화학공학소재연구정보센터
Chemical Engineering and Processing, Vol.61, 23-29, 2012
A comparison of the degree of intensification due to the use of additives in ultrasonic horn and ultrasonic bath
The inherent cavitational activity in the ultrasonic horn and ultrasonic bath can be further enhanced using different additives which can also aid in decreasing the processing cost of the operation. The present work deals with evaluation of different additives for enhancing the cavitational effects using a model reaction of potassium iodide oxidation. Two reactors with varying capacity have been used with an objective of understanding the dependency of scale of operation on the efficacy of additives. The effects of various additives such as air, solid particles like titanium dioxide, salts like sodium chloride and radical promoters such as hydrogen peroxide and carbon tetrachloride have been investigated. It has been observed that depending on the mechanism of intensification, the beneficial effects are strongly dependent on the reactor operating conditions, i.e. intensity and frequency of irradiations, which control the inherent cavitational activity. It is desirable to select an additive which can give additional reaction mechanisms in the system to aid the desired application under question. It has been conclusively established that for effective scale up it would be essential to provide an optimum power dissipation levels through a wider area of irradiation for the transducers. (c) 2012 Elsevier B.V. All rights reserved.