화학공학소재연구정보센터

Solar Energy Materials and Solar Cells

Solar Energy Materials and Solar Cells, Vol.120 Entire volume, number list
ISSN: 0927-0248 (Print) 

In this Issue (102 articles)

1 - 8 2-D mathematical modeling for a large electrochromic window-Part I
Liu Y, Sun LZ, Sikha G, Isidorsson J, Lim S, Anders A, Kwak BL, Gordon JG
9 - 17 A projection of commercial-scale organic photovoltaic module costs
Mulligan CJ, Wilson M, Bryant G, Vaughan B, Zhou XJ, Belcher WJ, Dastoor PC
18 - 22 ITO distributed Bragg reflectors fabricated at low temperature for light-trapping in thin-film solar cells
Tien WC, Chu AK
23 - 29 A novel non-selective coating material for solar thermal potential application formed by reaction between sol-gel titania and copper manganese spinel
Tulchinsky D, Uvarov V, Popov I, Mandler D, Magdassi S
30 - 36 Material solubility effects in bulk heterojunction solar cells based on the bis-cyclopropane fullerene adducts and P3HT
Susarova DK, Goryachev AE, Novikov DV, Dremova NN, Peregudova SM, Razumov VF, Troshin PA
37 - 47 Triple bulk heterojunctions as means for recovering the microstructure of photoactive layers in organic solar cell devices
Kan ZP, Colella L, Canesi EV, Lerario G, Kumar RSS, Bonometti V, Mussini PR, Cavallo G, Terraneo G, Pattanasattayavong P, Anthopoulos TD, Bertarelli C, Keivanidis PE
48 - 58 3-D modeling of perimeter recombination in GaAs diodes and its influence on concentrator solar cells
Ochoa M, Algora C, Espinet-Gonzalez P, Garcia I
59 - 80 Energy storage: Applications and challenges
Kousksou T, Bruel P, Jamil A, El Rhafiki T, Zeraouli Y
81 - 86 Speed up dye-sensitized solar cell fabrication by rapid dye solution droplets bombardment
Kuo HP, Wu CT
87 - 93 Environmental mechanisms of debonding in photovoltaic backsheets
Novoa FD, Miller DC, Dauskardt RH
94 - 101 Enhanced photocurrent generation by high molecular weight random copolymer consisting of benzothiadiazole and quinoxaline as donor materials
Kim DH, Song HJ, Heo SW, Song KW, Moon DK
102 - 108 The influence of oxygen on the microstructural, optical and photochromic properties of polymer-matrix, tungsten-oxide nanocomposite films
DeJournett TJ, Spicer JB
109 - 115 Electrochromic behavior of NiO thin films deposited by e-beam evaporation at room temperature
Pereira S, Goncalves A, Correia N, Pinto J, Pereira L, Martins R, Fortunato E
116 - 130 Comparison of electrochromic properties of Ni1-xO in lithium and lithium-free aprotic electrolytes: From Ni1-xO pigment coatings to flexible electrochromic devices
Mihelcic M, Vuk AS, Jerman I, Orel B, Svegl F, Moulki H, Faure C, Campet G, Rougier A
131 - 135 Investigation into the effect of post-annealing on inverted polymer solar cells
Kang R, Oh SH, Na SI, Kim TS, Kim DY
136 - 142 Interplay between annealing temperature and optimum composition and fullerene aggregation effects in bulk heterojunction photocells based on poly(3-hexylthiophene) and unmodified C-60
Tada K
143 - 150 Silicon oxide buffer layer at the p-i interface in amorphous and microcrystalline silicon solar cells
Bugnon G, Parascandolo G, Hanni S, Stuckelberger M, Charriere M, Despeisse M, Meillaud F, Ballif C
151 - 156 Electrochromic iridium oxide films: Compatibility with propionic acid, potassium hydroxide, and lithium perchlorate in propylene carbonate
Wen RT, Niklasson GA, Granqvist CG
157 - 162 A new investigation of oxygen flow influence on ITO thin films by magnetron sputtering
Chen A, Zhu KG, Zhong HC, Shao QY, Ge GL
163 - 167 Polymer solar cells with electrodeposited CuSCN nanowires as new efficient hole transporting layer
