1 - 7 |
Controlled oxidation of aluminum nanoparticles Litrico G, Proulx P, Gouriet JB, Rambaud P |
8 - 13 |
Visible light photocatalytic activities of carbon nanotube/titanic acid nanotubes derived-TiO2 composites for the degradation of methylene blue Liu XG, Wang XD, Xing X, Li QY, Yang JJ |
14 - 23 |
Cluster structure-dependent drag model for liquid-solid circulating fluidized bed Liu GD, Wang P, Yu F, Zhang YN, Guo WT, Lu HL |
24 - 30 |
Geopolymerisation behaviour of size fractioned fly ash Kumar S, Kristaly F, Mucsi G |
31 - 41 |
Studies on the effect of electrode plate position and feed temperature on the tribo-electrostatic separation of high ash Indian coking coal Dwari RK, Mohanta SK, Rout B, Soni RK, Reddy PSR, Mishra BK |
42 - 48 |
Microscale gap breakdown induced by toner triboelectrification Hasegawa T, Komori C, Matsuyama T |
49 - 55 |
A statistical model of pressure drop increase with deposition in granular filters Qin ZH, Pletcher RH |
56 - 65 |
A method for calculating the surface area of numerically simulated aggregates Peng ZB, Doroodchi E, Sathe M, Joshi JB, Evans GM, Moghtaderi B |
66 - 72 |
Experimental investigation of the sphericity of irregularly shaped oil shale particle groups Pan LW, Dai FQ, Tian YQ, Zhang FH |
73 - 82 |
A comparative study on hot dynamic compaction and quasi-static hot pressing of Al7075/SiCnp nanocomposite Atrian A, Majzoobi GH, Enayati MH, Bakhtiari H |
83 - 90 |
Investigating the effect of Brownian motion and viscous dissipation on the nanofluid heat transfer in a trapezoidal microchannel heat sink Fani B, Kalteh M, Abbassi A |
91 - 97 |
Preparation of sub-micrometer lead wires from PbO by electrodeposition in choline chloride-urea deep eutectic solvent Ru JJ, Hua YX, Xu CY, Li J, Li Y, Wang D, Gong K |
98 - 104 |
Synthesis of Na-A zeolite from coal gangue with the in-situ crystallization technique Qian TT, Li JH |
105 - 112 |
Analytical solutions of the particle breakage equation by the Adomian decomposition and the variational iteration methods Hasseine A, Barhoum Z, Attarakih M, Bart HJ |
113 - 118 |
Structural and optical properties of (K,Na)NbO3 nanoparticles synthesized by a modified sol-gel method using starch media Khorrami GH, Kompany A, Zak AK |
119 - 125 |
Upgrading of positively buoyant particles using an Inverted Reflux Classifier Kiani A, Zhou J, Galvin KP |
126 - 138 |
Reduction and densification characteristics of iron oxide metallic waste during solid state recycling Rane KK, Date PP |
139 - 148 |
Microstructural observation, consolidation and mechanical behaviour of AA 6061 nanocomposites reinforced by gamma-Al2O3 nanoparticles Jeyasimman D, Sivaprasad K, Sivasankaran S, Ponalagusamy R, Narayanasamy R, Iyer V |
149 - 155 |
Adhesive strength distribution of charged particles on metal substrate in external electric field Matsusaka S, Wei D, Yasuda M, Sasabe S |
156 - 162 |
A side-by-side capillaries-based microfluidic system for synthesizing size- and morphology-controlled magnetic anisotropy janus beads Yang YT, Wei J, Li X, Wu LJ, Chang ZQ, Serra CA |
163 - 168 |
Silicon rich oxide powders by HWCVD: Its optical and morphological properties Benitez-Lara A, Garcia-Salgado G, Vazquez-Valerdi DE, Morales-Sanchez A, Espinosa-Torres ND, Luna-Lopez JA |
169 - 174 |
Formation of face-centered cubic and tetragonal titanium oxynitride by low temperature annealing of ball milled titanium powder in air Bolokang AS, Motaung DE, Arendse CJ, Muller TFG |
175 - 179 |
