Applied Surface Science

Applied Surface Science, Vol.288 Entire volume, number list
ISSN: 0169-4332 (Print) 

In this Issue (102 articles)

1 - 8 CO2 laser coating of nanodiamond on aluminum using an annular beam
Blum R, Molian P
9 - 14 Pulse laser machining and particulate separation from high impact polystyrene
Arif S, Kautek W
15 - 25 Nanostructured WS2-Ni composite films for improved oxidation, resistance and tribological performance
Xu SS, Gao XM, Hu M, Sun JY, Jiang D, Zhou F, Liu WM, Weng LJ
26 - 33 Experimental and numerical study of residual stress evolution in cold spray coating
Ghelichi R, Bagherifard S, MacDonald D, Fernandez-Pariente I, Jodoin B, Guagliano M
34 - 39 Nanosecond laser surface modification of AISI 304L stainless steel: Influence the beam overlap on pitting corrosion resistance
Pacquentin W, Caron N, Oltra R
40 - 43 Evolution of Raman spectra in n-InAs wafer with annealing temperature
Deng HY, Guo JH, Zhang Y, Cong R, Hu GJ, Yu GL, Dai N
44 - 50 Improvement of adhesion strength and scratch resistance of fluorocarbon thin films by cryogenic treatment
Jiang XJ, Wang J, Shen JP, Li R, Yang GC, Huang H
51 - 59 A facile approach for the synthesis of magnetic separable Fe3O4@TiO2, core shell nanocomposites as highly recyclable photocatalysts
Xin TJ, Ma ML, Zhang HP, Gu JW, Wang SJ, Liu MJ, Zhang QY
60 - 68 Facile fabrication of core-shell Pr6O11-ZnO modified silane coatings for anti-corrosion applications
Jothi KJ, Palanivelu K
69 - 75 Density functional theory studies of electronic properties of PdAg/Pd surface alloys
Li Q, Song LJ, Pan LH, Chen YC, Ling ML, Zhuang XL, Zhang XT
76 - 82 Effect of complexing agent TEA: The structural, morphological, topographical and optical properties of FexSx nano thin films deposited by SILAR technique
Manikandan K, Mani P, Dilip CS, Valli S, Inbaraj PFH, Prince JJ
83 - 89 Atomic scale fabrication of dangling bond structures on hydrogen passiyated Si(001) wafers processed and nanopackaged in a clean room environment
Kolmer M, Godlewski S, Zuzak R, Wojtaszek M, Rauer C, Thuaire A, Hartmann JM, Moriceau H, Joachim C, Szymonski M
90 - 97 The effect of pretreatment conditions on structural, morphological and catalytic properties of TiO2
Kocemba I, Nadajczyk J, Rynkowski J, Maniukiewicz W
98 - 108 Investigating phosphonate monolayer stability on ALD oxide surfaces
Branch B, Dubey M, Anderson AS, Artyushkova K, Baldwin JK, Petsev D, Dattelbaum AM
109 - 114 The influence of different locations of sputter guns on the morphological and structural properties of Cu-In-Ga precursors and Cu(ln,Ga)Se-2 thin films
Wang J, Zhu J, He YX
115 - 121 Ag (100)/MgO(100) interface: A van der Waals density functional study
He BL, Ma DW, Hao W, Xiao W, Tian ZX
122 - 129 Characterization of ester- or thioamide-functionalized single-walled carbon nanotube-azithromycin conjugates
Darabi HR, Roozkhosh A, Tehrani MJ, Aghapoor K, Sayahi H, Balavar Y, Mohsenzadeh F
130 - 137 Coating of biodegradable magnesium alloy bone implants using nanostructured diopside (CaMgSi2O6)
Razavi M, Fathi M, Savabi O, Beni BH, Razavi SM, Vashaee D, Tayebi L
138 - 142 Preparation of CdIn2S4 microspheres and application for photocatalytic reduction of carbon dioxide
Jiang WL, Yin XH, Xin F, Bi YD, Liu Y, Li X
143 - 148 Osteoblast response on co-modified titanium surfaces via anodization and electrospinning
Bayram C, Demirbilek M, Yalcin E, Bozkurt M, Dogan M, Denkbas EB
