화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.5, No.5, 857-861, October, 1994
자외선 경화형 하이브리드 코팅의 광열분석적 연구
Photo-DSC Studies of UV-Curable Hybrid Coating Systems
초록
독성이 있는 아크릴 모노머를 비닐에테르로 대체시켜 우레탄아크릴레이트와 배합시키는 것을 특징으로 하는 자외선 경화형 하이브리드 시스템을 조사하였다. 일반적으로 하이브리드 시스템의 코팅 물성은 자유 라디칼계보다은 우수하나 양이온계보다는 열세하게 나타났다. 아크릴계 올리고머 함량이 70% 이상으로 배합된 경우의 하이브리드계는 코팅물성과 경화물성면에서 자유라디칼계와 양이온계보다 뛰어나게 나타났다. 다양한 코팅 시스템의 경화과정을 조사하기 위해서 광열분석기를 적용하였다. 그 결과 코팅 배합물의 경화속도에 미치는 결정적인 인자는 배합물 특성에 따라 달라짐을 알 수 있었다. 동류의 하이브리드계의 경우에는 광경화개시제의 효율보다는 모노머/올리고머 비가 더욱 중요함을 알 수 있었다.
UV curable hybrid systems have been investigated in the urethane acrylate based formulations where potentially irritant acrylate monomers have been substituted by vinyl ethers. Generally, among the systems studied, coating properties of hybrid system are superior to those of free radical hut inferior to those of cationic systems. When the content of acrylic oligomer is above 70%, however, hybrid system could render an excellent combination of coating and curing properties which outperforms both cationic and free radical systems. Photo-DSC has been used to follow the progress of crosslinking of various coating systems. Results imply that the critical factors in determining the curing rates of coating formulations are different depending upon the formulation characteristics. In the same type of hybrid formulations, the monomer/oligomer ratio rather than photoinitiator efficiency is the critical factor determining the curing rate of the systems.
  1. Tsao JH, Ketley AD, U.S. Patent, No. 4,156,035, May 22 (1979)
  2. Ketley AD, Tsao JH, J. Radiation Curing, April, 22 (1979)
  3. Perkins WC, J. Radiation Curing, Jan., 16 (1981)
  4. Vara FJ, Dougherty JA, Radtech Europe '89 Conference Papers, Florence, October 523 (1989)
  5. Suerbrunn SR, Armbruster DC, Dallas G, Radtech Asia '91 Proceedings, April, 522, Osaka, Japan (1991)
  6. Vara FJ, Dougherty JA, Radtech Asia '88 Proceedings, 491, Tokyo, Japan (1988)
  7. Jonsson S, Radtech Asia '93 Proceedings, 599, Tokyo, Japan (1933)
  8. Chae KH, Park IJ, Choi MH, Bull. Korean Chem. Soc., 14, 614 (1993)
  9. Dougherty JA, Vara FJ, Radtech North America, Conference Proceedings, 372, New Oleans, U.S.A. (1988)
  10. Dougherty JA, Jurczak EA, Vara FJ, Burlant WJ, Radtech Asia, Proceedings, 106, Tokyo, Japan (1993)
  11. Abadie MJM, Eur. Coat. J., 11, 788 (1991)
  12. Abadie MJM, Eur. Coat. J., 7, 518 (1993)
  13. Sestak J, Berggren G, Thermochim. Acta, 3, 1 (1971) 
  14. Kenny JM, J. Appl. Polym. Sci., 51(4), 761 (1994)