Energy

Energy, Vol.179 Entire volume, number list

ISSN: 0360-5442 (Print)

In this Issue (104 articles)

1 - 11	Life cycle energy efficiency evaluation for coal development and utilization Wang N, Shen RF, Wen ZG, De Clercq D
12 - 18	Flexible heatsink based on a phase-change material for a wearable thermoelectric generator Lee G, Kim CS, Kim S, Kim YJ, Choi H, Cho BJ
19 - 29	Potential power generation on a small-scale separated-type biomass gasification system Situmorang YA, Zhao ZK, Yoshida A, Kasai Y, Abudula A, Guan GQ
30 - 45	A thermodynamic analysis and economic assessment of a modified de-carbonization coal-fired power plant incorporating a supercritical CO2 power cycle and an absorption heat transformer Xu C, Li XS, Xin TT, Liu X, Xu G, Wang M, Yang YP
46 - 58	Integrated ORC-Adsorption cycle: A first and second law analysis of potential configurations Roumpedakis TC, Christou T, Monokrousou E, Braimakis K, Karellas S
59 - 75	A diesel/natural gas dual fuel mechanism constructed to reveal combustion and emission characteristics Zhang W, Chang SY, Wu W, Dong LH, Chen ZH, Chen GS
76 - 89	Quantum computing for energy systems optimization: Challenges and opportunities Ajagekar A, You FQ
90 - 99	Influence of geometric parameter on the performance of a new asymmetrical and segmented thermoelectric generator Karana DR, Sahoo RR
100 - 110	Design optimization of vehicle EHPS system based on multi-objective genetic algorithm Cui TW, Zhao WZ, Wang CY
111 - 128	Study on the energy performance enhancement of a new PCMs integrated hybrid system with the active cooling and hybrid ventilations Zhou YK, Zheng SQ, Zhang GQ
129 - 137	Investigation on the interactions among lignocellulosic constituents and minerals of biomass and their influences on co-firing Shi KQ, Oladejo JM, Yan JF, Wu T
138 - 153	Numerical analysis of transient wellbore thermal behavior in dynamic deepwater multi-gradient drilling Yang HW, Li J, Liu GH, Wang C, Li MB, Jiang HL
154 - 162	Micro-tubular solid oxide fuel cell stack operated with catalytically enhanced porous media fuel-rich combustor Zeng HY, Gong SQ, Shi YX, Wang YQ, Cai NS
163 - 172	Valorization of sewage sludge via a pyrolytic platform using carbon dioxide as a reactive gas medium Kim JH, Oh JI, Lee J, Kwon EE
173 - 185	Optimization of the performance, operation conditions and purge rate for a dead-ended anode proton exchange membrane fuel cell using an analytical model Dashti I, Asghari S, Goudarzi M, Meyer Q, Mehrabani-Zeinabad A, Brett DJL
186 - 198	Design optimization and control approach for a solar-augmented industrial heating Tilahun FB, Bhandari R, Mamo M
199 - 213	Effect of Li-LSX zeolite, NiCe/Al2O3 and NiCe/ZrO2 on the production of drop-in bio-fuels by pyrolysis and hydrotreating of Nannochloropsis and isochrysis microalgae Bagnato G, Boulet F, Sanna A
214 - 221	Long-term forecast of energy commodities price using machine learning Herrera GP, Constantino M, Tabak BM, Pistori H, Su JJ, Naranpanawa A
222 - 231	Design of energy harvester using rotating motion rectifier and its application on bicycle Yang YQ, Pian YW, Liu Q
232 - 245	Energy consumption, CO2 emissions and economic growth in developed, emerging and Middle East and North Africa countries Muhammad B
246 - 267	Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC) Ijaodola OS, El-Hassan Z, Ogungbemi E, Khatib FN, Wilberforce T, Thompson J, Olabi AG
268 - 279	Hydropower reservoir reoperation to adapt to large-scale photovoltaic power generation Ming B, Liu P, Guo SL, Cheng L, Zhang JW
