화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.9, No.7, 961-967, December, 1998
신문용지 제조에 있어서 무기 충전제들의 영향
Effect of Inorganic fillers in Newsprint Papermaking
초록
종이제조에 있어서 종이의 광학적 성질 및 인쇄적성을 개선하기 위하여 여러 종류의 충전제가 사용되고 있다. 본 연구는 신문용지 제조에 있어서 여러 종류의 충전제, 즉 경질탄산칼슘(PCC), 중질탄산칼슘(GCC), 그리고 혼합된 충전제(PCC+미세활석(MVP) 또는 활석(talc), GCC+MVP 또는 talc))를 종이에 충전시켰을 때 종이의 여러 물성에 미치는 영향을 검토하였다. 얻어진 결과를 요약하면 다음과 같다. 1) 충전제를 지료전건중량당 5% 처리시 동일 처리조건하에서의 충전제 보류율은 PCC 처리시 GCC 처리시보다 16.8% 정도 높게 나타났으며, PCC 및 GCC를 처리했을 때 모두, 배합한 충전제의 입자경이 커질수록(PCC≤GCC
In order to improve the optical properties and printability of paper, various fillers are used in papermaking. This study was performed to investigate several fillers-precipitated calcium carbonate(PCC), ground calcium carbonate(GCC), and blends(PCC/talc or micro-talc(MVP) and GCC/talc or micro-talc(MVP)-for their effects on various newsprint properties. Results obtained from the study were summarized as follows ; 1) PCC treatment gave about 16.8% higher retention than GCC treatment at the filler level of 5% and the retention of filler in the handsheet increased as average particle size of mixed filler was increasing(PCC≤GCC
  1. Fairchild GH, TAPPI J., 75, 85 (1992)
  2. Gigac J, Kuna V, Schwartz J, TAPPI J., 78, 162 (1995)
  3. Sanders ND, Roth KJ, TAPPI J., 76, 209 (1993)
  4. Gill RA, Nordic Pulp Paper Res., 120 (1989)
  5. Passaretti JD, Young TD, Herman MJ, Duane KS, Evans DB, TAPPI J., 76, 135 (1993)
  6. Rahman I, TAPPI J., 29, 105 (1987)
  7. Bernier JF, Begin B, TAPPI J., 77, 217 (1994)
  8. Bown R, Paper Technol., 32 (1990)
  9. Allan GG, Carroll JP, U.S. Patent, 5,275,699 (1994)
  10. Westman L, Grundmark H, Petersson J, Nordic Pulp Paper Res., 113 (1989)
  11. Moore EE, TAPPI J., 59, 120 (1976)
  12. Pelten RH, Allen LH, Nugent HM, Pulp Paper Canada, 81, 54 (1980)
  13. Abubakr SM, Hrutfiord BF, Reichert TW, McKean WT, TAPPI J., 80, 143 (1997)
  14. Arslan K, Bousfield DW, Genco JM, TAPPI J., 80, 143 (1997)