화학공학소재연구정보센터
Energy & Fuels, Vol.29, No.2, 1076-1089, 2015
Construction of Skeletal Oxidation Mechanisms for the Saturated Fatty Acid Methyl Esters from Methyl Butanoate to Methyl PaImitate
A series of skeletal oxidation mechanisms for the saturated fatty acid methyl esters (FAMEs) from methyl butanoate to methyl palmitate were developed on the basis of a decoupling methodology with special emphasis on engine-relevant conditions from low to high temperatures at high pressures. When detailed H-2/CO/C1, reduced C2C3, and skeletal C4Cn submechanisms are introduced, the final mechanism consists of 42 species and around 135 reactions for each methyl ester. Both the high-temperature reactions of the methyl ester moiety and the low-temperature reactions of the aliphatic chain of the ester are included in the mechanism. The skeletal mechanisms were verified against experimental data in shock tubes, jet-stirred reactors, flow reactors, and premixed and opposite flames over the temperatures from 500 to 1700 K at pressures of 150 atm from fuel-lean to fuel-rich mixtures. An overall satisfactory agreement between the measurements and computational results was achieved for all of the saturated methyl esters, especially for the large saturated methyl esters with a long aliphatic main chain. The results also indicate that the ignition delay time and the consumption of reactants could be reproduced by employing a skeletal C4Cn submechanism reasonably well. In addition, the evolution of major products and flame propagation and extinction characteristics were satisfactorily reproduced because the detailed H-2/CO/C1 mechanism was used. The compact size makes it easy to integrate the mechanism into multi-dimensional computational fluid dynamics (CFD) simulation.