280 - 294	Review and assessment of the different categories of demand response potentials Dranka GG, Ferreira P
295 - 305	Novel water hyacinth biodiesel as a potential alternative fuel for existing unmodified diesel engine: Performance, combustion and emission characteristics Alagu K, Venu H, Jayaraman J, Raju VD, Subramani L, Appavu P, Dhanasekar S
306 - 314	Fuel economy analysis under a WLTP cycle on a mid-size vehicle equipped with a thermoelectric energy recovery system Massaguer E, Massaguer A, Pujol T, Comamala M, Montoro L, Gonzalez JR
315 - 322	Effects of flow rate and fuel/air ratio on propagation behaviors of diffusion H-2/air flames in a micro-combustor Xiang Y, Yuan ZL, Wang SX, Fan AW
323 - 335	Optimal configuration for a low-temperature geothermal CHP plant based on thermoeconomic optimization Van Erdeweghe S, Van Bael J, Laenen B, D'haeseleer W
336 - 342	Charcoal as a bacteriological adherent for biomethanation of organic wastes Sanchez-Sanchez C, Gonzalez-Gonzalez A, Cuadros-Salcedo F, Gomez-Serrano V, Cuadros-Blazquez F
343 - 357	Investigating the effect of integrated CO2 and H2O on the reactivity and kinetics of biomass pellets oxy-steam combustion using new double parallel volumetric model (DVM) Mostafa ME, He LM, Xu J, Hu S, Wang Y, Su S, Hu X, Elsayed SA, Xiang J
358 - 372	Parameters identification of PV solar cells and modules using flexible particle swarm optimization algorithm Ebrahimi SM, Salahshour E, Malekzadeh M, Gordillo F
373 - 382	Energy harvesting performance of unimorph piezoelectric cantilever generator using interdigitated electrode lead zirconate titanate laminate Lee MS, Kim CI, Park WI, Cho JH, Paik JH, Jeong YH
383 - 391	Durability of V2O5-WO3/TiO2 selective catalytic reduction catalysts for heavy-duty diesel engines using B20 blend fuel Tan PQ, Wang SY, Hu ZY, Lou DM
392 - 406	An urbanization algorithm for districts with minimized emissions based on urban planning and embodied energy towards net-zero exergy targets Kilkis S, Kilkis B
407 - 421	Internal pore diffusion and adsorption impact on the soot oxidation in wall-flow particulate filters Macian V, Serrano JR, Piqueras P, Sanchis EJ
422 - 430	Synthesis, characterization and modification of monolithic ZSM-5 from geopolymer for CO2 capture: Experiments and DFT calculations Chen H, Zhang YJ, He PY, Li CJ
431 - 441	Study of low temperature combustion performance for composite metal catalysts prepared via rotating packed bed Guo Q, Liu YZ, Qi GS, Jiao WZ
442 - 453	Aerodynamic design of the high pressure and low pressure axial turbines for the improved coal-fired recompression SCO2 reheated Brayton cycle Han WL, Zhang YF, Li HZ, Yao MY, Wang YM, Feng ZP, Zhou D, Dan GJ
454 - 463	Investigation on the cycle performance and the combustion characteristic of two CO2-based binary mixtures for the transcritical power cycle Pan LS, Ma YJ, Li T, Li HX, Li B, Wei XL
464 - 474	Network constrained economic dispatch of integrated heat and electricity systems through mixed integer conic programming Huang SJ, Tang WC, Wu QW, Li CB
475 - 489	Experimental and kinetic study of the catalytic desorption of CO2 from CO2-loaded monoethanolamine (MEA) and blended monoethanolamine - Methyl-diethanolamine (MEA-MDEA) solutions Akachuku A, Osei PA, Decardi-Nelson B, Srisang W, Pouryousefi F, Ibrahim H, Idem R
490 - 501	Effects of assembly pressure on PEM fuel cell performance by taking into accounts electrical and thermal contact resistances Atyabi SA, Afshari E, Wongwises S, Yan WM, Hadjadj A, Shadloo MS