Chappaz-Gillot C, Berson S, Salazar R, Lechene B, Aldakov D, Delaye V, Guillerez S, Ivanova V
168 - 174 Efficiency improvement of Si solar cells using metal-enhanced nanophosphor fluorescence
Chen JY, Huang CK, Hung WB, Sun KW, Chen TM
175 - 182 Hybrid sol-gel layers containing CeO2 nanoparticles as UV-protection of plastic lenses for concentrated photovoltaics
Aklalouch M, Calleja A, Granados X, Ricart S, Boffa V, Ricci F, Puig T, Obradors X
183 - 190 Optical study of a solar concentrator for space applications based on a diffractive/refractive optical combination
Michel C, Loicq J, Languy F, Habraken S
191 - 196 A study on the variation of c-Si solar cell parameters under 8 MeV electron irradiation
Bhat PS, Rao A, Krishnan S, Sanjeev G, Puthanveettil SE
197 - 203 Simultaneous enhancement in both large-area coatability and photovoltaic performance of inverted organic solar cells with co-solvent
Hong YR, Chen PK, Wang JC, Lee MK, Horng SF, Meng HF
204 - 208 Excellent surface passivation of heavily doped p(+) silicon by low-temperature plasma-deposited SiOx/SiNy dielectric stacks with optimised antireflective performance for solar cell application
Duttagupta S, Ma FJ, Hoex B, Aberle AG
209 - 217 Synthesis and photovoltaic characteristics of push-pull organic semiconductors containing an electron-rich dithienosilole bridge for solution-processed small-molecule organic solar cells
Paek S, Lee JK, Ko J
218 - 225 Mechanistic aspects of preheating effects of electrodeposited metallic precursors on structural and photovoltaic properties of Cu(2)Zn(5)nS(4) thin films
Lin YX, Ikeda S, Septina W, Kawasaki Y, Harada T, Matsumura M
226 - 230 Cost-effective ITO-free organic solar cells with silver nanowire-PEDOT: PSS composite electrodes via a one-step spray deposition method
Noh YJ, Kim SS, Kim TW, Na SI
231 - 237 Hybrid bulk-heterojunction solar cells based on all inorganic nanoparticles
Tan FR, Qu SC, Yu P, Li FM, Chen C, Zhang WF, Wang ZG
238 - 243 Organic photovoltaic with PEDOT:PSS and V2O5 mixture as hole transport layer
Lee SJ, Kim HP, Yusoff ARBM, Jang J
244 - 252 Effect of light induced degradation on electrical transport and charge extraction in polythiophene:Fullerene (P3HT:PCBM) solar cells
Khelifi S, Voroshazi E, Spoltore D, Piersimoni F, Bertho S, Aernouts T, Manca J, Lauwaert J, Vrielinck H, Burgelman M
253 - 258 Fabricating highly efficient Cu(In,Ga)Se-2 solar cells at low glass-substrate temperature by active gallium grading control
Zhang K, Yang CL, Yin L, Liu Z, Song QM, Luo HL, Xiong ZY, Xu MM, Xiao XD
259 - 269 Prediction of silicon PV module temperature for hot spots and worst case partial shading situations using spatially resolved lock-in thermography
Geisemeyer I, Fertig F, Warta W, Rein S, Schubert MC
270 - 274 Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics
Feldmann F, Bivour M, Reichel C, Hermle M, Glunz SW
275 - 281 On the origin and formation of large defect clusters in multicrystalline silicon solar cells
Kohler D, Zuschlag A, Hahn G
282 - 288 Short-circuit current density mapping for solar cells
Padilla M, Michl B, Thaidigsmann B, Warta W, Schubert MC
289 - 294 Characterization of defects in mono-like silicon wafers and their effects on solar cell efficiency
Gong LF, Wang FZ, Cai Q, You D, Dai B
295 - 302 Hierarchical porous titania/carbon nanotube nanocomposite photoanode synthesized by controlled phase separation for dye sensitized solar cell
Golobostanfard MR, Abdizadeh H
303 - 309 Effect of replacing proton with alkoxy side chain for donor acceptor type organic photovoltaics
Song KW, Choi MH, Song HJ, Heo SW, Lee JY, Moon DK
