화학공학소재연구정보센터

Energy and Buildings

Energy and Buildings, Vol.158 Entire volume, number list
ISSN: 0378-7788 (Print) 

In this Issue (153 articles)

1 - 13 Indoor daylight distribution in a room with integrated dynamic solar concentrating facade
Zhu L, Shao ZB, Sun Y, Soebarto V, Gao F, Zillante G, Zuo J
14 - 22 Hygro-thermal properties of silica aerogel blankets dried using microwave heating for building thermal insulation
Nocentini K, Achard P, Biwole P
23 - 31 Performance study on different location of double layers SSPCM wallboard in office building
Zhu N, Wu MD, Hu PF, Xu LH, Lei F, Li SS
32 - 36 Appliance classification using VI trajectories and convolutional neural networks
De Baets L, Ruyssinck J, Develder C, Dhaene T, Deschrijver D
37 - 42 Solvent-free preparation and performance of novel xylitol based solid-solid phase change materials for thermal energy storage
Yang YY, Kong WB, Cai XF
43 - 53 Potential energy savings from high-resolution sensor controls for LED lighting
Dikel EE, Newsham GR, Xue H, Valdes JJ
54 - 61 A retrospective on the impact of Annex 40 and Annex 47 research on the international state of building commissioning
Ferretti NM, Miyata M, Baumann O
62 - 76 A dynamic energy performance-driven approach for assessment of buildings energy Renovation-Danish case studies
Jradi M, Veje CT, Jorgensen BN
77 - 85 Impact of paper and wooden collections on humidity stability and energy consumption in museums and libraries
Kupczak A, Sadlowska-Salega A, Krzemien L, Sobczyk J, Radon J, Kozlowski R
86 - 94 Development of a CO2 emission benchmark for achieving the national CO2 emission reduction target by 2030
Jeong K, Hong T, Kim J
95 - 122 PCM-mortar based construction materials for energy efficient buildings: A review on research trends
Rao VV, Parameshwaran R, Ram VV
123 - 134 IEA EBC annex 63-implementation of energy strategies in communities
Strasser H, Kimman J, Koch A, Tinkhof OMA, Muller D, Schiefelbein J, Slotterback C
135 - 146 Insulation panels for active control of heat transfer in walls operated as space heating or as a thermal barrier: Numerical simulations and experiments
Simko M, Krajcik M, Sikula O, Simko P, Kalus D
147 - 149 IEA EBC annexes advance technologies and strategies to reduce energy use and GHG emissions in buildings and communities
Hong TZ
150 - 161 Experimental study and analysis of heat and mass transfer ability of counter-flow packing tower and liquid desiccant dehumidification system
Zhang L, Liu XH, Wei HY, Zhang XS
162 - 171 Assessment of single-family house thermal renovation based on comprehensive on-site diagnostics
Hurnik M, Specjal A, Popiolek Z, Kierat W
172 - 180 Optimizing of near infrared region reflectance of mix-waste tile aggregate as coating material for cool pavement with surface temperature measurement
Anting N, Din MFM, Iwao K, Ponraj M, Siang AJLM, Yong LY, Prasetijo J
181 - 193 Urban form and household electricity consumption: A multilevel study
Li CS, Song Y, Kaza N
194 - 208 Heat transfer measurements of a linear thermal bridge in a wooden building corner
Prata J, Simoes N, Tadeu A
209 - 221 Experimental evaluation of thermal comfort, ventilation performance indices and exposure to airborne contaminant in an airborne infection isolation room equipped with a displacement air distribution system
Berlanga FA, de Adana MR, Olmedo I, Villafruela JM, San Jose JF, Castro F
222 - 233 Lowest thermal transmittance of an external wall under budget, material and thickness restrictions: An integer linear programming approach
Soler D, Salandin A, Mico JC
234 - 243 Sample data selection method for improving the prediction accuracy of the heating energy consumption
Yuan TH, Zhu N, Shi YF, Chang C, Yang K, Ding Y
244 - 260 An urban building database (UBD) supporting a smart city information system
Monteiro CS, Costa C, Pina A, Santos MY, Ferrao P
261 - 267 Analysis of energy impacts of facade-inclusive retrofit strategies, compared to system-only retrofits using regression models
Martinez A, Choi JH
