화학공학소재연구정보센터
Journal of Membrane Science, Vol.479, 246-255, 2015
PdCuAu ternary alloy membranes: Hydrogen permeation properties in the presence of H2S
PdCuAu ternary alloy membranes with different component compositions were synthesized by sequential electroless deposition of components onto porous stainless steel substrates. The ternary with the highest Au content, Pd69Cu14Au17, exhibited the highest hydrogen permeation flux, comparable to that of a Pd91Au9 membrane. Upon exposure to 100 ppm H2S/H-2 at 673 K for 24 h, all PdCuAu membranes experienced flux reductions of similar to 55%, followed by recovery to similar to 80% of the initial hydrogen flux upon reintroduction of pure hydrogen at 400 degrees C. Complete flux recovery after H2S exposure required hydrogen treatment at 500 degrees C. X-ray diffraction (XRD) analysis of the H2S-exposed PdCuAu membranes revealed fcc alloy structure with no evidence of bulk sulfide formation. In agreement with the XRD results, sulfur was not defected in the bulk of H2S-exposed samples by energy dispersive spectroscopy (EDS). However, analysis of H2S-exposed PdCuAu alloys by X-ray photoelectron spectroscopy (XPS) depth profiling revealed low, but measureable, amounts of sulfur in the near surface region, about 10 nm in depth. The depth profiles of samples after hydrogen recovery treatment showed significantly reduced sulfur content. These results indicate that H2S exposure causes flux loss in PdCuAu alloys through a surface-poisoning mechanism, and that the surface sulfide can be removed-and flux recovered-by high temperature treatment in hydrogen. (C) 2014 Elsevier B.V. All rights reserved.