502 - 516	Photovoltaic thermal collectors: Experimental analysis and simulation model of an innovative low-cost water-based prototype Barone G, Buonomano A, Forzano C, Palombo A, Panagopoulos O
517 - 527	Fast pyrolysis of acid-washed oil palm empty fruit bunch for bio-oil production in a bubbling fluidized-bed reactor Park JW, Heo J, Ly HV, Kim J, Lim H, Kim SS
528 - 541	The influences of ignition modes on the performances for a motorcycle single cylinder gasoline engine at lean burn operation: Looking inside interaction between flame front and turbulence Chen YY, Liu AD, Deng BL, Xu ZX, Feng RH, Fu JQ, Liu XQ, Zhang GQ, Zhou LL
542 - 548	A new version of the large pressure jump (T-LPJ) method for dynamic study of pressure-initiated adsorptive cycles for heat storage and transformation Tokarev MM, Zlobin AA, Aristov YI
549 - 557	Simulation and experiment on thermal performance of a microchannel heat pipe under different evaporator temperatures and tilt angles Li GQ, Diallo TMO, Akhlaghi YG, Shittu S, Zhao XD, Ma XL, Wang YF
558 - 570	Experimental study on flame structure transitions of premixed propane/air in micro-scale planar combustors Tang AK, Cai T, Deng J, Zhao D, Huang QH, Zhou C
571 - 580	Study on the biomass-based integrated gasification combined cycle with negative CO2 emissions under different temperatures and pressures Xiang YL, Cai L, Guan YW, Liu WB, He TZ, Li J
581 - 592	Potential for energy and emissions of asymmetric twin-scroll turbocharged diesel engines combining inverse Brayton cycle system Zhu DT, Zheng XQ
593 - 602	CFD analysis of natural gas substitution with syngas in the industrial furnaces Jozwiak P, Hercog J, Kiedrzynska A, Badyda K
603 - 617	Influence of injection mode on the combustion characteristics of slight temperature rise combustion in gas turbine combustor with cavity Zhang RC, Huang XY, Fan WJ, Bai NJ
618 - 627	Integration of CO2 absorption with biological transformation via using rich ammonia solution as a nutrient source for microalgae cultivation Song CF, Xie ML, Qiu YT, Liu QL, Sun LC, Wang KL, Kansha Y
628 - 646	Experimental and theoretical study of thermoelectric generator waste heat recovery model for an ultra-low temperature PEM fuel cell powered vehicle Sulaiman MS, Singh B, Mohamed WANW
647 - 654	Mach number and energy loss analysis inside multi-stage Tesla valves for hydrogen decompression Qian JY, Chen MR, Gao ZX, Jin ZJ
655 - 668	Evaluation of the ground heat control capacity of a novel air-L-shaped TPCT-ground (ALTG) cooling system in cold regions Pei WS, Zhang MY, Lai YM, Yan ZR, Li SY
669 - 675	Catalytic pyrolysis of lignin for the production of aromatic hydrocarbons: Effect of magnesium oxide catalyst Ryu HW, Lee HW, Jae J, Park YK
676 - 684	Fabrication and electrochemical evaluation of micro-supercapacitors prepared by direct laser writing on free-standing graphite oxide paper Kumar R, Joanni E, Savu R, Pereira MS, Singh RK, Constantino CJL, Kubota LT, Matsuda A, Moshkalev SA
685 - 696	Hydropower change of the water tower of Asia in 21st century: A case of the Lancang River hydropower base, upper Mekong Zhong RD, Zhao TTG, He YH, Chen XH
697 - 708	Novel nanoscale control on soot formation by local CO2 micro-injection in ethylene inverse diffusion flames Duan JQ, Ying YY, Liu D
709 - 726	Working fluid selection and extensive sensitivity analysis for the thermodynamic optimization of a novel trigeneration cycle with two-phase expanders and compressors Briola S, Gabbrielli R, Fino A, Bischi A, Di Marco P