268 - 281 Short term predictions of occupancy in commercial buildings-Performance analysis for stochastic models and machine learning approaches
Li ZX, Dong B
282 - 289 Performance analysis of vapour compression water chiller with magnetic flux at the condenser exit
Tipole P, Karthikeyan A, Bhojwani V, Deshmukh S, Tipole B, Shinde K, Sundare A, Shendage D, Faisal W, Vikhe A
290 - 299 Heat stress-resistant building design in the Australian context
Hatvani-Kovacs G, Belusko M, Pockett J, Boland J
300 - 309 Study on convective heat transfer coefficient on vertical external surface of island-reef building based on naphthalene sublimation method
Xie JC, Cui YP, Liu JP, Wang JP, Zhang H
310 - 325 Describing the dynamics, distributions, and multiscale relationships in the time evolution of residential building energy consumption
Knowles HS, Hostetler ME, Liebovitch LS
326 - 341 Generating proper building envelopes for photovoltaics integration with shape grammar theory
Youssef AMA, Zhai ZQ, Reffat RM
342 - 355 Hybrid air-hydronic HVAC performance in a residential net-zero energy retrofit
Caskey SL, Groll EA
356 - 370 Evaluation of a cost-responsive supply air temperature reset strategy in an office building
Raftery P, Li SY, Jin BH, Ting M, Paliaga G, Cheng HK
371 - 383 Piezoelectric energy harvesting from vortex shedding and galloping induced vibrations inside HVAC ducts
Petrini F, Gkoumas K
384 - 392 Numerical investigation on optimal number of longitudinal fins in horizontal annular phase change unit at different wall temperatures
Cao XL, Yuan YP, Xiang B, Sun LL, Zhang XX
393 - 405 A modified method of evaluating the impact of air humidity on human acceptable air temperatures in hot-humid environments
Li BZ, Du CQ, Tan ML, Liu H, Essah E, Yao RM
406 - 416 A calibration methodology for building dynamic models based on data collected through survey and billings
Allesina G, Mussatti E, Ferrari F, Muscio A
417 - 428 Energy performance of GCC-specification LCC optimized dedicated outdoor air system configurations coupled to an air-cooled outdoor unit
Ali MT, Sarfraz O, Armstrong PR
431 - 452 The energy and indoor environmental performance of Egyptian offices: Parameter analysis and future policy
Elharidi AM, Tuohy PG, Teamah MA
453 - 465 A review of building climate and plant controls, and a survey of industry perspectives
Royapoor M, Antony A, Roskilly T
466 - 475 Thermal and ventilation performance of combined passive chilled beam and displacement ventilation systems
Shan WY, Rim DH
476 - 485 Mapping failures in energy and environmental performance of buildings
Borgstein EH, Lamberts R, Hensen JLM
486 - 493 Consumer behaviour in the residential heating sector in Austria: Findings from a bottom-up modelling approach
Holzmann A, Schmid E
494 - 508 Parametric analysis of a cross-flow membrane-based parallel-plate liquid desiccant dehumidification system: Numerical and experimental data
Bai HY, Zhu J, Chen ZW, Chu JZ
509 - 524 Year-round performance assessment of a ground source heat pump with multiple energy piles
Cui YL, Zhu J
525 - 535 A numerical airflow pattern study of a floor swirl diffuser for UFAD system
Yau YH, Poh KS, Badarudin A
536 - 548 Analysis of the energy efficiency potential of household lighting in Switzerland using a stock model
Heidari M, Majcen D, van der Lans N, Floret I, Patel MK
549 - 557 'We like to live in the weather': Cooling practices in naturally ventilated dwellings in Darwin, Australia
Daniel L
558 - 568 Inherent operational characteristics aided fuzzy logic controller for a variable speed direct expansion air conditioning system for simultaneous indoor air temperature and humidity control
Yan HX, Xia YD, Xu XG, Deng SM
569 - 579 Experimental thermal evaluation of building roofs with conventional and reflective coatings
Hernandez-Perez I, Xaman J, Macias-Melo EV, Aguilar-Castro KM, Zavala-Guillen I, Hernandez-Lopez I, Sima E
580 - 594 The effect of heat and moisture coupling migration of ground structure without damp-proof course on the indoor floor surface temperature and humidity: Experimental study
