화학공학소재연구정보센터
Macromolecular Research, Vol.23, No.10, 944-951, October, 2015
Study on curing behaviors of epoxy acrylates by UV with and without aromatic component
E-mail:
Two kinds of epoxy acrylates, aromatic BAGEDA (bisphenol A diglycidyl ether diacrylate) and aliphatic BDGEDA (1,4-butanediol diglycidyl ether diacrylate), were prepared from BADGE (bisphenol A diglycidyl ether) and BDDGE (1,4-butanediol diglycidyl ether) respectively by reacting with acrylic acid. Synthesis and change in functional groups were confirmed by FTIR spectra. In the studies of UV curing behaviors by Photo-DSC (differential photocalorimetry), rate constants and conversions under isothermal conditions (T cure =30-80 °C) were determined by exothermic heat flows. Thus, maximum reaction rates of BAGEDA and BDGEDA were 4.06×10-2 s-1 and 5.01×10-2 s-1 respectively. UV curing behaviors were confirmed to follow Kamal equation model. Activation energies were 23.5 kJ/mol (E a1) and 12.0 kJ/mol (E a2) for BAGEDA, and 25.0 kJ/mol (E a1) and 11.3 kJ/mol (E a2) for BDGEDA. In the UV curing reaction of BAGEDA, the maximum reaction rate constants and conversions were increased by increasing reaction temperatures (T cure ), while in that of BDGEDA those were increased until 60 °C followed by a gradual decrease above 60 °C. These phenomena were understood by Gillham’s time-temperature-transformation (TTT) diagram in which curing behavior was determined by the glass transition temperature (T g ) of cured material at each reaction temperature.
  1. Pascault JP, Williams RJJ, Epoxy Polymers - New Materials & Innovations, Wiley-VCH, Weinheim, 2010.
  2. Bajpai M, Shukla V, Kumar A, Prog. Org. Coat., 44, 271 (2002)
  3. Gatiyatullina GV, Prochukhan YA, Battalov EM, Afzaletdinova NG, Murinov YI, J. Appl. Chem., 76, 623 (2003)
  4. Lim JK, Kim DK, Hwang JY, J. Korean Ind. Eng. Chem., 14(6), 818 (2003)
  5. Kim YB, Park SC, Kim HK, Hong JW, Macromol. Res., 16(2), 128 (2008)
  6. Apohan NK, Demirci R, Cakir M, Gungor A, Radiat. Phys. Chem., 83, 254 (2005)
  7. Bayramoglu G, Kahraman MV, Kayaman-Apohan N, Gungor A, Prog. Org. Coat., 57, 50 (2006)
  8. Chattopadhyay DK, Panda SS, Raju KVSN, Prog. Org. Coat., 54, 10 (2005)
  9. Kim SH, Chang HS, Park S, Song K, Polym.(Korea), 34(5), 469 (2010)
  10. Courtecuisse F, Belbakra A, Croutxe-Barghorn C, Allonas X, Dietlin C, J. Polym. Sci. A: Polym. Chem., 49(24), 5169 (2011)
  11. Do HS, Kim DJ, Kim HJ, J. Adhes. Interface, 4, 3 (2003)
  12. Park YJ, Lim DH, Kim HJ, Park DS, Sung IK, Int. J. Adhes. Adhes., 29, 710 (2009)
  13. Lecamp L, Youssef B, Bunel C, Lebaudy P, Polymer, 25, 6089 (1997)
  14. Voytekunas VY, Ng FL, Abadie MJM, Eur. Polym. J., 44, 3640 (2008)
  15. Andrzejewska E, Polymer, 37(6), 1039 (1996)
  16. Anseth KS, Wang CM, Bowman CN, Macromolecules, 27(3), 650 (1994)
  17. Kamal MR, Sourour S, Polym. Eng. Sci., 13, 59 (1973)
  18. Han S, Kim WG, Yoon HG, Moon TJ, J. Appl. Polym. Sci., 68(7), 1125 (1998)
  19. Han S, Kim WG, Yoon HG, Moon TJ, J. Polym. Sci. A: Polym. Chem., 36, 775 (1998)
  20. Lecamp L, Youssef B, Bunel C, Lebaudy P, Polymer, 40(6), 1403 (1999)
  21. Krevelen DWV, Properties of Polymers, 4th ed., Elsevier, Oxford, 1990.
  22. Gillham JK, Polym. Eng. Sci., 26, 1429 (1986)
  23. Scherzer T, Decker U, Polymer, 41(21), 7681 (2000)