화학공학소재연구정보센터

Chemical Engineering Research & Design

Chemical Engineering Research & Design, Vol.145 Entire volume, number list
ISSN: 0263-8762 (Print) 

In this Issue (32 articles)

1 - 11 Optimal design of ring-shaped alumina catalyst: A way to intensify bioethanol-to-ethylene production in multi-tubular reactor
Ovchinnikova EV, Banzaraktsaeua SP, Chumachenko VA
12 - 18 Experimental study of the effects of apex section internals and conical section length on the performance of solid-liquid hydrocyclone
Han TL, Liu HY, Xiao H, Chen AQ, Huang QS
19 - 28 Urban wastewater reuse using a coupling between nanofiltration and ozonation: Techno-economic assessment
Mendret J, Azais A, Favier T, Brosillon S
29 - 47 An automata based hybrid modeling approach to synthesize sequential diagnostic tests
Feng ST, Chen YC, Chang CT
48 - 52 Design and optimization of energy-efficient liquid-only side-stream distillation configurations using a stochastic algorithm
Cui CT, Zhang XD, Sun JS
53 - 63 Economical retrofit of reactive distillation with a total reflux design or a total boil-up design
Long NVD, Lee M
64 - 75 Fabrication and characterization of a high-flux and antifouling polyethersulfone membrane for dye removal by embedding Fe3O4-MDA nanoparticles
Koulivand H, Shahbazi A, Vatanpour V
76 - 84 Experimental investigation of liquid disintegration on slotted disc in centrifugal atomization process
Kumar P, Sarkar S
85 - 98 Modified forward osmosis membranes by two amino-functionalized ZnO nanoparticles: A comparative study
Darabi RR, Peyravi M, Jahanshahi M
99 - 111 Titanate nanotubes-incorporated poly(vinyl alcohol) mixed matrix membranes for pervaporation separation of water-isopropanol mixtures
Raeisi Z, Moheb A, Sadeghi M, Abdolmaleki A, Alibouri M
112 - 121 Separation of phenol and pyridine from coal tar via liquid-liquid extraction using deep eutectic solvents
Jiao TT, Qin XZ, Zhang HW, Zhang WR, Zhang YQ, Liang P
122 - 127 Natural convection mass and heat transfer at a horizontal spiral tube heat exchanger
Abdel-Aziz MH, Sedahmed GH
128 - 140 Effects of the wake flow on bubble patterns downstream of a cylindrical nozzle
Kang C, Zhang W, Mao N, Zhang YC
141 - 149 A new static cyclonic classifier: Flow characteristics, performance evaluation and industrial applications
Sun ZP, Sun GG, Peng PY, Liu QG, Yu XQ
150 - 158 Numerical investigation on urea particle removal in a spray scrubber using particle capture theory
Wang SM, Wang JR, Song C, Wen J
159 - 172 Microscopic modeling and optimal operation of thermal atomic layer deposition
Ding YY, Zhang YC, Kim K, Tran A, Wu Z, Christofides PD
173 - 183 Model predictive control of phthalic anhydride synthesis in a fixed-bed catalytic reactor via machine learning modeling
Wu Z, Tran A, Ren YM, Barnes CS, Chen S, Christofides PD
184 - 193 Effect of boiling point rankings and feed locations on the applicability of reactive distillation to quaternary systems
Muthia R, van der Ham AGJ, Jobson M, Kiss AA
194 - 202 Formation of Fe3O4@ZrO2 nanocomposite and its performance as a magnetic adsorbent for phosphate uptake: Influences of end-point pH and stirring rate during synthesis process
Fang WK, Wang Z, Xie Q, Liu Y, Wu DY
203 - 212 A simplified capillary model for hydrodynamics simulation of cryogel continuous beds and particle packed beds
Liu CJ, Zhang HY, Chen L, Dai B
213 - 225 New insights into the pressure during the merged droplet formation in the squeezing time
Han WB, Chen XY
226 - 234 Development of CFD model for membrane-based energy recovery ventilators
Jafarizave M, Khaleghi A, Rezakazemi M
235 - 244 Amino group functionalized SiO2@graphene oxide for efficient removal of Cu(II) from aqueous solutions
Li M, Feng J, Huang K, Tang S, Liu RH, Li H, Ma FY, Meng XJ
245 - 257 Chemical kinetics of a two-step transesterification of dyacrodes edulis seed oil using acid-alkali catalyst
Esonye C, Onukwuli OD, Ofoefule AU
258 - 267 Mechanism analysis of gas solid flow non-uniformity problem of 330 MW CFB boiler
Zhang Y, Zhang M, Zhu SH, Huang YQ, Deng BY, Gao XY, Jiang XG, Lyu JF, Yang HR
268 - 278 Effect and optimization parameters of phenol removal in emulsion liquid membrane process via fractional-factorial design
Rosly MB, Jusoh N, Othman N, Rahman HA, Noah NFM, Sulaiman RNR
279 - 287 Applying forward mixing model in an L-shape pulsed packed extraction column to investigate the influence of drop size distribution on mass transfer
Khooshechin S, Safdari J, Moosavian MA, Mallah MH
288 - 299 Transitional phase modeling and monitoring with respect to the effect of its neighboring phases
Gao ZP, Jia MX, Mao ZZ, Zhao LP
300 - 313 Optimisation of a downstream oil supply chain with new pipeline route planning
Wang BH, Liang YT, Zheng TC, Yuan M, Zhang HR
314 - 322 Effect of gas distributor on gas-liquid dispersion and mass transfer characteristics in stirred tank
Liu BQ, Xiao Q, Sun N, Gao PF, Fan FY, Sunden B
323 - 333 Photocatalytic process for the tetracycline removal under visible light: Presenting a degradation model and optimization using response surface methodology (RSM)
Galedari M, Ghazi MM, Mirmasoomi SR
334 - 342 Hydraulics and mass transfer performance of an advanced wire gauze structured packing under deep vacuum distillation conditions
Schulz R, Rietfort T, Jansen H, Olujic Z