화학공학소재연구정보센터
Polymer(Korea), Vol.39, No.2, 329-337, March, 2015
실란화 반응으로 표면 개질된 다중벽 탄소나노튜브(MWCNTs)와 Methyl Methacrylate의 유화중합을 통한 MWCNTs/Poly(methyl methacrylate) 복합 입자 제조 및 그 형태학적 특성
Preparation of MWCNTs/Poly(methyl methacrylate) Composite Particles via the Emulsion Polymerization of Methyl Methacrylate Using MWCNTs Modified by Silanization Reaction and Their Morphological Characteristics
E-mail:
초록
본 연구에서는 다중벽 탄소나노튜브(MWCNTs)를 질산과 황산의 혼산으로 산화시켜 표면에 카르복시기를 도입 후, SOCl2와 1,4-butanediol을 사용하여 MWCNT-OH를 제조하였다. 제조된 MWCNT-OH는 3-methacryloxypropyltrimethoxylsilane(MPTMS)와 실란화 반응으로 methacrylate기가 도입된 MWCNT-MPTMS를 제조하였다. MWCNT-MPTMS와 methyl methacrylate(MMA)를 사용하여 유화중합법으로 MWCNT-MPTMS/PMMA 복합 입자를 제조하였다. 음이온 계면 활성제인 sodium dodecylbenzene sulfonate(SDBS)를 사용하여 유화중합한 MWCNTMPTMS/PMMA는 균일한 입도, 좁은 입도분포 및 계면에서의 화학결합으로 인하여 Tg가 순수 MWCNT를 사용하여 중합한 시료보다 3.4 oC 높아짐을 확인하였다.
In this study, multi-walled carbon nanotubes (MWCNTs) were oxidized with a mixture of nitric acid and sulfuric acid. After oxidation, oxidized MWCNTs were treated with thionyl chloride (SOCl2) and 1,4-butanediol (BD) in sequence at room temperature to introduce hydroxyl groups on the surface of MWCNTs. The prepared MWCNT-OH was silanized with 3-methacryloxypropyltrimethoxylsilane (MPTMS) to make MWCNT-MPTMS. The MWCNT-MPTMS was used as fillers in emulsion polymerization to make MWCNT-MPTMS/PMMA composite particles with 3 kinds of emulsifiers, hexadecyltrimethylammoniumbromide (CTAB) as a cationic, sodium dodecylbenzene sulfonate (SDBS) as an anionic and polyethylene glycol tert-octylphenyl ether (Triton X-114) as a nonionic emulsifier. Morphologies of composite emulsions were confirmed by a particle size analyzer (PSA) and a scanning electron microscope (SEM). Morphologies of emulsion polymerized MWCNT-MPTMS/PMMA with SDBS showed more uniform particle size distribution compared to those of other two emulsifiers used emulsions. MWCNT-MPTMS/PMMA showed 3.4 oC higher Tg compared to pristine MWCNT/PMMA due to covalent bond formation at interface of MWCNT-MPTMS and PMMA.
  1. Hong SH, Kim MH, Hong CK, Jung DS, Shim SE, Synthetic Met., 158, 900 (2008)
  2. Yun CH, Lee HS, Polym. Sci. Technol., 18(1), 4 (2007)
  3. Park SJ, Cho MS, Lim ST, Choi HJ, Jhon MS, Macromol. Rapid Commun., 24(18), 1070 (2003)
  4. Xie X, Gao L, Carbon, 45, 2365 (2007)
  5. Mathur RB, Pande S, Singh BP, Dhami TL, Polym. Compos., 29, 717 (2008)
  6. Oliva-Aviles AI, Aviles F, Sosa V, Carbon, 49, 2989 (2011)
  7. Kim HJ, Lee HJ, Park JW, J. Adhesion and Interface, 12, 43 (2011)
  8. Ma PG, Kim JK, Tang BZ, Carbon, 44, 3232 (2006)
  9. Joo YT, Jung KH, Kim Y, Polym.(Korea), 35(5), 395 (2011)
  10. Jeong DS, Nam BU, Polym.(Korea), 35(1), 17 (2011)
  11. Lee HJ, Park JS, Lee SR, Kim JM, Chang SM, Korean Chem. Eng. Res., 47(4), 470 (2009)
  12. Datsyuk V, Kalyva M, Papagelis K, Parthenios J, Tasis D, Siokou A, Kallitsis I, Galiotis C, Carbon, 46, 833 (2008)
  13. Prado LASA, Kopyniecka A, Chandrasekaran S, Broza G, Roslaniec Z, Schulte K, Macromol. Mater. Eng., 298, 359 (2013)
  14. Aviles F, Cauich-Rodriguez JV, Rodriguez-Gonzalez JA, May-Pat A, eXPRESS Polym. Lett., 5, 766 (2011)
  15. Park IC, Park M, Kim JK, Lee HJ, Macromol. Res., 6, 498 (2007)
  16. Lee HJ, Jang SH, Chang SM, Kim JM, Korean Chem. Eng. Res., 48(5), 609 (2010)
  17. Lee S, Ha K, Polym.(Korea), 37(6), 777 (2013)
  18. Jang HS, Hong J, Lee J, Shim SE, Korean Chem. Eng. Res., 46(4), 669 (2008)
  19. Kumar P, Bohidar HB, Physicochem. Eng. Aspects, 361, 13 (2010)
  20. Chen Y, Gunasinghe N, Wang XQ, Pang Y, RSC Adv., 3, 25097 (2013)
  21. Choi SM, Doh CW, Kim TH, Korean Patent 10-0874219 (2006)
  22. Jin HJ, Myeong SJ, Kang MS, Korean Patent 10-0728642 (2006)
  23. Colilla M, Salinas AJ, Regi MV, Chem. Mater., 18, 5676 (2006)
  24. Doh SJ, Kim C, Hwang KS, Lee SG, Lee SJ, Kim HY, Korean Ind. Eng. Chem., 11, 574 (2007)
  25. Kim C, Doh SJ, Hwang KS, Lee SG, Lee SJ, Kim HY, Korean Ind. Eng. Chem., 11, 578 (2007)
  26. Jin MY, Park K, Chung HK, Polym. Sci. Technol., 13(2), 180 (2002)