Wang YY, Jiang C, Liu YF, Wang DJ, Liu JP
595 - 604 Abatement cost of embodied emissions of a residential building in Sweden
Andersson M, Barkander J, Kono J, Ostermeyer Y
605 - 615 On the assessment of urban heat island phenomenon and its effects on building energy performance: A case study of Rome (Italy)
Guattari C, Evangelisti L, Balaras CA
616 - 628 A review of Net Zero Energy Buildings with reflections on the Australian context
Wells L, Rismanchi B, Aye L
629 - 646 A GIS tool for the calculation of solar irradiation on buildings at the urban scale, based on Italian standards
Pili S, Desogus G, Melis D
647 - 655 The suitability of machine learning to minimise uncertainty in the measurement and verification of energy savings
Gallagher CV, Bruton K, Leahy K, O'Sullivan DTJ
656 - 667 An energy model of high-rise apartment buildings integrating variation in energy consumption between individual units
Jang H, Kang J
668 - 676 A machine learning bayesian network for refrigerant charge faults of variable refrigerant flow air conditioning system
Hu M, Chen HX, Shen LM, Li GN, Guo YB, Li HR, Li J, Hu WJ
677 - 683 On the distortion of thermal flux and of surface temperature induced by heat flux sensors positioned on the inner surface of buildings
Cucumo M, Ferraro V, Kaliakatsos D, Mele M
684 - 697 Optimal configuration of multiple-chiller plants under cooling load uncertainty for different climate effects and building types
Huang P, Huang GS, Augenbroe G, Li S
698 - 711 Hygrothermal characteristics of aerogel-enhanced insulating materials under different humidity and temperature conditions
Nosrati RH, Berardi U
712 - 720 A Study on verification of changes in performance of a water-cooled VRF system with control change based on measuring data
Lee JH, Kim H, Song YH
721 - 735 Development of multifunctional plaster using nano-TiO2 and distinct particle size cellulose fibers
Senff L, Ascensao G, Ferreira VM, Seabra MP, Labrincha JA
736 - 749 Techno-economical Analysis based on a Parametric Computational Evaluation for decision process on envelope technologies and configurations
Tagliabue LC, Di Giuda GM, Villa V, De Angelis E, Ciribini ALC
750 - 760 Investigating cost-optimal refurbishment strategies for the medieval district of Visby in Sweden
Liu L, Rohdin P, Moshfegh B
761 - 775 Integrated analysis model for assessing CO2 emissions, seismic performance, and costs of buildings through performance-based optimal seismic design with sustainability
Park HS, Hwang JW, Oh BK
776 - 793 Review on building energy performance improvement using phase change materials
Song MJ, Niu FX, Mao N, Hu YX, Deng SM
794 - 800 Experimental investigation of optical and thermal performance of a PCM-glazed unit for building applications
Liu CY, Wu YY, Zhu YJ, Li D, Ma LY
801 - 811 Experimental investigation of double-pipe heat exchangers in air conditioning applications
Ghani S, Gamaledin SMA, Rashwan MM, Atieh MA
812 - 821 An experimental study on a novel radiant-convective heating system based on air source heat pump
Dong JK, Zhang L, Deng SM, Yang B, Huang S
822 - 830 Influences of perceived control on thermal comfort and energy use in buildings
Yun GY
831 - 847 Development of load models and operation simulator for a building complex with mixtures of multi-type engines and renewable devices
Liu J, Chung DH, Chung M, Im YH
848 - 860 Influencing energy and water use within a home system of practice
Eon C, Liu X, Morrison GM, Byrne J
861 - 872 Operational performance study on a photovoltaic loop heat pipe/solar assisted heat pump water heating system
Li H, Sun Y
873 - 883 Analysis of application of the M-Cycle heat and mass exchanger to the typical air conditioning systems in Poland
Pandelidis D, Anisimov S, Drag P, Sidorczyk M, Pacak A
884 - 896 Model calibration of a variable refrigerant flow system with a dedicated outdoor air system: A case study
Kim D, Cox SJ, Cho H, Im P
897 - 905 Assessing energy use and overheating risk in net zero energy dwellings in UK
Gupta R, Gregg M
