화학공학소재연구정보센터

Fuel

Fuel, Vol.108 Entire volume, number list
ISSN: 0016-2361 (Print) 

In this Issue (99 articles)

1 - 12 Study on the fate of metal elements from biomass in a bench-scale fluidized bed gasifier
Cui H, Turn SQ, Keffer V, Evans D, Tran T, Foley M
13 - 18 Characterization of a regenerable sorbent for high temperature elemental mercury capture from flue gas
Scala F, Anacleria C, Cimino S
19 - 23 Next generation of ceramic hot gas filter with safety fuses integrated in venturi ejectors
Heidenreich S, Haag W, Salinger M
24 - 30 Hot gas filters for coal-based power generation systems: Operating experiences
Lupion M, Navarrete B, Alonso-Farinas B, Rodriguez-Galan M
31 - 36 Laboratory investigations on chemical hot gas cleaning of inorganic trace elements for the "UNIQUE'' process
Stemmler M, Tamburro A, Muller M
37 - 41 Integration of hot gas cleaning at temperatures above the ash melting point in IGCC
Muller M
42 - 53 Design and performance evaluation of dry cleaning process for syngas
Sharma SD, McLennan K, Dolan M, Nguyen T, Chase D
54 - 59 Chemical-mechanical bromination of biomass ash for mercury removal from flue gases
Bisson TM, Xu ZH, Gupta R, Maham Y, Liu Y, Yang HQ, Clark I, Patel M
60 - 66 Measurement of PM2.5 and ultra-fine particulate emissions from coal-fired utility boilers
Lee SW, Herage T, Dureau R, Young B
67 - 72 Emissions of particles and trace elements from coal gasification
Yoshiie R, Taya Y, Ichiyanagi T, Ueki Y, Naruse I
73 - 79 Experimental study of fine particles removal in the desulfurated scrubbed flue gas
Bao JJ, Yang LJ, Yan JP, Xiong GL, Lu B, Xin CY
80 - 84 Desulfurization behavior of zinc oxide based sorbent modified by the combination of Al2O3 and K2CO3
Ju SG, Zhao YS, Fan HL, Liang LT, Shen F, Miao MQ
85 - 90 Gas cleaning challenges for coal-fired oxy-fuel technology with carbon capture and storage
Wall T, Stanger R, Liu YH
91 - 98 Sulfur removal property of activated-char-supported Fe-Mo sorbents for integrated cleaning of hot coal gases
Yu JL, Yin FK, Wang SY, Chang LP, Gupta S
99 - 111 High temperature gas filtration with ceramic candles and ashes characterisation during steam-oxygen blown gasification of biomass
Simeone E, Siedlecki M, Nacken M, Heidenreich S, de Jong W
112 - 130 A review of research progress on CO2 capture, storage, and utilization in Chinese Academy of Sciences
Li L, Zhao N, Wei W, Sun YH
131 - 136 Laboratory scale studies of Pd/gamma-Al2O3 sorbents for the removal of trace contaminants from coal-derived fuel gas at elevated temperatures
Rupp EC, Granite EJ, Stanko DC
137 - 142 CH4 and CO2 sorption isotherms and kinetics for different size fractions of two coals
Han FS, Busch A, Krooss BM, Liu ZY, Yang JL
143 - 148 Selective oxidation of hydrogen sulfide to sulfur over activated carbon-supported metal oxides
Fang HB, Zhao JT, Fang YT, Huang JJ, Wang Y
149 - 158 Carbon supported vanadia for multi-pollutants removal from flue gas
Liu QY, Liu ZY
159 - 165 Optimization of digested chicken manure filtrate supplementation for lipid overproduction in heterotrophic culture Chlorella protothecoides
Liang GB, Mo YW, Zhou QF
166 - 176 Experimental and modeling study of chemical-kinetics mechanisms for H-2-NH3-air mixtures in laminar premixed jet flames
Kumar P, Meyer TR
177 - 183 Impinging flame ignition and propagation visualisation using Schlieren and colour-enhanced stereo imaging techniques
Wang Q, Huang HW, Zhang Y, Zhao CY
184 - 189 Adsorptive desulfurization of diesel by regenerable nickel based adsorbents
Dasgupta S, Gupta P, Aarti, Nanoti A, Goswami AN, Garg MO, Tangstad E, Vistad OB, Karlsson A, Stocker M
190 - 196 Modelling spontaneous ignition of wood, char and RDF in a lab-scale packed bed
van Blijderveen M, Bramer EA, Brem G
197 - 207 Some advantages and challenges of running a Euro IV, V6 diesel engine on a gasoline fuel
