3423 - 3427 |
Selective separation of Hg(II), Pt(II), and Pd(II) ions using silica-gel-bound macrocycles incorporating O2N2- and O3N2-donor sets Kim J, Han CW, Shim MS, Kim SJ |
3428 - 3434 |
Influence of clay binders on the performance of Pd/HZSM-5 catalysts for the hydroisomerization of n-butane Dorado F, Romero R, Canizares P |
3435 - 3444 |
Kinetic study of binuclear manganese-tris(2-methyl pyridyl)amine complex used as a catalyst for wood pulp bleaching Tzedakis T, Benzada Y, Comtat M |
3445 - 3450 |
Kinetics of the oxidative degradation of aqueous monoethanolamine in a flue gas treating unit Supap T, Idem R, Veawab A, Aroonwilas A, Tontiwachwuthikul P, Chakma A, Kybett BD |
3451 - 3458 |
On the modeling of the copper block combustion front quenching technique to investigate solid-solid self-propagating high-temperature reactions Cincotti A, Murgia G, Orru R, Cao G |
3459 - 3466 |
Melt polycondensation of bisphenol A polycarbonate by forced gas sweeping process II. Continuous rotating-disk reactor Woo BG, Choi KY, Song KH |
3467 - 3474 |
Kinetic modelling of the transformation of aqueous ethanol into hydrocarbons on a HZSM-5 zeolite Gayubo AG, Tarrio AM, Aguayo AT, Olazar M, Bilbao J |
3475 - 3483 |
Microstructured rhodium catalysts for the partial oxidation of methane to syngas under pressure Fichtner M, Mayer J, Wolf D, Schubert A |
3484 - 3494 |
Hydroconversion of hydrocarbons over HZSM5 and Mo-HZSM5 catalysts: A FTIR and flow reactor study Gutierrez-Alejandre A, Gonzalez H, Ramirez J, Busca G |
3495 - 3501 |
Kinetic model of a methacrylate-based monolith polymerization Mihelic I, Krajnc M, Koloini T, Podgornik A |
3502 - 3510 |
H2S adsorption/oxidation on adsorbents obtained from pyrolysis of sewage-sludge-derived fertilizer using zinc chloride activation Bagreev A, Locke DC, Bandosz TJ |
3511 - 3522 |
Porous media characterization using mercury porosimetry simulation. 1. Description of the simulator and its sensitivity to model parameters Mata VG, Lopes JCB, Dias MM |
3523 - 3529 |
High-shear-rate behavior of radial hydrogenated styrene-isoprene and block ethylene-propylene copolymer solutions Erickson DC, Li DQ, White TM, Gao J |
3530 - 3539 |
Production of antibiotic nanoparticles using supercritical CO2 as antisolvent with enhanced mass transfer Chattopadhyay P, Gupta RB |
3540 - 3546 |
Smart polymeric coatings for surface decontamination Gray HN, Jorgensen B, McClaugherty DL, Kippenberger A |
3547 - 3556 |
A study of Zn-Ti-based H2S removal sorbents promoted with cobalt oxides Jun HK, Lee TJ, Ryu SO, Kim JC |
3557 - 3562 |
Binding properties of a water-soluble chelating polymer with divalent metal ions measured by ultrafiltration. Poly(acrylic acid) Tomida T, Hamaguchi K, Tunashima S, Katoh M, Masuda S |
3563 - 3569 |
Adsorptive properties of fish scales of Oreochromis Niloticus (Mojarra Tilapia) for metallic ion removal from waste water Villanueva-Espinosa JF, Hernandez-Esparza M, Ruiz-Trevino FA |
3570 - 3578 |
Calcium sulfate precipitation in the presence of nondominant calcium carbonate: Thermodynamics and kinetics Sheikholeslami R, Ng M |
3579 - 3584 |
pH and level controller for a pH neutralization process Loh AP, De DS, Krishnaswamy PR |
3585 - 3604 |
Design of multi-echelon supply chain networks under demand uncertainty Tsiakis P, Shah N, Pantelides CC |
3605 - 3611 |
Effect of derivative algorithm and tuning selection on the PID control of dead-time processes Luyben WL |
3612 - 3622 |
Fault diagnosis of single-variate systems using a wavelet-based pattern recognition technique Akbaryan F, Bishnoi PR |
3623 - 3633 |
Effect of design and kinetic parameters on the control of cooled tubular reactor systems Luyben WL |
3634 - 3638 |
TGA study on humidified activation and desulfurization performance of high-CaO coal ash at low temperature Yu J, Zhang MC, Chen ML, Song YB, Fan WD, Zhou YG |
3639 - 3646 |
The effect of the liquid-phase activity model on the simulation ethyl acetate production by reactive distillation Okur H, Bayramoglu M |
3647 - 3658 |
Air separation by a small-scale two-bed medical O-2 pressure swing adsorption Jee JG, Lee JS, Lee CH |
3659 - 3663 |
Removal of trace heavy metals from a natural medicine material by supercritical CO2 chelating extraction Cui HY, Wang T, Shen ZY |
3664 - 3669 |
A fast method to check steady-state input multiplicities in vapor-liquid flash separation Monroy-Loperena R |
3670 - 3674 |
Supercritical water oxidation of olive oil mill wastewater Rivas FJ, Gimeno O, Portela JR, de la Ossa EM, Beltran FJ |
3675 - 3688 |
Pressure drop studies in bubble columns Thorat BN, Kataria K, Kulkarni AV, Joshi JB |
3689 - 3696 |
Gas discharge patterns in a large jetting fluidized bed with a vertical nozzle Guo QJ, Yue GX, Liu ZY |
3697 - 3702 |
An analytical solution for the analysis of zero-length-column experiments with heat effects Silva JAC, Da Silva FA, Rodrigues AE |
3703 - 3710 |
Prediction of gas solubilities in aqueous electrolyte systems using the predictive Soave-Redlich-Kwong model Li JD, Topphoff M, Fischer K, Gmehling J |
3711 - 3716 |
Determination of binary diffusion coefficients of anisole, 2,4-dimethylphenol, and nitrobenzene in supercritical carbon dioxide Gonzalez LM, Bueno JL, Medina I |
3717 - 3720 |
Rapid sample injection in semibatch hydrothermal treatment of solid wastes Kang KY, Quitain AT, Urano S, Daimon H, Fujie K |