화학공학소재연구정보센터
Thin Solid Films, Vol.534, 380-383, 2013
Insertion of nanocrystalline diamond film and the addition of hydrogen gas during deposition for adhesion improvement of cubic boron nitride thin film deposited by unbalanced magnetron sputtering method
Cubic boron nitride (c-BN) thick film growth was attempted by the addition of hydrogen for residual stress reduction and by using a nanocrystalline diamond (NCD) buffer layer for stabilizing the turbostratic boron nitride interfacial layer. The c-BN films were deposited by the unbalanced magnetron sputtering method. Thin (100 mu m) Si strips (3 x 40 mm(2)) were used as substrates. A boron nitride target was used, which was connected to a radio frequency power supply at 400 W. High frequency power connected to a substrate holder was used for self-biasing of -40 V. The deposition pressure was 0.27 Pa with a flow of Ar (18 sccm)-N-2 (2 sccm) mixed gas. Hydrogen gas of 2 sccm was added to the Ar-N-2 mixed gas. The effect of the addition time of the hydrogen to the Ar-N-2 gas during deposition was investigated and found to be critical to the occurrence of the delamination of the c-BN film on the NCD buffer layer. As the addition of the hydrogen was delayed, the delamination started later. C-BN film of 3 mu m thickness adherent to the substrate was obtained. (C) 2013 Elsevier B.V. All rights reserved.