906 - 923 Improving the energy sustainability of a Swiss village through building renovation and renewable energy integration
Le Guen M, Mosca L, Perera ATD, Coccolo S, Mohajeri N, Scartezzini JL
924 - 938 WinLight: A WiFi-based occupancy-driven lighting control system for smart building
Zou H, Zhou YX, Jiang H, Chien SC, Xie LH, Spanos CJ
939 - 949 Effect of acoustical clouds coverage and air movement on radiant chilled ceiling cooling capacity
Karmann C, Bauman F, Raftery P, Schiavon S, Koupriyanov M
950 - 963 An advanced simulation test bed for the stability analysis of variable air volume air-conditioning control system. Part 1: Optimal simplified model of building envelope for room thermal performance prediction
Yi ZM, Yu H, Wei Q, Chu XY
964 - 970 Innovative thermo-solar air heater
Cuzminschi M, Gherasim R, Girleanu V, Zubarev A, Stamatin I
971 - 986 Experimental performance study of ground-coupled heat pump system for cooling and heating provision in karst region
Zeng ZT, Zhao YL, Lu HB, Wei CF
987 - 999 Relationship between pressure drop and face velocity for electrospun nanofiber filters
Xia TL, Bian Y, Zhang L, Chen C
1000 - 1012 Influence of coating soil types on the energy of earth-air heat exchanger
Cuny M, Lin J, Siroux M, Magnenet V, Fond C
1013 - 1022 An autonomous shading system based on coupled wood bilayer elements
Vailati C, Bachtiar E, Hass P, Burgert I, Ruggeberg M
1023 - 1035 Energy performance analysis of an office building in three climate zones
Jung N, Paiho S, Shemeikka J, Lahdelma R, Airaksinen M
1036 - 1048 Thermal performance analysis of residential attics containing high performance aerogel-based radiant barriers
Kosny J, Fontanini AD, Shukla N, Fallahi A, Watts A, Trifu R, Ganapathysubramanian B
1049 - 1062 Honeycomb-like structured biological porous carbon encapsulating PEG: A shape-stable phase change material with enhanced thermal conductivity for thermal energy storage
Zhao YJ, Min X, Huang ZH, Liu YG, Wu XW, Fang MH
1063 - 1078 Real-time human skin temperature analysis using thermal image recognition for thermal comfort assessment
Metzmacher H, Wolki D, Schmidt C, Frisch J, van Treeck C
1079 - 1086 Thermal modeling and investigation of the most energy-efficient window position
Misiopecki C, Bouquin M, Gustavsen A, Jelle BP
1087 - 1096 Dynamic life cycle assessment integrating value choice and temporal factors-A case study of an elementary school
Hu M
1097 - 1105 Thermal stress reduction in cool roof membranes using phase change materials (PCM)
Saffari M, Piselli C, de Gracia A, Pisello AL, Cotana F, Cabeza LF
1106 - 1116 Heating chair assisted by leg-warmer: A potential way to achieve better thermal comfort and greater energy conservation in winter
He YD, Wang X, Li NP, He ML, He D
1117 - 1129 Thermal performance enhancement of eco-friendly bricks incorporating agro-wastes
Kazmi SMS, Munir MJ, Patnaikuni I, Wu YF, Fawad U
1130 - 1138 In search of the principles of resilient urban design: Implementability of the principles in the case of the cities in Serbia
Lazarevic EV, Kekovic Z, Antonic B
1139 - 1151 A novel feature selection framework with Hybrid Feature-Scaled Extreme Learning Machine (HFS-ELM) for indoor occupancy estimation
Masood MK, Jiang CY, Soh YC
1152 - 1160 New perspectives in solid desiccant cooling for hot and humid regions
Fong KF, Lee CK
1161 - 1169 Field test and simulation evaluation of variable refrigerant flow systems performance
Lee JH, Im P, Song YH
1170 - 1183 Assessment of gender on requirements for thermal comfort in office buildings located in the Brazilian humid subtropical climate
Maykot JK, Rupp RF, Ghisi E
1184 - 1188 Phase change materials of paraffin in h-BN porous scaffolds with enhanced thermal conductivity and form stability
Qian ZC, Shen H, Fang X, Fan LW, Zhao N, Xu J
1189 - 1205 An integrated BIM-based framework for the optimization of the trade-off between embodied and operational energy
Shadram F, Mukkavaara J
1206 - 1225 Optimal sensor placement strategy for office buildings using clustering algorithms
Yoganathan D, Kondepudi S, Kalluri B, Manthapuri S
