화학공학소재연구정보센터
Heat Transfer Engineering, Vol.35, No.6-8, 651-663, 2014
Influence of Lubricant on the Nucleate Boiling Heat Transfer Performance of Refrigerant-A Review
This review provides an overview of the lubricant on the heat transfer performance pertaining to nucleate boiling. It appears that the effect of individual parameter on the heat transfer coefficient may be different from study to study. This is associated with the complex nature of lubricant and some compound effects accompanying the heat transport process. Some important effects such as oil concentration, heat flux, geometric configuration, saturation temperature, thermodynamic and transport properties, miscibility, foaming, and additional surface active agent are reported and discussed. In general, the heat transfer coefficient is impaired provided the oil concentration is sufficient high (e.g., >7%), and this is applicable to smooth and structured tubes. But normally structured tubes tend to suffer more from lubricant, yet this is especially conspicuous when the size of the reentrant channel is small. On the other hand, foaming and partial miscibility seem to benefit the heat transfer coefficient.