화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.11, No.3, 249-253, May, 2000
Calf혁과 Kip혁의 제조에 관한 연구(I) -나피 제조공정 중 탈모조건의 영향-
Study on Manufacture of Calf and Kip Leather(I) -Effect of the Unhairing Condition in Pelt Manufacture-
E-mail:
초록
Calf skin과 Kip skin을 이용하여 고품질의 구두혁을 제조하기 위해 탈모 처리가 이들의 나피 상태에 미치는 영향을 검토하였다. 나피 제조 공정중에서 탈모 공정의 영향이 매우 컸다. 화학적 처리, 일반 효소 처리, 그리고 바이오-테크 처리의 세 유형의 탈모 처리 방법 중에서 바이오-테크 처리가 가장 효율적이다. 또한, 바이오-테크 처리 방법은 원피 중량의 3배의 물, 4%의 Ca(OH)2와 0.5%의 Lupin LE-10을 첨가하여 약 25℃에서 18시간 정도 처리하는 것이 적절하다. Kip skin의 탈모율이 Calf skin에 비해 낮았지만, Kip skin의 섬유분리는 Calf skin보다 우수하다. 나피 상태에 대한 보다 정확한 정보를 얻기 위해 기존의 관능 및 시각 검사 외에 전자 현미경과 영상 분석기를 이용하여 유용한 정보를 얻었다.
This study investigates how pelt-states resulting from different unhairing methods would affect the manufacture of high quality Calf and Kip skin shoe leather. It was found that an unhairing process affected pelt manufacture most significantly. Among chemical treatment, enzymatic treatment, and bio-tech treatment applied to unhairing, bio-tech treatment was the most efficient. Moreover, this unhairing process was effective when addition of 3 times amount of water, 4% Ca(OH)2 and 0.5% Lupin LE-10 agent based on weight of raw skin, and successive treatment around 25℃ for 18 hours were applied. The unhairing rate of Kip skin was lower than that of Calf skin. However, in terms of fiber separation, the Kip skin was favorable than the Calf skin. To obtain more precise scientific information on pelt-state, new analytical instruments such as Scanning Electron Microscopy and Image Analyzer together with the conventional sensual tests were utilized.
  1. 송계원, 이무하, 채영석, "피혁과 모피의 과학," 선진문화사 (1990)
  2. Kronick P, Maleeff B, JALCA, 85, 122 (1990)
  3. Chen JM, Feairheller SH, Brown EM, JALCA, 86, 475 (1991)
  4. Chen JM, Feairheller SH, Brown EM, JALCA, 86, 487 (1991)
  5. 한광동, 김명웅, 한환수, "피혁공업화학," 선진문화사 (1999)
  6. Lee JS, Seo GT, Kim YC, Moon SK, Appl. Chem., 1(2), 664 (1997)
  7. Lee JS, Seo GT, Kim YC, Moon SK, Appl. Chem., 2(1), 488 (1998)
  8. Lee JS, Seo GT, Kim YC, Moon SK, Appl. Chem., 2(1), 492 (1998)
  9. Lee JS, Kim YK, Kim YC, Seo GT, Yie JE, Moon SK, APCChE 99, 2, 1093 (1999)
  10. Lee JS, Seo GT, Kim YC, Moon SK, J. Korean Ind. Eng. Chem., 10(5), 635 (1999)
  11. Lee JS, Seo GT, Kim YC, Moon SK, J. Korean Ind. Eng. Chem., 10(6), 934 (1999)
  12. Lee JS, Chun IK, Park JK, Seo GT, Kim YC, Moon SK, Appl. Chem., 2(2), 1032 (1998)
  13. Lee JS, Chun IK, Park JK, Seo GT, Kim YC, Moon SK, Appl. Chem., 2(2), 1036 (1998)
  14. Heidemamm E, "Fundamentals of Leather Manufacture," Eduard Roether KG, Darmstadt, 75 (1993)
  15. 서교택, 이종석, 유선종, 생산기술연구보고, 충청대학 생산기술연구소, 6(1), 53 (1995)
  16. (주)아이리스, 양대용, 서교택, 이종석, 장현석, 이은규, 강신춘, 배성렬, 문세기, "피혁 제조 방법," 특허출원, 96-58184 (1996)
  17. 한상덕, 이종석, 조영진, 오산대학 논문집, 12, 743 (1992)
  18. Han SD, Lee JC, Lee JS, Yang DY, Cho YJ, Kim HJ, J. Soc. Korea Ind. Sys. Eng., 18(36), 23 (1995)
  19. Han SD, Kim MY, Lee JS, Yoon YK, Cho YJ, Lee EK, J. Eng. Technol. Hanyang University, 5(1), 185 (1996)