Kalghatgi GT, Gurubaran RK, Davenport A, Harrison AJ, Hardalupas Y, Taylor AMKP
208 - 215 Evaluation of gasoline-ethanol-water ternary mixtures used as a fuel for an Otto engine
Kyriakides A, Dimas V, Lymperopoulou E, Karonis D, Lois E
216 - 230 A comparative study of straw, perennial grasses and hardwoods in terms of fast pyrolysis products
Greenhalf CE, Nowakowski DJ, Harms AB, Titiloye JO, Bridgwater AV
231 - 237 A combination effect of reburn, post-flame air and acoustic excitation on NOx reduction
Hassan MI, Wu TW, Saito K
238 - 246 NO formation tendency characterization for solid fuels in fluidized beds
Konttinen J, Kallio S, Hupa M, Winter F
247 - 253 Development of a WD-XRF analysis method of minor and trace elements in liquid petroleum products
Gazulla MF, Orduna M, Vicente S, Rodrigo M
254 - 260 A study on mass transfer-reaction kinetics of NO absorption by using UV/H2O2/NaOH process
Liu YX, Pan JF, Tang AK, Wang Q
261 - 268 The dominant mechanism of enhanced heavy oil recovery by chemical flooding in a two-dimensional physical model
Zhou XD, Dong MZ, Maini B
269 - 276 Liquid-liquid and vapor-liquid equilibrium data for biodiesel reaction-separation systems
da Silva DIS, Mafra MR, da Silva FR, Ndiaye PM, Ramos LP, Cardozo L, Corazza ML
277 - 281 Kinetics of soybean oil hydrolysis in subcritical water
Milliren AL, Wissinger JC, Gottumukala V, Schall CA
282 - 291 Upgrading of associated petroleum gas into methane-rich gas for power plant feeding applications. Technological and economic benefits
Zyryanova MM, Snytnikov PV, Amosov YI, Belyaev VD, Kireenkov VV, Kuzin NA, Vernikovskaya MV, Kirillov VA, Sobyanin VA
292 - 302 Petrophysical characterization of Chinese coal cores with heat treatment by nuclear magnetic resonance
Cai YD, Liu DM, Pan ZJ, Yao YB, Li JQ, Qiu YK
303 - 310 Classification performance evaluation of floatex density separator for coal fines
Kumar CR, Bhoja SK, Tripathy SK, Mohanan S, Venugopalan T, Suresh N
311 - 318 Co-pyrolysis of palm shell and polystyrene waste mixtures to synthesis liquid fuel
Abnisa F, Daud WMAW, Ramalingam S, Azemi MNB, Sahu JN
319 - 333 Synergetic effects of mixed copper-iron oxides oxygen carriers in chemical looping combustion
Siriwardane R, Tian HJ, Simonyi T, Poston J
334 - 340 Experimental study on the performance of recooling cycle of hydrocarbon fueled scramjet engine
Qin J, Zhang SL, Bao W, Jia ZJ, Yu B, Zhou WX
341 - 350 The influence of temperature and steam on the yields of tar and light hydrocarbon compounds during devolatilization of dried sewage sludge in a fluidized bed
Fuentes-Cano D, Gomez-Barea A, Nilsson S, Ollero P
351 - 355 Introduction of a novel fluorescence based method for the composition estimation of petroleum fuel-biofuel blends
Prakash J, Mishra AK
356 - 369 Thermodynamic modelling and evaluation of a two-stage thermal process for waste gasification
Materazzi M, Lettieri P, Mazzei L, Taylor R, Chapman C
370 - 384 Coal direct chemical looping combustion process: Design and operation of a 25-kW(th) sub-pilot unit
Kim HR, Wang DW, Zeng L, Bayham S, Tong A, Chung E, Kathe MV, Luo SW, McGiveron O, Wang AN, Sun ZC, Chen D, Fan LS
385 - 390 Thermal dissolution of Shenfu coal in different solvents
Shui HF, Zhou Y, Li HP, Wang ZC, Lei ZP, Ren SB, Pan CX, Wang WW
391 - 399 Viscoelastic properties and constitutive modelling of bitumen
Behzadfar E, Hatzikiriakos SG
400 - 408 Effects of temperature on the yields and properties of bio-oil from the fast pyrolysis of mallee bark
Mourant D, Lievens C, Gunawan R, Wang Y, Hu X, Wu LP, Syed-Hassan SSA, Li CZ
409 - 416 An advanced biomass gasification technology with integrated catalytic hot gas cleaning Part I. Technology and initial experimental results in a lab-scale facility
Dong L, Asadullah M, Zhang S, Wang XS, Wu HW, Li CZ
