화학공학소재연구정보센터

Canadian Journal of Chemical Engineering

Canadian Journal of Chemical Engineering, Vol.75, No.2 Entire volume, number list
ISSN: 0008-4034 (Print) 

In this Issue (24 articles)

273 - 281 Factors Influencing the Efficacy of an Interfacial Modifier for the Interface in an Immiscible Polymer Blend
Favis BD, Cigana P, Matos M, Tremblay A
282 - 289 Pressure Drops in Gas-Liquid Flow in a 15 cm Reciprocating Plate Column
Baird MH, Rao NV
290 - 298 Liquid Circulation and Mixing in an Inclined Bubble-Column
Lu GZ, Bittorf K, Thompson BG, Gray MR
299 - 306 Gas-Liquid Dispersion and Mixing Characteristics and Heat-Transfer in a Stirred Vessel
Xu GJ, Li YM, Hou ZZ, Feng LF, Wang K
307 - 316 The Mean Flow-Field Generated by a Pitched Blade Turbine - Changes in the Circulation Pattern Due to Impeller Geometry
Mao DM, Feng LF, Wang K, Li YL
317 - 326 Modeling a Circulating Fluidized-Bed Riser Reactor with Gas-Solids Downflow at the Wall
Puchyr DM, Mehrotra AK, Behie LA, Kalogerakis NE
327 - 332 Prediction of Optimum Operating-Conditions of Liquid Fluidized-Bed Systems
Jamialahmadi M, Malayeri MR, Mullersteinhagen H
333 - 338 Liquid-Solid Mass-Transfer at Vertical Screens in Bubble-Columns
Zaki MM, Nirdosh I, Sedahmed GH
339 - 345 Study of Humic-Acid Adsorption on Nanofiltration Membranes by Contact-Angle Measurements
Bouchard CR, Jolicoeur J, Kouadio P, Britten M
346 - 352 Investigation of Coke Extraction from Zeolite-Hy Under Supercritical and Near-Critical Conditions
Niu FH, Hofmann H
353 - 361 Study on a Cool Storage-System Using HCFC (Hydro-Chloro-Fluoro-Carbon)-141B(Cci2Fch3) (1,1-Dichloro-1-Fluoro-Ethane) Clathrate
Tanii T, Minemoto M, Nakazawa K, Ando Y
362 - 368 Absorption with Zero and Pseudo-Zero Order Chemical-Reaction
Prisciandaro M, Pepe F
369 - 378 The Catalytic Oxidative Coupling of Methane .2. Axial Gas Sample Probing in a Bubbling Fluidized-Bed Reactor and the Effect of Side Reactions
Do KT, Edwards JH, Tyler RJ
379 - 390 Recovery, Characterization and Conceptual Modeling of Non-Bituminous Organic Materials from Oil Sands
Sengupta S, Tollefson EL, Dalai AK
391 - 401 Conversion of Canola Oil to Various Hydrocarbons over Pt/HZSM-5 Bifunctional Catalyst
Katikaneni SP, Adjaye JD, Bakhshi NN
402 - 413 Effect of Process Variables on Scale Formation in Steel Reheating
Ormerod RC, Becker A, Grandmaison EW, Pollard A, Sobiesiak A
414 - 421 Study on the Optimal Operating Conditions for the Synthesis of 2-Furyloxirane Using Empirical and Mechanistic Models
Uhlemann J, Borredon E, Gaset A
422 - 436 Choosing the Right Model - Case-Studies on the Use of Statistical-Model Discrimination Experiments
Burke AL, Duever TA, Penlidis A
437 - 451 Optimized Design of Waste-Water Treatment Systems - Application to the Mechanical Pulp and Paper-Industry .1. Design and Cost Relationships
Fels M, Pinter J, Lycon DS
452 - 459 Slugging Characteristics of Group-D Particles in Fluidized-Beds
Dimattia DG, Amyotte PR, Hamdullahpur F
460 - 465 Minimum Spouting Velocity of Conical Spouted Beds
Bi HT, Macchi A, Chaouki J, Legros R
466 - 470 3-Dimension Imaging of Particle Clusters in Dilute Gas-Solid Suspension Flow
Tsukada M, Ito M, Kamiya H, Horio M
471 - 475 Vapor Permeation Applied for the Separation of Water from Organic-Compounds and Gases Using Asymmetric Polyetherimide/Polyvinylpyrrolidone Capillary Tubes
Cranford RJ, Roy C, Matsuura T
476 - 479 On Bitumen Liberation from Oil Sands
Basu S, Nandakumar K, Masliyah JH