1226 - 1240 Valuation of energy efficient certificates in buildings
Zhang LM, Li Y, Stephenson R, Ashuri B
1241 - 1256 A novel truncated cone helix energy pile: Modelling and investigations of thermal performance
Huang GQ, Yang XF, Liu YJ, Zhuang CL, Zhang HY, Lu J
1257 - 1265 Performance of a thermal energy storage composite by incorporating diatomite stabilized paraffin as phase change material
Guo X, Huang YH, Cao JZ
1266 - 1274 The influence of bioclimatic urban redevelopment on outdoor thermal comfort
Karakounos I, Dimoudi A, Zoras S
1275 - 1285 Does your personality shape your reaction to your neighbours' behaviour? A spatial study of the diffusion of solar panels
Busic-Sontic A, Fuerst F
1286 - 1295 Experimental investigation on thermal comfort model between local thermal sensation and overall thermal sensation
Fang ZS, Liu H, Li BZ, Tan ML, Olaide OM
1296 - 1305 Residential adaptive comfort in a humid subtropical climate-Sydney Australia
de Dear R, Kim J, Parkinson T
1306 - 1316 Towards adoption of building energy simulation and optimization for passive building design: A survey and a review
Tian ZC, Zhang XK, Jin X, Zhou X, Si BH, Shi X
1317 - 1327 An active control strategy for district heating networks and the effect of different thermal energy storage configurations
Vanhoudt D, Claessens BJ, Salenbien R, Desmedt J
1328 - 1336 Combination of terahertz radiation method and thermal probe method for non-destructive thermal diagnosis of thick building walls
Yang YY, Wu TV, Sempey A, Pradere C, Sommier A, Batsale JC
1337 - 1345 Mode and storage load based control of a complex building system with a geothermal field
Bode G, Futterer J, Muller D
1346 - 1357 Start-up behaviour of a combined air-conditioning system in cooling and heating operating modes
Jeong J, Lubis A, Saito K, Karng S, Kim S, Kim K
1358 - 1367 Thermal-based analysis for the automatic detection and characterization of thermal bridges in buildings
Garrido I, Laguela S, Arias P, Balado J
1368 - 1378 Enhancing the performance of a zeolite 13X/CaCl2-water adsorption cooling system by improving adsorber design and operation sequence
Chan KC, Tso CY, Wu CL, Chao CYH
1379 - 1392 Should we consider climate change for Brazilian social housing? Assessment of energy efficiency adaptation measures
Triana MA, Lamberts R, Sassi P
1393 - 1403 The potential for cool roofs to improve the energy efficiency of single storey warehouse-type retail buildings in Australia: A simulation case study
Seifhashemi M, Capra BR, Milller W, Bell J
1404 - 1416 Implementation of cooperative Fuzzy model predictive control for an energy-efficient office building
Killian M, Kozek M
1417 - 1428 Effects of convection heat transfer on Sunagoke moss green roof: A laboratory study
Amir AKM, Katoh Y, Katsurayama H, Koganei M, Mizunuma M
1429 - 1441 Prediction of wind pressure coefficients on building surfaces using artificial neural networks
Bre F, Gimenez JM, Fachinotti VD
1442 - 1449 The experimental verification on the optimal discharge pressure in a subcooler-based transcritical CO2 system for space heating
Song YL, Ye ZL, Wang YK, Cao F
1450 - 1460 The mediterranean smart adaptive wall. An experimental design of a smart and adaptive facade module for the mediterranean climate
Iommi M
1461 - 1474 Denoising autoencoders for Non-Intrusive Load Monitoring: Improvements and comparative evaluation
Bonfigli R, Felicetti A, Principi E, Fagiani M, Squartini S, Piazza F
1475 - 1486 Field study of mixed-mode office buildings in Southern Brazil using an adaptive thermal comfort framework
Rupp RF, de Dear R, Ghisi E
1487 - 1498 Analysing methodological choices in calculations of embodied energy and GHG emissions from buildings
Rasmussen FN, Malmqvist T, Moncaster A, Wiberg AH, Birgisdottir H
1499 - 1509 A statistically-based fault detection approach for environmental and energy management in buildings
Horrigan M, Turner WJN, O'Donnell J
1510 - 1522 Temperature distribution and energy consumption in impinging jet and mixing ventilation heating rooms with intermittent cold outside air invasion