310 - 310 Proceedings of the 3rd international conference on crystalline silicon photovoltaics (SiliconPV 2013)
Brendel R
311 - 316 The interface of a-SiNx:H and Si: Linking the nano-scale structure to passivation quality
Lamers M, Hintzsche LE, Butler KT, Vullum PE, Fang CM, Marsman M, Jordan G, Harding JH, Kresse G, Weeber A
317 - 322 Non-linear absorption of femtosecond laser pulses in a SiNx layer-influence of silicon doping type
Heinrich G, Lawerenz A
323 - 331 Micro characterization of laser structured solar cells with plated Ni-Ag contacts
Kluska S, Fleischmann C, Buchler A, Hordt W, Geisler C, Hopman S, Glatthaar M
332 - 338 Zincate processes for silicon solar cell metallization
Kamp M, Bartsch J, Cimiotti G, Keding R, Zogaj A, Reichel C, Kalio A, Glatthaar M, Glunz S
339 - 345 Thermal stability of silicon surface passivation by APCVD Al2O3
Black LE, Allen T, Cuevas A, McIntosh KR, Veith B, Schmidt J
346 - 355 Loss of wire tension in the wire web during the slurry based multi wire sawing process
Meissner D, Schoenfelder S, Hurka B, Zeh J, Sunder K, Koepge R, Wagner T, Grun A, Hagel HJ, Moeller HJ, Schwabe H, Anspach O
356 - 362 Analysis of recombination losses in screen-printed aluminum-alloyed back surface fields of silicon solar cells by numerical device simulation
Chen YF, Shen H, Altermatt PP
363 - 375 Surface recombination parameters of interdigitated-back-contact silicon solar cells obtained by modeling luminescence images
Padilla M, Hoffler H, Reichel C, Chu H, Greulich J, Rein S, Warta W, Hermle M, Schubert MC
376 - 382 Metal-oxide-based hole-selective tunneling contacts for crystalline silicon solar cells
Smit S, Garcia-Alonso D, Bordihn S, Hanssen MS, Kessels WMM
383 - 389 Explanation of potential-induced degradation of the shunting type by Na decoration of stacking faults in Si solar cells
Naumann V, Lausch D, Hahnel A, Bauer J, Breitenstein O, Graff A, Werner M, Swatek S, Grosser S, Bagdahn J, Hagendorf C
390 - 395 Impact of compensation on the boron and oxygen-related degradation of upgraded metallurgical-grade silicon solar cells
Forster M, Wagner P, Degoulange J, Einhaus R, Galbiati G, Rougieux FE, Cuevas A, Fourmond E
396 - 401 Qualification of encapsulation materials for module-level-processing
Steckenreiter V, Horbelt R, Wright DN, Nese M, Brendel R
402 - 411 Minority carrier lifetime in silicon photovoltaics: The effect of oxygen precipitation
Murphy JD, McGuire RE, Bothe K, Voronkov VV, Falster RJ
412 - 416 Analysis of a-Si:H/TCO contact resistance for the Si heterojunction back-contact solar cell
Lee SY, Choi H, Li H, Ji K, Nam S, Choi J, Ahn SW, Lee HM, Park B
417 - 425 Industrial high performance crystalline silicon solar cells and modules based on rear surface passivation technology
Metz A, Adler D, Bagus S, Blanke H, Bothar M, Brouwer E, Dauwe S, Dressler K, Droessler R, Droste T, Fiedler M, Gassenbauer Y, Grahl T, Hermert N, Kuzminski W, Lachowicz A, Lauinger T, Lenck N, Manole M, Martini M, Messmer R, Meyer C, Moschner J, Ramspeck K, Roth P, Schonfelder R, Schum B, Sticksel J, Vaas K, Volk M, Wangemann K
426 - 430 Parasitic absorption in the rear reflector of a silicon solar cell: Simulation and measurement of the sub-bandgap reflectance for common dielectric/metal reflectors
Holman ZC, Filipic M, Lipovsek B, De Wolf S, Smole F, Topic M, Ballif C
431 - 435 Evaluation of implantation annealing for highly-doped selective boron emitters suitable for screen-printed contacts
Muller R, Benick J, Bateman N, Schon J, Reichel C, Richter A, Hermle M, Glunz SW
436 - 440 Injection dependence of the effective lifetime of n-type Si passivated by Al2O3: An edge effect?
