화학공학소재연구정보센터
Applied Chemistry for Engineering, Vol.24, No.3, 239-246, June, 2013
가압성형 방법에 의한 발포유리의 제조공정
Production Process of Foamed Glass by Compressive Shaping
E-mail:
초록
기존의 발포유리 제조공정의 원리는 원료유리분말을 거푸집에 담아 발포소성시키며, 발포소성 후에 발포체를 거푸집과 분리 후에 서냉 열처리를 하는 것이다. 이러한 이유로 기존의 발포유리 제조공정은 연속생산이 불가능하다. 본 연구에서는, 발포유리의 연속생산공정을 개발하기 위해서 거푸집을 사용하지 않는 대신, 원료유리분말을 가압성형하여 먼저 성형체를 만들고, 이 성형체를 발포시켜 발포유리를 생산하는 새로운 발포유리제조공정의 가능성을 타진하였다. 수화된 소다석회 유리분말을 사용하고 유리의 발포에 가장 핵심적인 발포제를 달리한 가압성형체를 발포소성시키는 실험 결과를 통해서, 거푸집을 사용하지 않고서도 발포유리의 연속생산공정이 가능할 수 있음을 확인하였다.
Principle of foamed glass manufacturing process first starts with putting vitreous material powder into a mold. After the foaming calcination, foamed body should be annealed after separation from the mold. For this reason, existing manufacturing process could not be a continuous type process. In this study, in order to develop a continuous production process of foamed glass, the possibility of new foam glass manufacturing process was investigated by foaming calcination of the compact body obtained from compression-molding of vitreous raw materials in stead of using a mold. Through the experimental results of the foaming calcination of the compact body with adding various foaming agents such as Na2CO3, CaCO3 and petroleum coke, into hydrated soda-lime vitreous raw materials, it was shown that developing a continuous process without using any molds for manufacturing foamed glass would be possible.