Materials Science Forum, Vol.495-497, 213-218, 2005
Optical grain size measurements: What is being measured? Comparative study of optical and EBSD grain sizes determination in 2D AI foil
Reflected light optical analysis and Electron Backscatter Diffraction (EBSD) analysis have been used to measure grain sizes in 2D Al foil samples, annealed for different times. There are significant differences in the results of the two techniques. It is shown that in Al it is possible to detect boundaries in optical images down to a misorientation angle of 7-8. Nevertheless, in most samples the critical angle of easy etching lies above 10. The observed differences in grain size measurements between optical analysis and EBSD analysis can be largely attributed to three phenomena: (1) individual samples may behave slighty differently due to differences in the effectiveness of etching (2) the grain size is heterogeneous over large areas and (3) the effect of etching is not only a function of misorientation angle but also grain boundary plane. Despite these uncertainties, optical analysis seems to be reliable for analysis of processes in which mainly grain boundaries with misorientation angle of > 10 are involved i.e. grain growth.