화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.20, No.3, 911-915, May, 2014
Effect of mixed alcohol reactants on ultrasonic alcoholysis of canola oil
E-mail:
The effect of ultrasonic irradiation energy was analyzed according to the kinds of alcohol in the ultrasonic alcoholysis. The ultrasonic irradiation energy density of ethanol (792.9 kJ/L) is higher than methanol (649.8 kJ/L). The optimum mixing ratio of canola oil, methanol and ethanol was proven as 1, 5 and 1, respectively. Also the optimum reaction conditions for the ultrasonic alcoholysis were a reaction temperature of 60 ℃, ultrasonic irradiation power of 500 W, reaction time of 50 min, and alkaline catalyst (KOH) content of 0.6 wt.%. From these results, the optimum alcohol mixing ratio and the optimum process conditions were determined, with good quality biodiesel being manufactured.
  1. Veljkovic VB, Avramovic JM, Stamenkovic OS, Renew. Sust. Energ. Rev., 16, 1193 (2012)
  2. Manh DV, Chen YH, Chang CC, Chang MC, Chang CY, J. Taiwan Institute of Chem. Eng., 42, 640 (2011)
  3. Salamatinia B, Mootabadi H, Bhatia S, Abdullah AZ, Fuel Process. Technol., 91(5), 441 (2010)
  4. Lam MK, Lee KT, Fuel Process. Technol., 92(8), 1639 (2011)
  5. Hanh HD, Nguyen TD, Okitsu K, Nishimura R, Maeda Y, Renew. Energy, 34(3), 780 (2009)
  6. Deng X, Fang Z, Liu YH, Energy Conv. Manag., 51(12), 2802 (2010)
  7. Zhu L, Cheung CS, Zhang WG, Huang Z, Appl. Therm. Eng., 31, 2271 (2011)
  8. Manh DV, Chen YH, Chang CC, Chang CY, Minh CV, J. Taiwan Institute of Chem. Eng., 43, 368 (2012)
  9. Zhu L, Cheung CS, Zhang WG, Huang Z, Sci. Total Environ., 408, 914 (2010)
  10. Thanh LT, Okitsu K, Sadanaga Y, Takenaka N, Maeda Y, Bandow H, Bioresour. Technol., 101(2), 639 (2010)
  11. Ji J, Wang J, Li Y, Yu Y, Xu Z, Ultrasonics, 44, 411 (2006)
  12. Hingu SM, Gogate PR, Rathod VK, Ultrasonics, 17, 827 (2010)
  13. Issariyakul T, Kulkarni MG, Dalai AK, Bakhshi NN, Fuel Process. Technol., 88(5), 429 (2007)
  14. Le TT, Okitsu K, Sadanaga Y, Takenaka N, Maeda Y, Bandow H, Bioresour. Technol., 101(14), 5394 (2010)
  15. Thanh LT, Okitsu K, Sadanaga Y, Takenaka N, Maeda Y, Bandow H, Bioresour. Technol., 101(2), 639 (2010)
  16. Lee SB, Lee JD, Hong IK, J. Ind. Eng. Chem., 17(1), 138 (2011)
  17. Mendow G, Veizaga NS, Sanchez BS, Querini CA, Bioresour. Technol., 102(22), 10407 (2011)
  18. Yu D, Tian L, Wu H, Wang S, Wang Y, Ma D, Fang X, Process Biochem., 45, 519 (2010)
  19. Santos FFP, Rodrigues S, Fernandes FAN, Fuel Process. Technol., 90(2), 312 (2009)
  20. Salamatinia B, Abdullah AZ, Bhatia S, Fuel Process. Technol., 97, 1 (2012)
  21. Ramirez-del-Solar M, de la Rosa-Fox N, Esquivias L, Zarzycki J, J. Non-Cryst. Solids, 121(1-3), 40 (1990)
  22. Stamenkovic OS, Velickovic AV, Veljkovic VB, Fuel, 90(11), 3141 (2011)
  23. Lee SB, Han KH, Lee JD, Hong IK, J. Ind. Eng. Chem., 16(6), 1006 (2010)