화학공학소재연구정보센터
Journal of the Korean Industrial and Engineering Chemistry, Vol.5, No.3, 419-424, June, 1994
유지화합물에 의해 생성된 철판의 기름얼룩 방지
Prevention of Oil Stain on Steel Induced by Fat and Oil Compounds
초록
금속공작유에 의해 발생하는 기름얼룩에 대하여 6종의 유지화합물(rapeseed oil, oleic acid, methyl oleate, oleyl alcohol, lauryl amine, lanolin)에 따른 영향을 조사하였다. 시험방법으로는 MIL-C-22235A의 방법을 사용하였으며 base oil(spindle oil; 1.5wt%의 황함유)에 유지화합물 l0wt%와 항산화제 0.5wt%를 첨가시켜 도유용 sample을 만들었다. 시험결과 항산화제 중 B. T가 B. H. T.와 T. C. P보다는 기름얼룩 억제에 효과적이었으며, 산가는 기름얼룩 방지에 나쁜 영향을 미쳤다. 유지화합물의 화학구조에 의해 예견되는 바와 같이 oleic acid는 철이온과 반응이 가능하므로 시편에 심하게 기름얼룩을 발생시켰다.
An oil stain on the steel induced by metal working oil was studied on the six kinds of fat and oil compounds(rapeseed oil, oleic acid, methyl oleate, oleyl alcohol, lauryl amino, and lanolin) by MIL-C-22235A test. The samples used for the printing on the oil stain plates were prepared by the addition of fat and oil compounds(l0wt% ) and antioxidants(B. H. T, B. T, T. C. P; 0.5wt%) to base oil(spindle oil; 1.5wt% of sulfur). An analysis based on the experimental data indicated that B.T was more effective than B. H. T and T. C. P as antioxidant for inhibiting oil stains. And acid values exerted a bad influence upon the preventation of oil stains. As expected by the chemical structure of fat and oil compound, oleic acid that could react with iron ions produced more stains on the steel pannel.
  1. Muffley HC, Hong V, Bootin D, Corrosion, 1, 441 (1956)
  2. Gummiski RD, J. Inst. Metals, 38, 481 (1960)
  3. Messina J, Mertway A, Lubrication Eng., 23, 46 (1967)
  4. Naruse T, J. Jpn. Oil. Chem. Soc., 17, 512 (1968)
  5. Tanaka K, J. Jpn. Oil Chem. Soc., 20, 11 (1976)
  6. Tanaka K, J. Jpn. Oil Chem. Soc., 25, 756 (1976)
  7. Martin GF, RIA Laboratory Report, 50, 530 (1950)
  8. Oyabu D, Ota S, J. Jpn. Oil Chem. Soc., 18, 699 (1969)
  9. Nose Y, Masuko A, J. Jpn. Oil Chem. Soc., 17, 143 (1974)
  10. Cotton JB, Metal Corr., 1, 590 (1963)