화학공학소재연구정보센터
Applied Surface Science, Vol.289, 472-477, 2014
Low electrical potential anode modified with Fe/ferric oxide and its application in marine benthic microbial fuel cell with higher voltage and power output
Low voltage and power output limit the widespread application of marine benthic microbial fuel cell (BMFCs). To increase the cell power, a Fe/Ferric oxide modified anode fabricating by electrolytic deposition is reported here. The novel anode has a lower surface contact angle and higher wettability, which favors the adhesion of bacteria. It is firstly demonstrated that the electrical potential of the modified anode is about -775 mV, much lower than that of the plain graphite (about -450 mV). Open circuit potential of BMFC with the modified anode is about 1050 +/- 50 mV, while the potential for the plain cells is only 700 +/- 50 mV. In comparison with the plain graphite, the modified anode presents a 393-fold exchange current density and a higher kinetic activity. The output power reaches 7.4 x 10(-2) mW cm(-2), 17.4-fold higher than that of the plain graphite. A composite mechanism of both chemical and microbial enhancement of the modified anode is proposed to explain its excellent electrochemical performance. The modified anode has potential for high-power output cell and novel voltage-booster design to make the BMFC utilization feasibility. (C) 2013 Elsevier B.V. All rights reserved.