화학공학소재연구정보센터
International Journal of Heat and Mass Transfer, Vol.89, 165-175, 2015
Experimental study and modeling of disturbance wave height of vertical annular flow
Disturbance waves play an important role in interfacial transfer of mass, momentum, energy and modeling of liquid film behavior in annular two-phase flow. In view of this, air water annular flow visualization experiments have been conducted at different gas and liquid velocity in a tubular test section having an inside diameter of 2.54 cm, and high-speed videos of vertical upflow have been analyzed to extract the liquid film and disturbance waves data by the Matlab code. The average thickness of thin liquid film has been studied as functions of both gas and liquid phase velocities, i.e. the thickness of thin liquid film increases with increasing liquid velocity and decreases with increasing gas flow, which is in the form of delta/D = 2.03Re(lf)(0.15)Re(g)(-0.6) according to the current experimental data fitting. On the basis of the thin liquid film thickness and taking the Kelvin-Helmholtz instability into account, i.e. from the perspective of the physical mechanism of disturbance wave formed, a semi-empirical model, i.e. Delta delta/D = 1400(u(g)"/u(f))(-1/3) ((rho(f)-rho(g)")g delta(2)/sigma)(5/8), of disturbance wave height has been proposed. Comparing the results of this model with the existing correlations available in the prediction of disturbance wave height, the model can satisfactorily predict the experimental data available in literature. (C) 2015 Elsevier Ltd. All rights reserved.