화학공학소재연구정보센터
Macromolecular Research, Vol.21, No.5, 519-528, May, 2013
Emulsion grafting vinyl monomers onto starch for reinforcement of styrene-butadiene rubber
E-mail:
Three types of modified starches (MST): Starch-g-poly(butyl acrylate) (ST-g-PBA), starch-g-poly (methyl methacrylate) (ST-g-PMMA) and starch-g-polystyrene (ST-g-PS) latexes were successfully synthesized by emulsion polymerization. These synthesized MST latexes were then directly compounded with styrene-butadiene rubber (SBR) latex in order to prepare MST/SBR compounds. The vulcanization characteristics, morphology, swelling ratio, mechanical and dynamic mechanical properties were investigated. Results indicated that the incorporation of starch or MST led to both an increase in the torque values and the cure rate of SBR compounds. MST with a particle size of approximately 200?400 nm uniformly dispersed in the SBR matrix, indicating the significantly improved dispersion. MST/SBR compounds exhibited better mechanical properties compared with starch/SBR (ST/SBR) compounds. Among the MST/SBR compounds, ST-g-PMMA/SBR compounds showed optimum tensile strength, which was even higher than that of carbon black/SBR (CB/SBR) compounds with the same loading of fillers. Finally, the reinforcing mechanism of MST in the SBR matrix was discussed.
  1. Burrowes G, Rodgers B, Rubber Compounding Chemistry and Applications, Rodgers B, Ed., Marcel Dekker, Inc., New York, 2004.
  2. Wahab MA, Mottaleb MA, Korea Polym. J., 9(6), 297 (2001)
  3. Dufresne A, Vignon MR, Macromolecules, 31(8), 2693 (1998)
  4. Ning W, Xingxiang Z, Xuechen W, Haihui L, Macromol. Res., 17(5), 285 (2009)
  5. Wu YP, Ji MQ, Qi Q, Wang YQ, Zhang LQ, Macromol. Rapid Commun., 25(4), 565 (2004)
  6. Zou JW, Zhang F, Huang J, Chang PR, Su ZM, Yu JH, Carbohydr. Polym., 85, 824 (2011)
  7. Ishak ZAM, Ismail H, Eur. Polym. J., 31, 259 (1995)
  8. Ismail H, Nizams JM, Abdul Khalil HPS, Polym. Test, 20, 125 (2001)
  9. Smail H, Rozman HD, Jaffri RM, Mohd Ishak ZA, Eur. Polym. J., 33, 1627 (1997)
  10. Wu QJ, Henriksson M, Liu X, Berglund LA, Biomacromolecules, 8(12), 3687 (2007)
  11. Corvasce FG, Linster TD, Thielen G, U. S. Patent 5672639 (1997).
  12. Corvasce FG, Fourgon FAJ, EP1293530 (2003).
  13. Angellier H, Molina-Boisseau S, Dufresne A, Macromolecules, 38(22), 9161 (2005)
  14. Kim JY, Park DJ, Lim ST, Cereal Chem., 85, 182 (2008)
  15. Ma X, Jian R, Chang PR, Yu J, Biomacromolecules, 11, 3314 (2008)
  16. Mele P, Angellier-Coussy H, Molina-Boisseau S, Dufresne A, Biomacromolecules, 12(5), 1487 (2011)
  17. Liu C, Shao Y, Jia D, Polymer, 49(8), 2176 (2008)
  18. Wang ZF, Peng Z, Li SD, Lin H, Zhang KX, She SD, Fu X, Compos. Sci. Technol., 69, 1797 (2009)
  19. Wu YP, Qi Q, Liang GH, Zhang LQ, Carbohydr. Polym., 65, 109 (2006)
  20. Valodkar M, Thakore S, Carbohydr. Polym., 86, 1244 (2011)
  21. Mamaghani MY, Pishvaei M, Kaffashi B, Macromol. Res., 19(3), 243 (2011)
  22. Han H, Lee J, Park DW, Shim SE, Macromol. Res., 18(5), 435 (2010)
  23. Baek HH, Lee JM, Cho JE, Cho JH, Kim JH, Cheong IW, Macromol. Res., 18(1), 53 (2010)
  24. Hwang JH, Ryu H, Cho UR, Elastomer, 43, 221 (2008)
  25. Lee MS, Ryu H, Cho UR, Polym.(Korea), 34(1), 58 (2010)
  26. Li MC, Mun YJ, Cho UR, Elast. Compos., 45, 272 (2010)
  27. Li MC, Lee JK, Cho UR, J. Appl. Polym. Sci., 125(1), 405 (2012)
  28. Pavia DL, Lampman GM, Kriz GS, Vyvyan JR, in Introduction To Spectroscopy, 4th Eds., Brooks/Cole Cengage Learning, 2009, CA, pp 47-70.
  29. Kaewtatip K, Tanrattanakul V, Carbohydr. Polym., 73, 647 (2008)
  30. Choi SS, Park BH, Song HH, Polym. Adv. Technol., 15, 122 (2004)
  31. Lopez-Manchado MA, Arroyo M, Herrero B, Biagiotti J, J. Appl. Polym. Sci., 89(1), 1 (2003)
  32. Mathew G, Rhee JM, Lee YS, Park DH, Nah C, J. Ind. Eng. Chem., 14(1), 60 (2008)
  33. Jacob M, Thomas S, Varughese KT, Compos. Sci. Technol., 64, 955 (2004)
  34. Mariano RM, Picciani PHD, Nunes RCR, Visconte LLY, J. Appl. Polym. Sci., 120(1), 458 (2011)
  35. Ismail H, Shaari SM, Othman N, Polym. Test, 30, 784 (2011)
  36. Butler J, Freakley PK, Rubb. Chem. Technol., 65, 374 (1991)
  37. Nunes RCR, Mano EB, Polym. Compos., 16, 421 (1995)
  38. Maldas D, Kokta BV, Daneaulf C, J. Appl. Polym. Sci., 37, 751 (1989)
  39. Bledzki AK, Gassan J, Prog. Polym. Sci, 24, 221 (1999)
  40. Stankovich S, Piner RD, Nguyen ST, Ruoff RS, Carbon, 44, 3342 (2006)
  41. Ziegel KD, Romanov A, J. Appl. Polym. Sci., 17, 1119 (1973)
  42. John MJ, Anandjiwala RD, Compos. Pt. A-Appl. Sci. Manuf., 40, 442 (2009)