417 - 429 Revisiting the PC-SAFT characterization procedure for an improved asphaltene precipitation prediction
Punnapala S, Vargas FM
430 - 438 Effect of catalytic site position: Nickel nanocatalyst selectively loaded inside or outside carbon nanotubes for methane dry reforming
Ma QX, Wang D, Wu MB, Zhao TS, Yoneyama Y, Tsubaki N
439 - 444 - Formation of coke during the pyrolysis of bio-oil
Wang Y, Mourant D, Hu X, Zhang S, Lievens C, Li CZ
445 - 450 Experimental study on chemical recuperation process of endothermic hydrocarbon fuel
Qin J, Zhang SL, Bao W, Yu WL, Yu B, Zhou WX, Yu DR
451 - 464 A study on catalytic pyrolysis of biomass with Y-zeolite based FCC catalyst using response surface methodology
Mante OD, Agblevor FA, McClung R
465 - 473 The use of La1-xSrxFeO3 perovskite-type oxides as oxygen carriers in chemical-looping reforming of methane
He F, Li XN, Zhao K, Huang Z, Wei GQ, Li HB
474 - 483 Oxy-fuel combustion effects on trace metals behaviour by equilibrium calculations
Contreras ML, Garcia-Frutos FJ, Bahillo A
484 - 489 A method to target and correct sources of unburned carbon in coal-fired utility boilers
Gao H, Majeski AJ, Runstedtler A
490 - 501 Catalytic conversion of benzothiophene over a H-ZSM5 based catalyst
Al-Bogami SA, de Lasa HI
502 - 514 A new screening tool for evaluation of steamflooding performance in Naturally Fractured Carbonate Reservoirs
Shafiei A, Dusseault MB, Zendehboudi S, Chatzis I
515 - 520 Mesoporous SAPO-34 with amine-grafting for CO2 capture
Kim JY, Kim J, Yang ST, Ahn WS
521 - 533 Nickel-base superalloys for ultra-supercritical coal-fired power plants: Fireside corrosion. Laboratory studies and power plant exposures
Stein-Brzozowska G, Florez DM, Maier J, Scheffknecht G
534 - 542 Performance improvement of dual fluidized bed gasifiers by temperature reduction: The behavior of tar species in the product gas
Kirnbauer F, Wilk V, Hofbauer H
543 - 549 Analytical model for zeta potential of asphaltene
Das S, Thundat T, Mitra SK
550 - 556 Predicting the slagging potential of co-fired coal with sewage sludge and wood biomass
Degereji MU, Gubba SR, Ingham DB, Ma L, Pourkashanian M, Williams A, Williamson J
557 - 564 Methane and ethylene time-history measurements in n-butane and n-heptane pyrolysis behind reflected shock waves
Pyun SH, Ren W, Davidson DF, Hanson RK
565 - 577 Application of a validated gasification model to determine the impact of coal particle grinding size on carbon conversion
Kumar M, Ghoniem AF
578 - 585 Technical evaluation of a power generation process consuming municipal solid waste
de Souza-Santos ML, Ceribeli K
586 - 596 Fly ash deposition modelling: Requirements for accurate predictions of particle impaction on tubes using RANS-based computational fluid dynamics
Weber R, Schaffel-Mancini N, Mancini M, Kupka T
597 - 603 Improved Fischer-Tropsch synthesis for gasoline over Ru, Ni promoted Co/HZSM-5 catalysts
Wang SR, Yin QQ, Guo JF, Ru B, Zhu LJ
604 - 611 Esterification of oleic acid using 12-tungstophosphoric supported in flint kaolin of the Amazonia
Lacerda OD, Cavalcanti RM, de Matos TM, Angelica RS, da Rocha GN, Barros IDL
612 - 619 Free fatty acids esterification of waste cooking oil and its mixtures with rapeseed oil and diesel
Boffito DC, Pirola C, Galli F, Di Michele A, Bianchi CL
620 - 628 Water-gas shift modeling in coal gasification in an entrained-flow gasifier - Part 2: Gasification application
Lu XJ, Wang T
629 - 638 Water-gas shift modeling in coal gasification in an entrained-flow gasifier. Part 1: Development of methodology and model calibration
Lu XJ, Wang T
639 - 646 Kinetic and thermodynamic studies on the thermal behaviour of fly ash from lignite coals
Boycheva S, Zgureva D, Vassilev V