149 - 157 Magnetic chitosan nanocomposite for hyperthermia therapy application: Preparation, characterization and in vitro experiments
Shete PB, Patil RM, Thorat ND, Prasad A, Ningthoujam RS, Ghosh SJ, Pawar SH
158 - 165 The negative temperature coefficient resistivities of Ag2S-Ag core shell structures
Yu MM, Liu DZ, Li W, Zhou XQ
166 - 171 The effect of substrate temperature on structural and morphological properties of Au/Si(111) thin films
Marconi D, Ungurean A
172 - 179 Synthesis of hollow CdS micro-fnanospheres by CoSP technique and their visible light photocatalytic activities
Kumar N, Dutta V
180 - 192 Synthesis and characterization of Fe3O4@ZnS and Fe3O4@Au@ZnS core-shell nanoparticles
Stefan M, Leostean C, Pana O, Soran ML, Suciu RC, Gautron E, Chauvet O
193 - 200 Development of a nanostructured lipid carrier formulation for increasing photo-stability and water solubility of Phenylethyl Resorcinol
Fan HF, Liu GQ, Huang YQ, Li Y, Xia Q
201 - 207 TiO2 anatase films obtained by direct liquid injection atomic layer deposition at low temperature
Avril L, Reymond-Laruinaz S, Decams JM, Bruyere S, Potin V, de Lucas MCM, Imhoff L
208 - 214 Correlation between contact surface and friction during the optical glass polishing
Belkhir N, Aliouane T, Bouzid D
215 - 221 Domain growth of carbon nanotubes assisted by dewetting of thin catalyst precursor films
Srivastava AK, Sachan P, Samanta C, Mukhopadhyay K, Sharma A
222 - 228 Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition
Kwon MH, Shin HS, Chu CN
229 - 237 An optimization of superhydrophobic polyvinylidene fluoride/zinc oxide materials using Taguchi method
Mohamed AMA, Jafari R, Farzaneh M
238 - 243 Theoretical study on electronic and optical properties of In0.53Ga0.47As (100) beta 2 (2 x 4) surface
Guo J, Chang BK, Jin MC, Yang MZ, Wang HG, Wang MS, Huang JC, Zhou L, Zhang YJ
244 - 250 DFT plus U study on the oxygen adsorption and dissociation on CeO2-supported platinum cluster
Nguyen TQ, Escano MCS, Nakanishi H, Kasai H, Maekawa H, Osumi K, Sato K
251 - 257 Rapid surface treatment of polyamide 12 by microwave plasma jet
Hnilica J, Potocnakova L, Stupavska M, Kudrle V
258 - 264 Influences of post-annealing conditions on the formation of delafossite-CuFeO2 thin films
Chen HY, Fu GW
265 - 274 Functions of Trilon (R) P as a polyamine in copper chemical mechanical polishing
Jiang L, Lan YQ, He YY, Li YZ, Luo JB
275 - 287 Surface structures and thermodynamics of low-index of rutile, brookite and anatase - A comparative DFT study
Esch TR, Gadaczek I, Bredow T
288 - 294 A study of the initial film growth of PEG-like plasma polymer films via XPS and NEXAFS
Li YL, Muir BW, Easton CD, Thomsen L, Nisbet DR, Forsythe JS
295 - 303 Treatments of paper surfaces with sol-gel coatings for laminated plywood
Wang SX, Jamsa S, Mahlberg R, Ihalainen P, Nikkola J, Mannila J, Ritschkoff AC, Peltonen J
304 - 312 Deposition of alumina stabilized zirconia at room temperature by plasma focus device
Khan IA, Rawat RS, Ahmad R, Shahid MAK
313 - 323 Surface morphology and phase transformations of femtosecond laser-processed sapphire
Vilar R, Sharma SP, Almeida A, Cangueiro LT, Oliveira V
324 - 330 Determination of the thermal properties of AlB2-type WB2
Jiang CL, Pei ZL, Liu YM, Lei H, Gong J, Sun C
331 - 340 The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainless steel human body implant