Veith B, Ohrdes T, Werner F, Brendel R, Altermatt PP, Harder NP, Schmidt J
441 - 447 Modeling and testing the mechanical strength of solar cells
Kaule F, Wang W, Schoenfelder S
449 - 453 ITO-free laminated concept for flexible organic solar cells
Kaduwal D, Zimmermann B, Wurfel U
454 - 461 Development of Cu2S/carbon composite electrode for CdS/CdSe quantum dot sensitized solar cell modules
Li DM, Cheng LY, Zhang YD, Zhang QX, Huang XM, Luo YH, Meng QB
462 - 472 Influence of microstructure on temperature-induced ageing mechanisms of different solar absorber coatings
Kotilainen M, Mizohata K, Honkanen M, Vuoristo P
473 - 480 Thermal stability of electron beam evaporated AlxOy/Pt/AlxOy multilayer solar absorber coatings
Nuru ZY, Arendse CJ, Muller TF, Khamlich S, Maaza M
481 - 490 Effects of fabricated technology on particle size distribution and thermal properties of stearic-eicosanoic acid/polymethylmethacrylate nanocapsules
Wang Y, Zhang Y, Xia TD, Zhao WJ, Yang WH
491 - 499 Outdoor ageing of the dye-sensitized solar cell under different operation regimes
Berginc M, Krasovec UO, Topic M
500 - 505 Effect of chemical treatments on nm-scale electrical characteristics of polycrystalline thin film Cu(In,Ga)Se-2 surfaces
Li WJ, Cohen SR, Cahen D
506 - 511 Breakdown characteristics of flexible Cu(In,Ga)Se-2 solar cells
Puttnins S, Jander S, Wehrmann A, Benndorf G, Stolzel M, Muller A, von Wenckstern H, Daume F, Rahm A, Grundmann M
512 - 520 Current-voltage characteristics and quantum efficiency spectra of efficient thin-film CdS/CdTe solar cells
Kosyachenko L, Toyama T
521 - 525 Efficiency and stability enhancement of laser-crystallized polycrystalline silicon thin-film solar cells by laser firing of the absorber contacts
Weizman M, Rhein H, Dore J, Gall S, Klimm C, Andra G, Schultz C, Fink F, Rau B, Schlatmann R
526 - 535 Probing the annealing induced molecular ordering in bulk heterojunction polymer solar cells using in-situ Raman spectroscopy
Veerender P, Saxena V, Chauhan AK, Koiry SP, Jha P, Gusain A, Choudhury S, Aswal DK, Gupta SK
536 - 542 Microencapsulation of caprylic acid with different wall materials as phase change material for thermal energy storage
Konuklu Y, Unal M, Paksoy HO
543 - 548 Study on the degradation of different types of backsheets used in PV module under accelerated conditions
Kim N, Kang H, Hwang KJ, Han C, Hong WS, Kim D, Lyu E, Kim H
549 - 554 Bio-based PCM/carbon nanomaterials composites with enhanced thermal conductivity
Yu S, Jeong SG, Chung O, Kim S
555 - 560 Nanostructured encapsulation coverglasses with wide-angle broadband antireflection and self-cleaning properties for III-V multi-junction solar cell applications
Leem JW, Yu JS, Heo J, Park WK, Park JH, Cho WJ, Kim DE
561 - 565 High-density organic photovoltaic modules: Mask-free fabrication using nozzle jet printing and oblique deposition
Kim H, Lee S, Han D, Yoo S
566 - 571 Efficiency improvement of organic solar cells with imprint of nanostructures by capillary force lithography
Cheng YS, Gau C
572 - 583 Computational comparison of conventional and inverted organic photovoltaic performance parameters with varying metal electrode surface workfunction
Petoukhoff CE, Vijapurapu DK, O'Carroll DM
584 - 590 Direct effect of partially photooxidized poly(3-hexylthiophene) on the device characteristics of a bulk heterojunction solar cell
Aoyama Y, Yamanari T, Ohashi N, Shibata Y, Suzuki Y, Mizukado J, Suda H, Yoshida Y
591 - 595 Plasmonic-enhanced Si Schottky barrier solar cells