Ye X, Kang YM, Yang XF, Zhong K
1523 - 1532 A field study of thermal sensation and neutrality in free-running aged-care homes in Shanghai
Wang Z, Yu H, Jiao Y, Wei Q, Chu XY
1533 - 1543 Gradient boosting machine for modeling the energy consumption of commercial buildings
Touzani S, Granderson J, Fernandes S
1544 - 1552 Insulation and mechanical properties of jute and hollow conjugated polyester reinforced nonwoven composite
Zakriya GM, Ramakrishnan G
1553 - 1563 Probabilistic analysis of mist cooler effectiveness for air-cooled chiller systems
Yu FW, Ho WT, Chan KT, Sit RKY
1564 - 1575 Profile of occupant activity impact on indoor air - method of its determination
Szczurek A, Dolega A, Maciejewska M
1576 - 1585 Improving thermal performance of an existing UK district heat network: A case for temperature optimization
Tunzi M, Boukhanouf R, Li HW, Svendsen S, Ianakiev A
1586 - 1592 Ventilated Active Thermoelectric Envelope (VATE): Analysis of its energy performance when integrated in a building
Ibanez-Puy M, Martin-Gomez C, Bermejo-Busto J, Sacristan JA, Ibanez-Puy E
1593 - 1601 Large-area seepage and heat transfer model of beach well infiltration intake system for seawater source heat pump
Xin J, Lin DM, Shu HW
1602 - 1612 Study of the energy performance of an earth-Air heat exchanger for refreshing buildings in Algeria
Menhoudj S, Mokhtari AM, Benzaama MH, Maalouf C, Lachi M, Makhlouf M
1613 - 1624 A multi-objective optimization design method in zero energy building study: A case study concerning small mass buildings in cold district of China
Wu WD, Guo JL, Li JW, Hou HY, Meng Q, Wang WD
1625 - 1631 Thermal environment investigation and analysis on thermal adaptation of workers in a rubber factory
Wang HY, Sun L, Guan HY, Hu ST
1632 - 1639 Stochastic receding horizon control minimizing mean-variance with demand forecasting for home EMSs
Yoshida A, Yoshikawa J, Fujimoto Y, Amano Y, Hayashi Y
1640 - 1647 Development of a detachable window aircap module for energy saving
Lee H, Kim S, Seo J
1648 - 1661 Evaluating the potential of hybrid ventilation for small to medium sized office buildings with different intelligent controls and uncertainties in US climates
Chen JL, Augenbroe G, Song XY
1662 - 1682 Suitability analysis of modeling and assessment approaches in energy efficiency in buildings
Koulamas C, Kalogeras AP, Pacheco-Torres R, Casillas J, Ferrarini L
1683 - 1693 Predicting water consumption from energy data: Modeling the residential energy and water nexus in the integrated urban metabolism analysis tool (IUMAT)
Mostafavi N, Gandara F, Hoque S
1694 - 1702 Effect of fly ash on the service life, carbon footprint and embodied energy of high strength concrete in the marine environment
Nath P, Sarker PK, Biswas WK
1703 - 1710 Numerical simulation and sensitivity analysis of a steel framed internal insulation system
Manzan M, De Zorzi EZ, Lorenzi W
1711 - 1723 Empirical and comparative validation of an original model to simulate the thermal behaviour of outdoor test cells
Cattarin G, Pagliano L, Causone F, Kindinis A
1724 - 1735 Developing a decision aid for selecting low-carbon refurbishment solutions for multi-story residential buildings in subtropical cities
Li J, Ng ST, Skitmore M
1736 - 1750 Experimental investigation and data-driven regression models for performance characterization of single and multiple passive chilled beam systems
Kim J, Tzempelikos A, Horton WT, Braun JE
1751 - 1761 Design and validation of a low cost indoor environment quality data logger
Carre A, Williamson T
1762 - 1769 A multi-case study of innovations in energy performance of social housing for older adults in the Netherlands
Boerenfijn P, Kazak JK, Schellen L, van Hoof J
1770 - 1780 Study on the performance of heat storage and heat release of water storage tank with PCMs
Lu SL, Zhang TS, Chen YF
1781 - 1789 Preparation and properties of capric-stearic acid/White Carbon Black composite for thermal storage in building envelope
Liu FL, Zhu JQ, Liu JH, Ma BG, Zhou WB, Li RG