Sharifnabi A, Fathi MH, Yekta BE, Hossainalipour M
341 - 348 Fabrication of lotus-leaf-like superhydrophobic surfaces via Ni-based nano-composite electro-brush plating
Liu HT, Wang XM, Ji HM
349 - 355 Preparation and characterization of energetic materials coated superfine aluminum particles
Liu SS, Ye MQ, Han AJ, Chen X
356 - 362 Cassava root husks powder as green adsorbent for the removal of Cu(II) from natural river water
Jorgetto AO, Silva RIV, Saeki MJ, Barbosa RC, Martines MAU, Jorge SMA, Silva ACP, Schneider JF, Castro GR
363 - 368 Contrastive study of structure and photocatalytic performance with three-dimensionally ordered macroporous CuO-TiO2 and CuO/TiO2
Yang RC, Yang LJ, Tao TX, Ma FY, Xu MD, Zhang ZH
369 - 372 Solvothermal synthesis of BiOBr thin film and its photocatalytic performance
Liu ZS, Wu BT, Niu JN, Huang X, Zhu YB
373 - 380 Functionalisation of mesoporous silica gel with 2-[(phosphonomethyl)-amino]acetic acid functional groups. Characterisation and application
Caldarola D, Mitev DP, Marlin L, Nesterenko EP, Paull B, Onida B, Bruzzoniti MC, De Carlo RM, Sarzanini C, Nesterenko PN
381 - 391 Elimination of impurity phase formation in FePt magnetic thin films prepared by pulsed laser deposition
Wang Y, Medwal R, Sehdev N, Yadian B, Tan TL, Lee P, Talebitaher A, Ilyas U, Ramanujan RV, Huang YZ, Rawat RS
392 - 397 Surface and interface study of U/Si (111)
Chen QY, Feng W, Zhu XG, Luo LZ, Xie DH, Tan SY, Lai XC
398 - 404 Phase transformation-induced crystal plane effect of iron oxide micropine dendrites on gaseous toluene photocatalytic oxidation
Wu HJ, Wang LD
405 - 410 Neutron-reflectometry study of alcohol adsorption on various DLC coatings
Kalin M, Simic R, Hirayama T, Geue T, Korelis P
411 - 415 Impact of rapid thermal annealing on structural, optical and electrical properties of DC sputtered doped and co-doped ZnO thin film
Gupta CA, Mangal S, Singh UP
416 - 422 Influence of accelerating gas flow rate on the particle cohesion in room temperature cold sprayed scattering layer for plastic-based dye-sensitized solar cells
He XL, Yang GJ, Li CJ, Li CX
423 - 429 Low energy SIMS characterization of passive oxide films formed on a low-nickel stainless steel in alkaline media.
Fajardo S, Bastidas DM, Ryan MP, Criado M, McPhail DS, Morris RJH, Bastidas JM
430 - 434 Atomic layer deposited Al2O3 films for anti-reflectance and surface passivation applications
Zhu LQ, Liu YH, Zhang HL, Xiao H, Guo LQ
435 - 443 The origin of the curing behavior, mechanical and thermal properties of surface functionalized attapulgite/bismaleimide/diallylbisphenol composites
Zhao L, Liu P, Liang GZ, Gu AJ, Yuan L, Guan QB
444 - 451 Optically active SiO2/TiO2/polyacetylene multilayered nanospheres: Preparation, characterization, and application for low infrared emissivity
Bu XH, Zhou YM, He M, Chen ZJ, Zhang T
452 - 457 Density functional theory study on the mechanism of CO sensing on Cu2O (111) surface: Influence of the pre-adsorbed oxygen atom
Shen YY, Tian FH, Chen SG, Ma ZQ, Zhao LH, Jia XF
458 - 465 Instrument response of reflection high energy electron diffraction pole figure
Chen L, Dash J, Su P, Lin CF, Bhat I, Lu TM, Wang GC
466 - 477 Surface characterization and effectiveness evaluation of anti-graffiti coatings on highly porous stone materials
Lettieri M, Masieri M
478 - 481 Structural stability of scandium on nonpolar GaN (1 1 (2)over-bar 0) and (1 0 (1)over-bar 0) surfaces: A first-principles study
