화학공학소재연구정보센터
Chemical Engineering Science, Vol.148, 170-181, 2016
Autothermal reverse-flow reactors: Design and comparison of valve-operated and rotary systems
The valve-operated reverse-flow catalytic reactor is an efficient system for the treatment of air streams contaminated with small amounts of volatile organic compounds (VOCs). Nonetheless, it has two drawbacks when operated at low cycle periods: the emission of the volume without treatment present in the region close to the reactor input and an unavoidable reduction of the valve lifetime. Upon consideration that the use of shorter cycle periods would enable the design of more compact units, we investigated the option of operating with reverse flow by means of a rotary catalytic reactor. This alternative eliminates the necessity of valves for the flow reversal and enables to allot a small fraction of the total cross section to be fed with clean air and prevent the VOCs that remain close to the reactor input from being discharged to the atmosphere. The aim of this work is to analyse the treatment of an air stream contaminated with ethanol and ethyl acetate by means of mathematical simulation of reverse-flow operations in both valve-operated and rotary catalytic reactors. To that end, monolithic structures with square channels are assumed for both types of reverse-flow reactors, a design strategy is proposed and the results for both types of reactors are compared. It is concluded that the rotary reverse-flow reactor arises as a better option. (C) 2016 Elsevier Ltd. All rights reserved.