화학공학소재연구정보센터

Chemical Engineering Research & Design

Chemical Engineering Research & Design, Vol.86, No.12A Entire volume, number list
ISSN: 0263-8762 (Print) 

In this Issue (18 articles)

1311 - 1312 6th International Symposium on Mixing in Industrial Processes
Xuereb C, Tanguy P
1313 - 1321 A measure of mixing from Lagrangian tracking and its application to granular and fluid flow systems
Doucet J, Bertrand F, Chaouki J
1322 - 1330 LES and URANS simulations of hydrodynamics in mixing tank: Comparison to PIV experiments
Delafosse A, Line A, Morchain J, Guiraud P
1331 - 1344 CFD modeling of gas-liquid-solid mechanically agitated contactor
Panneerselvam R, Savithri S, Surender GD
1345 - 1349 Mass-transfer characteristics by surface aeration of large paddle impeller: Application to a polymerization reactor with liquid level change
Yatomi R, Takenaka K, Takahashi K, Tanguy PA
1350 - 1362 Mixing and gas dispersion in mineral flotation cells
Evans GM, Doroodchi E, Lane GL, Koh PTL, Schwarz MP
1363 - 1368 Mixing by solid particles
Derksen JJ
1369 - 1381 Deagglomeration processes in high-shear devices
Baldyga J, Makowski L, Orciuch W, Sauter C, Schuchmann HP
1382 - 1387 High-speed visualization of multiphase dispersions in a mixing tank
Guevara-Lopez E, Sanjuan-Galindo R, Cordova-Aguilar MS, Corkidi G, Ascanio G, Galindo E
1388 - 1396 Surfactant-covered drops between parallel plates
Janssen PJA, Anderson PD
1397 - 1409 Flow pattern, periodicity and energy dissipation in a batch rotor-stator mixer
Utomo AT, Baker M, Pacek AW
1410 - 1422 A mapping method based on Gaussian quadrature: Application to viscous mixing
Stobiac V, Heniche M, Devals C, Bertrand F, Tanguy P
1423 - 1433 In-mixer measurements for describing mixture evolution during concrete mixing
Cazacliu B
1434 - 1440 Mixing analysis of a Newtonian fluid in a 3D planetary pin mixer
Connelly RK, Valenti-Jordan J
1441 - 1446 Novel static mixers for surge dampening
Nauman EB, Smith OJ
1447 - 1453 Flow and mixing characteristics of sigma-type plate static mixer with splitting and inverse recombination
Ohkawa K, Nakamoto T, Izuka Y, Hirata Y, Inoue Y
1454 - 1461 Mixing by rotary jet heads: Indications of the benefits of head rotation under turbulent and transitional flow conditions
Nordkvist M, Vognsen M, Nienow AW, Villadsen J, Gernaey KV
1462 - 1476 Modeling flow and residence time distribution in an industrial-scale reactor with a plunging jet inlet and optional agitation
Bai H, Stephenson A, Jimenez J, Jewell D, Gillis P