Gonzalez-Hernandez R, Martinez G, Lopez-Perez W, Rodriguez JA
482 - 487 Effects of Si doping on the strain relaxation of metamorphic (Al)GaInP buffers grown on GaAs substrates
Li KL, Dong JR, Sun YR, Zeng XL, Zhao YM, Yu SZ, Zhao CY, Yang H
488 - 496 Correlation between wetting, adhesion and adsorption in the polymer-aqueous solutions of ternary surfactant mixtures-air systems
Szymczyk K, Zdziennicka A, Krawczyk J, Janczuk B
497 - 502 Protection of aluminium foil AA8021 by molybdate-based conversion coatings
Liang CS, Lv ZF, Zhu YL, Xu SA, Wang H
503 - 512 The photoactivity of titanium dioxide coatings with silver nanoparticles prepared by sol-gel and reactive magnetron sputtering methods -comparative studies
Kadziola K, Piwonski I, Kisielewska A, Szczukocki D, Krawczyk B, Sielski J
513 - 517 Electrodeposition preparation of Ag nanoparticles loaded TiO2 nanotube arrays with enhanced photocatalytic performance
Liu X, Liu ZQ, Lu JL, Wu XL, Xu B, Chu W
518 - 523 Synthesis of novel reactive N-halamine precursors and application in antimicrobial cellulose
Jiang ZM, Ma KK, Du JM, Li R, Ren XH, Huang TS
524 - 529 Gold nanoparticles directly modified glassy carbon electrode for non-enzymatic detection of glucose
Chang G, Shu HH, Ji K, Oyama M, Liu X, He YB
530 - 536 Electrodeposition mechanism and characterization of Ni-Cu alloy coatings from a eutectic-based ionic liquid
Wang SH, Guo XW, Yang HY, Dai JC, Zhu RY, Gong J, Peng LM, Ding WJ
537 - 541 Influence of poly(ethylene glycol) as pore-generator on morphology and performance of chitosan/poly(vinyl alcohol) membrane adsorbents
Salehi E, Madaeni SS
542 - 549 Surface modifications induced by pulsed-laser texturing-Influence of laser impact on the surface properties
Costil S, Lamraoui A, Langlade C, Heintz O, Oltra R
550 - 557 Craters and nanostructures with laser ablation of metal/metal alloy in air and liquid
Patel DN, Singh RP, Thareja RK
558 - 563 Facile fabrication of superhydrophobic Bi/Bi2O3 surfaces with hierarchical micro-nanostructures by electroless deposition or electrodeposition
Cao L, Lu XQ, Pu F, Yin XL, Xia Y, Huang W, Li ZL
564 - 571 Atomic scale insights into ethanol oxidation on Pt, Pd and Au metallic nanofilms: A DFT with van der Waals interactions
Pereira AO, Miranda CR
572 - 578 Pulsed laser deposition of piezoelectric ZnO thin films for bulk acoustic wave devices
Serhane R, Abdelli-Messaci S, Lafane S, Khales H, Aouimeur W, Hassein-Bey A, Boutkedjirt T
579 - 583 Superhydrophobic PDMS surfaces with three-dimensional (3D) pattern-dependent controllable adhesion
Yong JL, Yang Q, Chen F, Zhang DS, Du GQ, Bian H, Si JH, Yun F, Hou X
584 - 590 Structural and chemical transformations in the products of the interaction of silica gel with vapours of TiCl4 and H2O
Koshtyal YM, Malkov AA, Taulemesse JM, Petrov SN, Krasilin AA, Malygin AA
591 - 598 Theoretical and experimental analysis of electric contact surface hardening of ductile iron
Qi XB, Zhu SG, Ding H, Xu MK
599 - 603 Structural, optical and electrical characterization of ITO, ITO/Ag and ITO/Ni transparent conductive electrodes
Ali AH, Shuhaimi A, Hassan Z
604 - 608 Preparation of indium tin oxide anodes using energy filtrating technique for top-emitting organic light-emitting diode
Wang ZY, Yao N, Han CB, Hu X
609 - 618 First-principles investigations on the electronic properties and stabilities of low-index surfaces of L1(2)-Al3Sc intermetallic
