화학공학소재연구정보센터
Polymer(Korea), Vol.40, No.4, 516-523, July, 2016
올레핀계 수지/파라핀 오일 컴파운드의 자기윤활 재료로의 응용
Application of Olefin Resin/Paraffin Oil Compounds for Self-lubricative Material
E-mail:
초록
본 연구에서는 대표적인 폴리올리핀계 고분자인 저밀도 폴리에틸렌(LDPE)과 고밀도 폴리에틸렌(HDPE)을 파라핀 오일과 함께 컴파운드하여 자기윤활소재로 응용하고자 하였다. 또한 컴파운드에서 용출되는 오일의 양을 제어하고, 오일에 의한 물리적 성질의 감소를 해결하고자 가교제인 dicumyl peroxide(DCP)를 이용하여 가교반응을 일으켰다. 또한 최근 여러 가지 고무소재를 대체하고 있는 물성보강제인 polyolefin elastomer(POE)를 첨가하여 경도를 낮추고 가교효과를 높이고자 하였다. DCP와 POE 함량을 달리한 컴파운드를 제작하고, 용출되는 오일 변화량, 기계적 성질, 열적 특성을 관찰하여 그 효과를 확인하였다. 결론적으로 DCP의 함량이 증가할수록 결합력 증가와 입체 그물 망상구조 형성으로 인해 오일 용출량이 감소되었다. 또한 인장강도와 파단 연신율이 크게 증가하였다. 그리고 POE의 함량이 증가할수록 인장강도는 감소하였지만, 증가된 탄성력과 고무상의 첨가로 인해 오일용출량과 경도를 낮추고, 파단 연신율을 크게 향상시켰다.
In this study, polyolefin resins and paraffin oil were compounded for self-lubricative material. In order to control the migration of oil, the compounds were crosslinked using dicumyl peroxide (DCP). The polyolefin elastomer (POE) was added to enhance crosslinking and decrease hardness. To obtain optimum amount of DCP and POE in the compounds, various concentrations of both were applied. The resultant compounds were tested for migration of oil, physical and thermal properties. In conclusion, the high DCP contents improve cohesion which leads to the formation of a threedimensional network in the compounds. Thus, an increase in DCP decreases migration of oil and increases the tensile strength and elongation. On the other hand, an increase in POE decreases the hardness, migration of oil and tensile strength while it increases elongation.
  1. Kim MH, J. Korean Soc. Precis. Eng., 30, 10 (2013)
  2. Lancaster JK, Wear, 141, 1459 (1990)
  3. Hutchings IM, Tribology: Friction and Wear of Engineering Materials, Edward Arnold, London, p 51 (1992).
  4. Tewari US, Sharma SK, Vasudevan P, J. Macromol. Sci.-Polym. Rev, 29, 1 (1989)
  5. Ghijsels A, Ente JJSM, Raadsen J, Int. Polym. Proc., 5, 284 (1990)
  6. Strong AB, Plastics: Materials and Processing, Pearson-Prentice Prentice-Hall, Upper Saddle River, 2006.
  7. Gonzalez J, Albano C, Ichazo M, Dıiaz B, Eur. Polym. J., 38, 2465 (2002)
  8. Bourry D, Favis BD, Polym. J., 39, 1851 (1998)
  9. Feng Y, Jin X, Hay JN, J. Appl. Polym. Sci., 69(12), 2469 (1998)
  10. Liao HT, Wu CS, Polym. Plast. Technol. Eng., 42, 1 (2003)
  11. Kim YM, Park JK, J. Appl. Polym. Sci., 61(13), 2315 (1996)
  12. An HJ, Ph. D. Dissertation, Pusan National University, Korea (1999).
  13. Harding RH, J. Cell. Plastics, 1, 385 (1965)
  14. Bartels T, Ullmann's Encyclopedia of Industrial Chemistry, Weinheim, 2005.
  15. Mtshali TN, Krupa I, Luyt AS, Thermochim. Acta, 47, 54 (2001)
  16. Shieh YT, Liu CM, J. Appl. Polym. Sci., 74(14), 3404 (1999)
  17. Khonakdar HA, Jafari SH, Hesabi MN, Compos. Pt. B-Eng., 69, 119 (2005)
  18. Kim DJ, Ph. D. Dissertation, Kyungpook National University, Korea (1999).
  19. Kim DH, Kim SC, Polym. Compos., 8, 208 (1987)
  20. Lambert WS, Phillips PJ, Polym. J., 31, 2077 (1990)
  21. Nichols JB, J. Appl. Phys., 25, 840 (1954)
  22. Svoboda P, Poongavalappil S, Theravalappil R, Svobodova D, Mokrejs P, Polym. Int., 62, 184 (2013)
  23. Li Y, Zhang Y, Zhang YX, Polym. Test, 22, 859 (2003)
  24. Su J, Chen SJ, Zhang J, Polym. Test, 30, 195 (2011)