727 - 735	Experimental and numerical analysis of turbulent pulverized coal flame in a coaxial burner Ahn S, Tainaka K, Watanabe H, Kitagawa T
736 - 746	Non-condensable gas Co-Injection with steam for oil sands recovery Austin-Adigio M, Gates I
747 - 761	The share of cooling electricity in global warming: Estimation of the loop gain for the positive feedback Shakouri GH
762 - 770	Performance assessment of a combined system consisting of a high-temperature polymer electrolyte membrane fuel cell and a thermoelectric generator Guo XR, Zhang HC, Yuan JL, Wang JT, Zhao JP, Wang F, Miao H, Hou SJ
771 - 783	Techno-economic analysis for evaluating the potential feedstocks for producing hydro-processed renewable jet fuel in Taiwan Wang WC
784 - 791	The application and validity of various reaction kinetic models on woody biomass pyrolysis Ding YM, Zhang J, He QZ, Huang BQ, Mao SH
792 - 804	Evaluation and synergy of material and energy in the smelting process of ferrochrome pellets in steel belt sintering-submerged arc furnace Yu Y, Li BK, Wang CJ, Fang ZZ, Yang X, Tsukihashi F
805 - 814	Study on combustion characteristics and ignition limits extending of micro free-piston engines Wang Q, Wu F, Zhao Y, Bai J, Huang R
815 - 822	Sequential optimization of cooler and pump networks with different types of cooling Zhang HT, Feng X, Wang YF, Zhang Z
823 - 830	Appropriate mixing speeds of Rushton turbine for biohydrogen production from palm oil mill effluent in a continuous stirred tank reactor Srirugsa T, Prasertsan S, Theppaya T, Leevijit T, Prasertsan P
831 - 842	Modeling electricity consumption using nighttime light images and artificial neural networks Jasinski T
843 - 849	Experimental study on the electrospray and combustion characteristics of biodiesel-ethanol blends in a meso-scale combustor Jiang ZW, Gan YH, Ju YG, Liang JL, Zhou Y
850 - 862	Thermodynamic assessment of a condenser outlet split ejector-based high temperature heat pump cycle using various low GWP refrigerants Bai T, Yan G, Yu JL
863 - 875	Energy efficiency evaluation and energy saving based on DEA integrated affinity propagation clustering: Case study of complex petrochemical industries Geng ZQ, Zeng RF, Han YM, Zhong YH, Fu H
876 - 889	Entropy analysis on energy-consumption process and improvement method of temperature/vacuum swing adsorption (TVSA) cycle Li SJ, Deng S, Zhao RK, Zhao L, Xu WC, Yuan XZ, Guo ZH
890 - 915	Model establishment and performance evaluation of a modified regenerative system for a 660 MW supercritical unit running at the IPT-setting mode Wang YH, Cao LH, Hu PF, Li B, Li Y
916 - 927	Model predictive control for thermal energy storage assisted large central cooling systems Shan K, Fan C, Wang JY
928 - 937	Combined effects of water emulsion and diethyl ether additive on combustion performance and emissions of a compression ignition engine using biodiesel blends Dinesha P, Kumar S, Rosen MA
938 - 959	Development of a new integrated structure for simultaneous generation of power and liquid carbon dioxide using solar dish collectors Piadehrouhi F, Ghorbani B, Miansari M, Mehrpooya M
960 - 974	Performance evaluation of generator air coolers for the hydro-power plant of Aswan High Dam at Egypt El-Zohri EH, Shafey HM, Kahoul A
975 - 988	Energy saving obtainable by applying a commercially available M-cycle evaporative cooling system to the air conditioning of an office building in North Italy Zanchini E, Naldi C
989 - 1003	P-graph-based multi-objective risk analysis and redundancy allocation in safety-critical energy systems Sule Z, Baumgartner J, Dorgo G, Abonyi J