Sun SP, Li XP, Wang HJ, Jiang HF, Lei WN, Jiang Y, Yi DQ
619 - 624 Fabrication of patterned surfaces that exhibit variable wettability ranging from superhydrophobicity to high hydrophilicity by laser irradiation
Lee C, Cho H, Kim D, Hwang W
625 - 632 Ultrasound assisted green synthesis of poly(vinyl alcohol) capped silver nanoparticles for the study of its antifilarial efficacy
Saha SK, Chowdhury P, Saini P, Babu SPS
633 - 640 Enhanced wet hydrogen peroxide catalytic oxidation performances based on CuS nanocrystals/reduced graphene oxide composites
Qian J, Wang K, Guan QM, Li HA, Xu H, Liu Q, Liu W, Qiu BJ
641 - 648 Magnetic nanoparticles with surfaces modified with chitosan-poly[N-benzyl-2-(methacryloxy)-N,N-dimethylethanaminium bromide] for lipase immobilization
Ziegler-Borowska M, Siodmiak T, Chelminiak D, Cyganiuk A, Marszall MP
649 - 653 Cell spreading on titanium dioxide film formed and modified with aerosol beam and femtosecond laser
Shinonaga T, Tsukamoto M, Nagai A, Yamashita K, Hanawa T, Matsushita N, Xie GQ, Abe N
654 - 659 Influence of anodization parameters on the volume expansion of anodic aluminum oxide formed in mixed solution of phosphoric and oxalic acids
Kao TT, Chang YC
660 - 665 Role of surfactant-mediated electrodeposited titanium oxide substrate in improving electrocatalytic features of supported platinum particles
Spataru T, Preda L, Osiceanu P, Munteanu C, Anastasescu M, Marcu M, Spataru N
666 - 672 Effects of carbon fiber surface characteristics on interfacial bonding of epoxy resin composite subjected to hygrothermal treatments
Li M, Liu HX, Gu YZ, Li YX, Zhang ZG
673 - 676 Decomposition of SnH4 molecules on metal and metal-oxide surfaces
Ugur D, Storm AJ, Verberk R, Brouwer JC, Sloof WG
677 - 681 Comparison of surface effects in SiO2 coated and uncoated nickel ferrite nanoparticles
Nadeem K, Krenn H, Sarwar W, Mumtaz M
682 - 689 Influence of silane surface modification of veneer on interfacial adhesion of wood-plastic plywood
Fang L, Chang L, Guo WJ, Chen YP, Wang Z
690 - 694 NH3 adsorption on the Lewis and Bronsted acid sites of MoO3 (010) surface: A cluster DFT study
Yan ZF, Fan JY, Zuo ZJ, Li Z, Zhang JS
695 - 701 X-ray photoelectron spectroscopy of Sm-doped layered perovskite for intermediate temperature-operating solid oxide fuel cell
Kim Y, Schlegl H, Kim K, Irvine JTS, Kim JH
702 - 709 Catalytic growth of carbon nanowires on composite diamond/silicon substrates
Sellam A, Miska P, Ghanbaja J, Barrat S
710 - 717 Acetate-intercalated Ni-In layered double hydroxides with low infrared emissivity: Synthesis, delamination and restacked to form the multilayer films
Wang YJ, Zhou YM, Zhang T, He M, Bu XH, Yang XM
718 - 726 In vitro degradation and biocompatibility of a strontium-containing micro-arc oxidation coating on the biodegradable ZK60 magnesium alloy
Lin X, Yang XM, Tan LL, Li M, Wang X, Zhang Y, Yang K, Hu ZQ, Qiu JH
727 - 735 The tribocorrosion behaviour of NiTi alloy
Kosec T, Mocnik P, Legat A
736 - 741 Nano-MoS2/poly (3,4-ethylenedioxythiophene): Poly(styrenesulfonate) composite prepared by a facial dip-coating process for Li-ion battery anode
Zhao XL, Mai YJ, Luo H, Tang DP, Lee B, Huang CU, Zhang LZ
742 - 746 Favorable binding effect for improving the electrochemical performance of cobalt oxide anode for lithium ion batteries
Wang WL, Nguyen VH, Gu HB