Sci., 220(1-4), 359 (2003)
- Lee YJ, Kim Y, Kim SR, Shin DG, Oh SC, Kwon WT, Defect Diffus. Forum, 365, 244 (2015)