1004 - 1016	A mathematical model for microalgae-based biobutanol supply chain network design under harvesting and drying uncertainties Arabi M, Yaghoubi S, Tajik J
1017 - 1035	Multi-objective linear regression based optimization of full repowering a single pressure steam power plant Mehrpanahi A, Naserabad SN, Ahmadi G
1036 - 1053	Full-scale CFD investigation of gas-particle flow, interactions and combustion in tangentially fired pulverized coal furnace Belosevic S, Tomanovic I, Crnomarkovic N, Milicevic A
1054 - 1066	Customised retrofit of heat exchanger network combining area distribution and targeted investment Lai YQ, Alwi SRW, Manan ZA
1067 - 1081	Fully nonlinear analysis incorporating viscous effects for hydrodynamics of an oscillating wave surge converter with nonlinear power take-off system Cheng Y, Ji CY, Zhai GJ
1082 - 1093	Properties effect of blending fischer-tropsch aviation fuel on spray performances Zhou GY, Zhou JH, Fang Y, Yang XY
1094 - 1102	A study on thermodynamic and transport properties of carbon dioxide using molecular dynamics simulation Chen L, Wang SY, Tao WQ
1103 - 1113	Effects of the aqueous phase recycling on bio-oil yield in hydrothermal liquefaction of Spirulina Platensis, alpha-cellulose, and lignin Chen HT, He ZX, Zhang B, Feng H, Kandasamy S, Wang B
1114 - 1123	Effect of shroud end wall structure on tip leakage flow in highly loaded helium compressor rotor Tian ZT, Zheng Q, Liu PF, Malik A, Jiang B
1124 - 1132	Solar pyrolysis of cotton stalk in molten salt for bio-fuel production Xie YP, Zeng K, Flamant G, Yang HP, Liu N, He X, Yang XY, Nzihou A, Chen HP
1133 - 1154	Online reduced kernel GLRT technique for improved fault detection in photovoltaic systems Fezai R, Mansouri M, Trabelsi M, Hajji M, Nounou H, Nounou M
1155 - 1175	Optimal design of renewable energy solution sets for net zero energy buildings Harkouss F, Fardoun F, Biwole PH
1176 - 1190	Sustainability performance assessment of wind power coupling hydrogen storage projects using a hybrid evaluation technique based on interval type-2 fuzzy set Wu YN, Xu CB, Zhang BY, Tao Y, Li XY, Chu H, Liu FT
1191 - 1204	Exergy analysis and performance evaluation of a newly developed integrated energy system for quenchable generation Ishaq H, Dincer I
1205 - 1216	Carbon and sulfur conversion of petroleum coke in the chemical looping gasification process Wang LL, Feng X, Shen LH, Jiang SX, Gu HM
1217 - 1234	Blade shape effect on the behavior of the H-rotor Darrieus wind turbine: Performance investigation and force analysis Mohamed MH, Dessoky A, Alqurashi F
1235 - 1245	Strategy of adjusting recirculation ratio for biohythane production via recirculated temperature-phased anaerobic digestion of food waste Qin Y, Wu J, Xiao BY, Cong M, Hojo T, Cheng J, Li YY
1246 - 1264	Techno-economic assessment of seasonal heat storage in district heating with thermochemical materials Bohm H, Lindorfer J
1265 - 1278	Uncertainty-resistant stochastic MPC approach for optimal operation of CHP microgrid Zhang Y, Meng FL, Wang R, Kazemtabrizi B, Shi JM
1279 - 1287	Thermodynamic analysis of a solar thermochemical cycle-based direct coal liquefaction system for oil production Kong H, Kong XH, Wang J, Zhang J
1288 - 1301	Testing European goals for the Spanish electricity system using a disaggregated CGE model Langarita R, Duarte R, Hewings G, Sanchez-Choliz J
1302 - 1319	Predictive management for energy supply networks using photovoltaics, heat pumps, and battery by two-stage stochastic programming and rule-based control Wakui T, Sawada K, Yokoyama R, Aki H