화학공학소재연구정보센터
Polymer(Korea), Vol.38, No.2, 138-143, March, 2014
Acrylate기를 갖는 Polydimethylsiloxane계 코팅 액의 제조와 그 특성
Preparation and Properties of Coating Materials of Polydimethylsiloxane with Acrylate Groups
E-mail:
초록
α,ω-Hydroxypropyl기를 갖는 polydimethylsiloxane을 합성하고 이를 hexamethylenediisocyanate(HDI)의 고리화 반응으로 제조된 HDI trimer와 반응시켜 말단에 이소시아네이트 기를 갖는 PDMS 변성 urethane(PSU)을 제조하였다. 이소시아네이트기를 갖는 PSU와 2 - hydroxyethylmethacrylate를 urethane 반응으로 acrylate기를 갖는 PDMS 변성 urethane base 수지(PSUA)를 제조하였으며, 이를 FTIR, NMR로 구조를 확인하여 분석하였다. 제조한 base 수지에 아크릴계 경화제, 광 개시제, 용매들을 혼합하여 코팅 액을 제조하였으며 이를 PET 필름에 도포하고 자외선으로 조사하여 고경도의 유연성을 갖는 코팅 막을 얻었다. 얻어진 코팅 막의 광 투과도는 89.7%, 연필경도는 3H, 접촉각은 88° 였다.
α,ω-Hydroxypropyl polydimethylsiloxane (HO-PDMS) was prepared by hydrosilylation of hydrogen terminated polydimethylsiloxane with allyl alcohol. Polydimethylsiloxane modified urethane with isocyanate group (PSU) was prepared from cyclic trimer of hexamethylenediisocyanate with HO-PDMS. PDMS modified urethane base resin with acrylic group (PSUA) was prepared from the urethane reaction of PSU with isocyanate group and 2-hydroxyethylmethacrylate. Their structures were characterized using FTIR and NMR. Coating materials were prepared by mixing PSUA, acrylic hardner, photo-initiator, and solvent and coated on PET film to obtain flexible and hard coating film by UV irradiation. Transparency of coating film was 89.7%, contact angle, 88°, and pencil hardness, 3H.
  1. Peinado C, Salvador EF, Baselga J, Catalina F, Macromol. Chem. Phys., 202, 1924 (2001)
  2. Zhang JY, Windall G, Boyd IW, Appl. Surf. Sci., 186(1-4), 568 (2002)
  3. Decker C, Viet TNT, Decker D, Weber-Koehl E, Polymer, 42(13), 5531 (2001)
  4. Paul S, Editor, Surface Coatings: Science & Technology, John Wiley & Sons Ltd, England (1996)
  5. Zorll U, Editor, European Coatings Handbook, Vincentz Berlag, Germany (2000)
  6. LI H, Zhang ZB, Hu CP, Wu SS, Ying SK, Eur. Polym. J., 40, 2195 (2004)
  7. Chuyin Z, Xingyuan Z, Jiabing D, Chenyan B, Prog. Org. Coat., 63, 238 (2008)
  8. Kojima S, Polym. Eng. Sci., 33, 253 (1993)
  9. Yilgor I, Wilkes GL, McGrath JE, Polym. Prep., 24, 80 (1983)
  10. Iojoiu C, Abadie MJM, Harabagiu V, Pinteala M, Simionescu BC, Eur. Polym. J., 36, 2115 (2000)
  11. Nabeth B, Gerard JF, Pascault JP, J. Appl. Polym. Sci., 60(12), 2113 (1996)
  12. Choi JH, Kim HJ, J. Ind. Eng. Chem., 12(3), 412 (2006)
  13. Naghash HJ, Mallakpour S, Mokhtarian N, Prog. Org. Coat., 55, 375 (2006)
  14. Tang C, Liu W, Ma S, Wang Z, Hu C, Prog. Org. Coat., 10, 1016 (2010)
  15. Joe YG, Lee JW, Kim JY, Suh KD, Appl. Chem., 2(2), 616 (1998)
  16. Andrzejewska E, Prog. Polym. Sci., 26, 605 (2001)
  17. Elsvernd CS, Spinu M, Krukonis VJ, Gallagher PM, Mohanty DK, McGrath JE, Silicone-based Polymer Science, American Chemical Society, Washington, p.145 (1990)
  18. Lee BC, Kang DW, Polymer, 28, 143 (2004)