Tong C, Yun JY, Song HM, Gan QQ, Anderson WA
596 - 602 Phase formation in Cu2ZnSnSe4 thin films deposited with multi-stage co-evaporation processes
Kaune G, Hartnauer S, Syrowatka F, Scheer R
603 - 609 Preparation and characterization of MoO3 hole-injection layer for organic solar cell fabrication and optimization
Wang GJ, Jiu TG, Li PD, Li J, Sun CM, Lu FS, Fang JF
610 - 615 Spectral sensitivity of hot carrier solar cells
Hirst LC, Lumb MP, Hoheisel R, Bailey CG, Philipps SP, Bett AW, Walters RJ
616 - 621 Optical modelling of the external quantum efficiency of solar cells with luminescent down-shifting layers
Rothemund R
622 - 630 Surface passivation effects on the electronic and optical properties of silicon quantum dots
Laref A, Alshammari N, Laref S, Luo SJ
631 - 634 Pd distribution of switchable mirrors based on Mg-Y alloy thin films
Yamada Y, Miura M, Tajima K, Okada M, Yoshimura K
635 - 641 The influence of perpendicular transport behavior on the properties of n-i-p type amorphous silicon solar cells
Ma J, Ni J, Zhang JJ, Liu Q, Hou GF, Chen XL, Zhang XD, Geng XH, Zhao Y
642 - 646 Current-voltage characteristics of fully solution processed high performance CuIn(S,Se)(2) solar cells: Crossover and red kink
Chung CH, Bo B, Song TB, Yang Y
647 - 653 Energy-band barrier to improve open-circuit voltage of CdTe solar cells
Hsiao KJ
654 - 668 Multiple stress degradation analysis of the active layer in organic photovoltaics
Turkovic V, Engmann S, Egbe DAM, Himmerlich M, Krischok S, Gobsch G, Hoppe H
669 - 674 Smart or not? A theoretical discussion on the smart regulation capacity of vanadium dioxide glazing
Ye H, Long LS
675 - 684 Inter-diffused ordered bulk heterojunction organic photovoltaics: optimized morphology for efficient exciton dissociation and charge transport
Jung B, Kim K, Kim J, Kim S, Kim E, Kim W
685 - 690 Water ingress into and climate dependent lifetime of organic photovoltaic cells investigated by calcium corrosion tests
Klumbies H, Karl M, Hermenau M, Rosch R, Seeland M, Hoppe H, Muller-Meskamp L, Leo K
691 - 691 Editorial for the special issue dedicated to tandem solar cells based on organic and polymer materials
Krebs FC
692 - 700 Life cycle analysis of organic tandem solar cells: When are they warranted?
Espinosa N, Krebs FC
701 - 708 Towards large-scale production of solution-processed organic tandem modules based on ternary composites: Design of the intermediate layer, device optimization and laser based module processing
Li N, Kubis P, Forberich K, Ameri T, Krebs FC, Brabec CJ
709 - 715 Design of intermediate layers for solution-processed tandem organic solar cells: Guidelines from a case study on TiOx and ZnO
Lechene B, Perrier G, Emmanouil K, Kennou S, Bouthinon B, de Bettignies R
716 - 723 Prospects of layer-split tandem cells for high-efficiency OPV
Khan MR, Ray B, Alam MA
724 - 727 Organic solar cells comprising multiple-device stacked structures exhibiting complementary absorption behavior
Lin WT, Lin YT, Chou CH, Chen FC, Hsu CS
728 - 734 Large active area inverted tandem polymer solar cell with high performance via insertion of subnano-scale silver layer
Yeh PN, Jen TH, Cheng YS, Chen SA
735 - 743 A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers
Andersen TR, Dam HE, Andreasen B, Hosel M, Madsen MV, Gevorgyan SA, Sondergaard RR, Jorgensen M, Krebs FC
744 - 750 High-efficiency inverted tandem polymer solar cells with step-Al-doped MoO3 interconnection layer
Liu J, Shao SY, Fang G, Wang JT, Meng B, Xie ZY, Wang LX