In order to use theological measurements as a tool to investigate fiber orientation in simple flows, the relationship between stress and fiber orientation must be understood. In this work, a sliding plate rheometer was used to measure the shear stress growth during the startup of simple shear flow of a polymer melt containing long glass fibers. The concentrations of the suspensions were varied from 10 to 40 wt% and tested over three shear rates spanning an order of magnitude. Significant shear thinning was observed in the suspension as concentration increased. Additionally, the magnitude of stress and breadth of the stress growth overshoot increased with concentration. A larger distinction between the different concentrations is observed in the shear stress growth than the measured evolution of fiber orientation. Measured values of fiber orientation were used with a semi-dilute stress equation to show that the fiber motion in these experiments was not responsible for the stress overshoot and that additional stress contributions must be considered. (C) 2014 Elsevier B.V. All rights reserved.