647 - 655 Monitoring the liquid/liquid extraction of naphthenic acids in brazilian crude oil using electrospray ionization FT-ICR mass spectrometry (ESI FT-ICR MS)
Colati KAP, Dalmaschio GP, de Castro EVR, Gomes AO, Vaz BG, Romao W
656 - 667 Dynamic Elemental Thermal Analysis (DETA) - A characterisation technique for the production of biochar and bio-oil from biomass resources
Stanger R, Wall T, Lucas J, Mahoney M
668 - 674 Combustion and emission characteristics of a HCCI engine fuelled with n-butanol-gasoline blends
He BQ, Liu MB, Yuan J, Zhao H
675 - 681 Prediction of minimum miscibility pressure in oil reservoirs using a modified SAFT equation of state
Fazlali A, Nikookar M, Agha-Aminiha A, Mohammadi AH
682 - 690 The effect of supercritical water on coal pyrolysis and hydrogen production: A combined ReaxFF and DFT study
Zhang JL, Weng XX, Han Y, Li W, Cheng JY, Gan ZX, Gu JJ
691 - 698 DNS analysis of a three-dimensional supersonic turbulent lifted jet flame
Luo K, Jin T, Lu SQ, Fan JR
699 - 708 Investigation on the behaviour of a DI diesel engine fueled with Jatropha Methyl Ester (JME) and Tyre Pyrolysis Oil (TPO) blends
Sharma A, Murugan S
709 - 714 Comparison of glycerol ketals, glycerol acetates and branched alcohol-derived fatty esters as cold-flow improvers for palm biodiesel
Giraldo SY, Rios LA, Suarez N
715 - 722 Removal of naphthenic acids from crude oil using amino acid ionic liquids
Anderson K, Goodrich P, Hardacre C, Hussain A, Rooney DW, Wassell D
723 - 730 Factors influencing the characterization of bubbles produced by coaxial gas-particle jet flow
Lu H, Liu HF, Li WF, Xu JL
731 - 739 Autothermal reforming of synthetic JP-8 derived from a coal syngas stream
Scenna R, DuBois TG, Nieh S
740 - 748 Oxidative dehydrogenation of ethylbenzene with CO2 for styrene production over porous iron-based catalysts
Castro AJR, Soares JM, Filho JM, Oliveira AC, Campos A, Milet ERC
749 - 757 Synergistic kinetic inhibition of natural gas hydrate formation
Daraboina N, Malmos C, von Solms N
758 - 770 Air assisted atomization and spray density characterization of ethanol and a range of biodiesels
Kourmatzis A, Pham PX, Masri AR
771 - 779 Long term storage of biodiesel/petrol diesel blends in polyethylene fuel tanks
Thompson MR, Mu B, Ewaschuk CM, Cai Y, Oxby KJ, Vlachopoulos J
780 - 792 Numerical simulation of thermal and reaction waves for in situ combustion in hydrocarbon reservoirs
Youtsos MSK, Mastorakos E
793 - 796 Effect of fractional winterization of beef tallow biodiesel on the cold flow properties and viscosity
Dogan TH, Temur H
797 - 811 The Research and Motor octane numbers of Liquefied Petroleum Gas (LPG)
Morganti KJ, Foong TM, Brear MJ, da Silva G, Yang Y, Dryer FL
812 - 823 The gasification reactivity of high-heating-rate chars in single and mixed atmospheres of H2O and CO2
Guizani C, Sanz FJE, Salvador S
824 - 832 The spherically symmetric droplet burning characteristics of Jet-A and biofuels derived from camelina and tallow
Liu YC, Savas AJ, Avedisian CT
833 - 839 Alkali activated materials based on fluid catalytic cracking catalyst residue (FCC): Influence of SiO2/Na2O and H2O/FCC ratio on mechanical strength and microstructure
Tashima MM, Akasaki JL, Melges JLP, Soriano L, Monzo J, Paya J, Borrachero MV
840 - 845 Measurement and prediction of speeds of sound of fatty acid ethyl esters and ethylic biodiesels
Freitas SVD, Santos A, Moita MLCJ, Follegatti-Romero LA, Dias TPVB, Meirelles AJA, Daridon JL, Lima AS, Coutinho JAP
846 - 849 Visible light photoactivity of sulfur and phosphorus doped nanoporous carbons in oxidation of dibenzothiophenes
Seredych M, Bandosz TJ
850 - 854 A novel PdAg/TiO2 nanotube electrocatalyst for methanol electro-oxidation
Ju JF, Chen X, Shi YJ, Wu DH
855 - 858 Characterization and production of Ceiba pentandra biodiesel and its blends
Silitonga AS, Ong HC, Mahlia TMI, Masjuki HH, Chong WT