화학공학소재연구정보센터
Solar Energy, Vol.132, 453-466, 2016
Air-PCM heat exchanger for peak load management: Experimental and simulation
Peak power consumption is becoming an increasing problem worldwide and particularly in France during the late afternoon winter periods. This paper describes the experimental and numerical studies carried out to investigate the potential of a PCM (phase change material) - Air heat exchanger, conceived for load shifting purposes. The objective is to possess the necessary tools for the development of advanced control strategies taking into account various factors: peak power reduction, thermal comfort and indoor air quality. The experimental approach involved the construction of a heat exchanger coupled to an experimental cell. The heat storage system is composed of a set of PCM (paraffin) plates, embedded in the exchanger and integrated in a ventilation system. In parallel, a numerical model was developed using the apparent heat capacity approach and the finite differences method. Furthermore, a series of characterization tests was conducted and the experimental data were used for model calibration and validation. The model was then coupled with a building simulation program, presenting good agreement between the integrated model prediction and the experimental data. Finally, a preliminary control strategy of the test cell is presented along with results demonstrating the capabilities of such system for peak load management. (C) 2016 Elsevier Ltd. All rights reserved.