화학공학소재연구정보센터
Chemical Engineering Science, Vol.107, 277-289, 2014
Multistage centrifugation method for determination of filtration and consolidation properties of mineral and biological suspensions using the analytical photocentrifuge
The article describes a new method of multistage centrifugation (MC) for determination of filterability (local filtration and consolidation properties) of mineral and biological suspensions. The method comprises centrifugal compression-permeability and sedimentation-consolidation experiments, performed with the help of analytical photocentrifuge at different centrifugal rotation speeds. The experimental procedure implies determination of the analytical centrifugation curves: dependencies of (i) sediment height on centrifugal acceleration in sedimentation-consolidation experiments and (ii) permeate volume and filter cake dryness on centrifugation time and centrifugal acceleration in filtration-consolidation experiments. The combined analysis of these curves yields the pressure dependencies of local cake dryness, specific cake resistance, and consolidation coefficient in the wide range of solid pressure (5 x 10(3)-5 x 10(5) Pa). Application of MC requires a relatively small quantity of suspension (about 2 ml). The method was tested for suspensions with different filterabilities and compressibilities: calcium carbonate, kaolin and yeast suspensions. The pressure dependencies of cake dryness, specific cake resistance, and consolidation coefficient, determined by MC, were in correspondence with those determined in the series of conventional constant pressure dead-end filtration-consolidation experiments. (C) 2013 Elsevier Ltd. All rights reserved.