Synthesis of nano-sized spinel (MgAl2O4) from short mechanochemically activated chloride precursors and its sintering behavior Abdi MS, Ebadzadeh T, Ghaffari A, Feli M |
180 - 187 |
Effect of Morse potential as model of solid-solid inter-atomic interaction on the thermal conductivity of nanofluids Loulijat H, Zerradi H, Dezairi A, Ouaskit S, Mizani S, Rhayt F |
188 - 192 |
Role of crystal growth modifiers in the synthesis of ZSM-12 zeolite Sanhoob MA, Muraza O, Al-Mutairi EM, Ullah N |
193 - 199 |
Effects of Cu and Ag nano-particles on flow and heat transfer from permeable surfaces Hajmohammadi MR, Maleki H, Lorenzini G, Nourazar SS |
200 - 207 |
Particle size analysis on wide size distribution powders; effect of sampling and characterization technique Basim GB, Khalili M |
208 - 212 |
Fabrication of the Bi0.5Sb1.5Te3 thermoelectric material by fusion-mechanical milling and spark plasma sintering Lee GG, Ha GH |
213 - 223 |
Structural and magnetic properties of nanocrystalline yttrium substituted cobalt ferrite synthesized by the citrate precursor technique Kumari S, Kumar V, Kumar P, Kar M, Kumar L |
224 - 235 |
Effects of nanoparticles diameter and concentration on natural convection of the Al2O3-water nanofluids considering variable thermal conductivity around a vertical cone in porous media Ghalambaz M, Behseresht A, Behseresht J, Chamkha A |
236 - 243 |
Model for induced airflow velocity of falling materials in semi-closed transfer station based on similitude theory Li XC, Li Q, Zhang D, Jia BB, Luo HQ, Hu YF |
244 - 252 |
The impact of preparation parameters on sustained release aceclofenac microspheres: A design of experiments Deshmukh RK, Naik JB |
253 - 258 |
Mechanical properties of Al-Mg/Al2O3 nanocomposite powder produced by mechanical alloying Wagih A |
259 - 266 |
A kinetic study on the mechanism of hydrogen evolution in Ni-P coated titanium hydride powder Azarniya A, Salatin F, Eskandaripoor MR, Rasooli A |
267 - 274 |
Application of residual brewery yeast for adsorption removal of Reactive Orange 16 from aqueous solution Kim TY, Lee JW, Cho SY |
275 - 279 |
Synthesis and properties of Cu-2(FexZn1-x)SnS4 nanocrystals by microwave irradiation assisted solvothermal method Wang W, Shen HL, Chen JY, Chen WL, He XC |
280 - 295 |
Collision behaviour of a smaller particle into a larger stationary droplet Mitra S, Doroodchi E, Pareek V, Joshi JB, Evans GM |
296 - 302 |
Synthesis of layered nanostructured TiO2 by hydrothermal method Tan ZQ, Sato K, Ohara S |
303 - 308 |
A screw-brush feeding system for uniform fine zinc oxide powder feeding and obtaining a homogeneous gas-particle flow Dalenjan MB, Jamshidi E, Ebrahim HA |
309 - 314 |
The effect of seeding on the phase separation phenomenon in a solidifying molten drop Abouzeid A, Petersen S, Ulrich J |
315 - 322 |
A quantitative study of the effect of process parameters on key granule characteristics in a high shear wet granulation process involving a two component pharmaceutical blend Oka S, Kaspar O, Tokarova V, Sowrirajan K, Wu HQ, Khan M, Muzzio F, Stepanek F, Ramachandran R |
323 - 328 |
Structural and magnetic characteristics of Co-based amorphous powders prepared by wet mechanical alloying Neamtu BV, Marinca TF, Chicinas I, Isnard O, Popa F |
329 - 334 |
Effect of electrostatics on interaction of bubble pairs in a fluidized bed Jalalinejad F, Bi XTT, Grace JR |
335 - 335 |
Nano-sized cube-shaped single crystalline oxides and their potentials; composition, assembly and functions (vol 25, pg 1401, 2014) Kato K, Dang F, Mimura K, Kinemuchi Y, Imai H, Wada S, Osada M, Haneda H, Kuwabara M |