화학공학소재연구정보센터

Chemical Engineering & Technology

Chemical Engineering & Technology, Vol.43, No.5 Entire volume, number list
ISSN: 0930-7516 (Print) 

In this Issue (26 articles)

788 - 788 PARTEC 2019-Overcome the Challenges in Particle and Powder Technology
Heinrich S
789 - 796 Characterization of Lyophilization of Frozen Bulky Solids
Foerst P, Gruber S, Schulz M, Vorhauer N, Tsotsas E
797 - 803 Formation of Aluminum-Doped Zinc Oxide Nanocrystals via the Benzylamine Route at Low Reaction Kinetics
Ungerer J, Thurm AK, Garnweitner G, Nirschl H
804 - 812 Measurement of Residence Time Distributions in a Continuously Operated Spouted Bed
Pietsch S, Sch?nherr M, J?ger FK, Heinrich S
813 - 818 Control of Particle Size and Porosity in Continuous Fluidized-Bed Layering Granulation Processes
Neugebauer C, B?ck A, Kienle A
819 - 829 Modeling the Electrical Conductive Paths within All-Solid-State Battery Electrodes
Gimenez CS, Helmers L, Schilde C, Diener A, Kwade A
830 - 837 Numerical Investigation of Funicular Liquid Bridge Interactions Between Spherical Particles
Di Renzo A, Picarelli G, Di Maio FP
838 - 847 Comminution of Wood - Influence of Process Parameters
Eisenlauer M, Teipel U
848 - 858 Verification and Validation of Spatially Averaged Models for Fluidized Gas-Particle Suspensions
Schneiderbauer S
859 - 868 Reconstitution of Food Powders Granulated with Oil-in-Water Emulsions
Rieder A, Franceschinis E, De Santi M, Realdon N, Santomaso AC
869 - 878 Jet Dispersion of Multiwall Carbon Nanotubes and Correlation with Suspension Rheology
Dresel A, Teipel U
879 - 886 In Situ Monitoring of Particle Formation with Spectroscopic and Analytical Techniques Under Solvothermal Conditions
Embrechts H, Hartmann M, Peukert W, Distaso M
887 - 895 Contact Behavior of Microcrystalline Cellulose Pellets Depending on their Water Content
Grohn P, Weis D, Thommes M, Heinrich S, Antonyuk S
896 - 903 Model-Based Optimization of Ripening Processes with Feedback Modules
Spinola M, Keimer A, Segets D, Leugering G, Pflug L
904 - 912 Influence of the Temperature on Coccolith-Containing Systems from Emiliania huxleyi Cultivations
Chairopoulou MA, Kratzer F, Gross R, Herrmann M, Teipel U
913 - 922 Multiscale Modeling of Superheated Steam Drying of Particulate Materials
Le KH, Tran TTH, Nguyen NA, Kharaghani A
923 - 932 One-Piece Stainless-Steel 3D Printed Minichannel Evaporators using Flow Boiling Carbon Dioxide
Kneer A, Wirtz M, Bozkurt MC, Solohub A, Laufer T, Hauf M, Altmannsberger T, Bieg H, Barbe S
933 - 941 Triboelectric Charging and Separation of Fine Powder Mixtures
Hansen L, Wollmann A, Weers M, Benker B, Weber AP
942 - 949 Effectiveness of Amine Concentration and Circulation Rate in the CO2 Removal Process
George EC, Riverol C
950 - 963 Modeling of Ethylene Glycol Production from Glucose in a Semi-Continuous Reactor
Murillo C, Irakoze G, Vigier KD, Delmas M, Jerome F, Peres Y, Urrutigoity M, Cognet P
964 - 973 Experimental Investigation of Decentralized Process Control for Reactive Dividing-Wall Columns
Egger LS, Fieg G
974 - 982 Removal of Cu2+ from Water Using Liquid-Liquid Microchannel Extraction
Liu H, Dai S, Li J, Ma R, Cao Y, Wang G, Komarneni S, Luo JH
983 - 994 Biological Water Treatment by a Hybrid Fluidized-Bed Bioreactor: Theoretical Study
Tabis B, Boron D, Bizon K
995 - 1004 Effect of Surface Tension on Hydrodynamics and Mass Transfer Coefficient in Airlift Reactors
Kumar N, Gupta R, Bansal A
1005 - 1015 Design and Computational Fluid Dynamics Analysis of a Three-Phase Decanter Centrifuge for Oil-Water-Solid Separation
Zhu MJ, Hu DP, Xu YF, Zhao SB
1016 - 1020 Influence of the Mineral Content on the Emissivity of Hydrothermal Char
Graeser P, Portner L, Schiemann M