화학공학소재연구정보센터
Journal of Applied Polymer Science, Vol.57, No.1, 7-23, 1995
Effects of Low-Profile Additives on the Curing Reaction of Unsaturated Polyester Resins
The effect of low-profile additives (LPA), i.e., poly(vinyl acetate) (PVAC) and poly(methyl methacrylate) (PMMA), on the curing reaction of unsaturated polyester (UPE) resins was studied by gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The curing reaction profiles were determined by DSC, while GPC was used to investigate the variation of the sizes of microgel particles during the early stage of curing reaction in UPE-styrene resins. The DSC experimental results indicated that the curing reaction rate decreased as the concentration of LPA increased. At a fixed LPA concentration, the curing reaction rate was slower for resins mixed with LPA possessing worse compatibility with UPE resins. During the early stage of curing reaction, the size and structure of the UPE microgels formation strongly depended on the concentration of LPA and also on the compatibility of the components in the curing system. The experimental results of this study revealed that the concentration of LPA and the compatibility of LPA with UPE resins had a strong influence on the polyester microgel formation and the curing behavior.