215 - 219 |
Synthesis and photoluminescent properties of poly(arylene ether)s containing oxadiazole and fluorene moieties Shang XY, Wang SJ, Ge XC, Xiao M, Meng YZ |
220 - 224 |
Atomic layer deposition of lanthana thin films using high-purity lanthanum amino precursors Inman R, Schuetz SA, Silvernail CM, Balaz S, Dowben PA, Jursich G, McAndrew J, Belot JA |
225 - 229 |
Preparation of textured Bi3TiNbO9 ceramics Zhou ZY, Cheng BZ, Li YC, Dong XF |
230 - 234 |
Preparation of silver quantum dots embedded water-soluble silica/PAAc hybrid nanoparticles and their bactericidal activity Jiang LZ, Wang WC, Wu DZ, Zhan JY, Wang Q, Wu ZP, Jin RG |
235 - 239 |
Characterization of W-20Cu ultrafine composite powder prepared by spray drying and calcining-continuous reduction technology Shi XL, Yang H, Wang S, Shao GQ, Duan XL, Xiong Z, Wang TG |
240 - 243 |
The electrical properties of graphite nanosheet filled immiscible polymer blends Chen GH, Lu JG, Wu DJ |
244 - 248 |
The influence of zigzag-curve defect on the fatigue properties of friction stir welds in 7075-T6 Al alloy Di SS, Yang XQ, Fang DP, Luan GH |
249 - 253 |
In situ synthesis of spherical BCP nanopowders by microwave asssisted process Lee YT, Youn MH, Paul RK, Lee KH, Song HY |
254 - 257 |
Studies on electrical and dielectric properties of Ba1-xSrxTiO3 Patil DR, Lokare SA, Devan RS, Chougule SS, Kanamadi CM, Kolekar Y, Chougule BK |
258 - 260 |
The effect of stoichimetry of VO2 nano-grain ceramics on their thermal and electrical properties Luo MN, Wei LY, Fu Q, Lei DM, Zheng C |
261 - 266 |
Effects of MgO coating on the sintering behavior and dielectric properties of BaTiO3 Park JS, Yang MH, Han YH |
267 - 270 |
Effects of grain refinement on the rheological behaviors of semisolid hypoeutectic Al-Si alloys Yan M, Luo W |
271 - 275 |
Improved electrochemical storage of lithium into multi-walled carbon nanotubes by light irradiation Huang H, Zhang WK, Gan XP |
276 - 283 |
Synthesis and characterization of silver nanoparticles in natural rubber Abu Bakar NHH, Ismail J, Abu Bakar M |
284 - 287 |
Novel porous polymer electrolyte based on polyacrylonitrile Wu G, Yang HY, Chen HZ, Yuan F, Yang LG, Wang M, Fu RJ |
288 - 292 |
Fabrication and characterization of YSZ/Ni-YSZ bi-layered composites using thermoplastic coextrusion Sun JJ, Choi WY, Kim HE, Koh YH |
293 - 300 |
A study of the galvanic corrosion behavior of Inconel 718 after electron beam welding Huang CA, Wang TH, Han WC, Lee CH |
301 - 305 |
Corrosion inhibition of iron in 20% hydrochloric acid by 1,4/1,6-bis(alpha-octylpyridinium)butane/hexane dibromide Yao SZ, Jiang XH, Zhou LM, Lv YJ, Hu XQ |
306 - 311 |
Preparation of transparent anodic through-thickness anodic alumina with ordered nanochannels by oxidation of aluminum sheet Mehmood M, Rauf A, Rasheed MA, Saeed S, Akhter JI, Ahmad J, Aslam M |
312 - 319 |
Bonding strength investigation of plasma-sprayed HA coatings on alumina substrate with porcelain intermediate layer Yang YC, Chou BY |
320 - 326 |
Controllable growth of nanostructured carbon from coal tar pitch by chemical vapor deposition Liu XG, Yang YZ, Ji WY, Liu HY, Zhang CY, Xu BS |
327 - 335 |
Applications of polyaniline doubly doped with p-toluene sulphonic acid and dichloroacetic acid as microwave absorbing and shielding materials Phang SW, Hino T, Abdullah MH, Kuramoto N |
336 - 341 |
More active PtRu/C catalyst for methanol electrooxidation by reversal of mixing sequence in catalyst preparation Zeng JH, Lee JY |
342 - 349 |
The optical and dielectric characterization of light-colored fluorinated polyimides based on 1,3-bis(4-amino-2-trifluoromethylphenoxy)benzene Jang WB, Lee HS, Lee SY, Choi SH, Shin DY, Han HS |
350 - 355 |
Thermally induced interfacial interactions between. various metal substrates and a-SiC thin films deposited by a polymer-source chemical vapor deposition Awad Y, Khakani MA, Aktik C, Mouine J, Camire N, Lessard M, Scarlete M |
356 - 361 |
Evaluation of corrosion resistance of Portland pozzolana cement and fly ash blended cements in pre-cracked reinforced concrete slabs under accelerated testing conditions Saraswathy V, Song HW |
362 - 366 |
Large-scale in situ synthesis and characterization of ternary single-crystal NaV6O15 nanoneedles Yu JG, Yu JC |
367 - 372 |
In situ synthesis of silver nano-particles in polymethylmethacrylate Singh N, Khanna PK |
373 - 376 |
Effects of Mg content on the crystal structures and hydrogenation behavior of (Ca1-xMgx)Al(2)alloys Zhang QA, Zhao GP |
377 - 383 |
Preparation and photocatalytic activity of dysprosium doped tungsten trioxide nanoparticles Liu HJ, Peng TY, Ke DN, Peng ZH, Yan CH |
384 - 389 |
Monitoring of crystallization processes during synthesis of zeolite A by in situ (27)A1 NMR spectroscopy Miladinovic Z, Zakrzewska J, Kovacevic B, Bacic G |
390 - 396 |
Micromorphology, photophysical and electrical properties of pristine an ferric chloride dope poly(3-hexylthiophene) films Singh RK, Kumar J, Singh R, Kant R, Chand S, Kumar V |
397 - 402 |
Microwave dielectric properties and co-firing of BiNbO4 ceramics with CuO substitution Zhou D, Wang H, Yao X |
403 - 409 |
A low temperature barium-based ceramic oxide battery materials for high voltage lithium secondary cells Sathiyamoorthi R, Shakkthivel P, Gangadharan R, Vasudevan T |
410 - 416 |
Electrochromic properties of a soluble conducting polymer: Poly(1-(4-fluorophenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole) Arslan A, Turkarslan O, Tanyeli C, Akhmedov IM, Toppare L |
417 - 421 |
Silver nanoparticles: New synthesis, characterization and photophysical properties Balan L, Malval JP, Schneider R, Burget D |
422 - 428 |
Protection of mild steel against corrosion by polynitroaniline films Sachin HP, Achary G, Naik YA, Venkatesha TV |
429 - 433 |
Facile synthesis of single crystalline alpha-Fe2O3 ellipsoidal nanoparticles and its catalytic performance for removal of carbon monoxide Hu CQ, Gao ZH, Yang XR |
434 - 438 |
Development of amorphous phase dispersed Al-rich composites by rolling of mechanically alloyed amorphous Al-Ni-Ti powders with pure Al Samanta A, Fecht HJ, Manna I, Chattopadhyay PP |
439 - 443 |
Rapid formation of nanocrystalline HfO2 powders from amorphous hafnium hydroxide under ultrasonically assisted hydrothermal treatment Meskin PE, Sharikov FY, Ivanov VK, Churagulov BR, Tretyakov YD |
444 - 447 |
Synthesis and electrochemical performance of Si/Cu and Si/Cu/graphite composite anode Zuo PJ, Yin GP, Hao XF, Yang ZL, Ma YL, Gao ZG |
448 - 453 |
Mesoporous hydroxyapatites prepared in ethanol-water media: Structure and surface properties El Hammari L, Merroun H, Coradin T, Cassaignon S, Laghzizil A, Saoiabia A |
454 - 459 |
Sol-gel preparation and characterization of nanosize TiO2: Its photocatalytic performance Venkatachalam N, Palanichamy M, Murugesan V |
460 - 471 |
Porosity, crystal phase, and morphology of nanoparticle derived alumina as a function of the nanoparticle's carboxylate substituent Jones CD, Barron AR |
472 - 478 |
Wetting and sealing of interface between 7056 Glass and Kovar alloy Chern TS, Tsai HL |
479 - 482 |
Synthesis and characterization of Cr-doped LiMn2-xCrxO4 (x=0.1-0.4) cathode for Li-ion battery Suryakala K, Kalaignan GP, Vasudevan T |
483 - 487 |
A simple method for chemical bath deposition of electrochromic tungsten oxide films Najdoski MZ, Todorovski T |
488 - 496 |
Monodomain liquid crystal elastomers and elastomeric gels: Improved thermomechanical responses and phase behaviour by addition of low molecular weight LCs Brown DH, Das V, Allen RWK, Styring P |
497 - 504 |
Oxide films on magnesium and magnesium alloys Shih TS, Liu JB, Wei PS |