353 - 363 |
화학반응을 고려한 스토커식 소각로의 3차원 모사연구 Three-Dimensional Simulation of the Stoker-type Incinerator Considering Chemical Reactions 권순우, 이종협 Kwon SW, Yi JH |
364 - 368 |
티타니아 담지 MCM-41 및 KIT-1 메조포러스 물질의 수열 안정성 및 흡착성질 Hydrothermal Stabilities and Adsorption Properties of Titania Loaded on MCM-41 and KIT-1 Mesoporous Materials 강태구, 김종호, 서곤, 박흥철 Kang TG, Kim JH, Seo G, Park HC |
369 - 374 |
상압에서 합성된 ZSM-5의 물리 화학적 특성 및 프로펜의 전환반응 Physico-Chemical Characteristics of the ZSM-5 Crystallized at Atmospheric Pressure and Conversion of Propene on the ZSM-5 박진우, 함현식, 김조웅, 하재목, 정택서, 박현영 Park JW, Hahm HS, Kim JW, Ha JM, Jeong TS, Park HY |
375 - 379 |
Pd/C촉매에 의한 2-nitro-2'-hydroxy-5'-methyl azobenzene의 액상 환원반응 특성 Characteristics of the Liquid Phase Reduction of 2-Nitro-2’-Hydroxy-5’-Methyl Azobenzene over Pd/C Catalysts 최주홍, 이정원, 김수권 Choi JH, Lee JW, Kim SK |
380 - 386 |
체단탑에서의 이성분계 혼합물의 거품발생현상에 관한 해석 Analysis of Foaming Phenomena of Binary Mixtures in Sieve Plate Columns 윤호병, 홍원희, 이태용, 김창식, 송익수 Yoon HB, Hong WH, Lee TY, Kim CS, Song IS |
387 - 392 |
활성탄소섬유를 이용한 고분자 전해질형 연료전지 전극의 제조 Fabrication of the Electrode for Proton Exchange Membrane Fuel Cell by Using Activated Carbon Fiber 신창섭, 이경덕, 이승재, 이태희 Shin CS, Lee KD, Lee SJ, Lee TH |
393 - 398 |
계면중합 반응 고찰 및 박막의 두께측정에 관한 연구 Reaction Mechanism and Thickness of Thin Film in Interfacial Polymerization 박종원, 진병복, 민병렬 Pak JW, Jin BB, Min BR |
399 - 406 |
레졸형 페놀수지의 경화 속도가 가교 밀도 및 기계적 물성에 미치는 영향 Effect of Curing Kinetics on the Cross-link Density and Mechanical Property of Resol Type of Phenolic Resin 최민호, 정인재 Choi MH, Chung IJ |
407 - 414 |
셀-튜브형태의 막모듈을 이용한 중금속 제거공정 모사연구 Performance Estimation of Tubular Supported Liquid Membrane for Heavy Metal Removal Processes 윤병훈, 김정후, 이종협 Yoon BH, Kim CH, Yi J |
415 - 421 |
계층적 방법에 의한 유틸리티 플랜트 조업 최적화 Optimization of a Utility Plant Operation Based on a Hierarchical Method 이성제, 이무호, 장근수, 한종훈 Lee SJ, Lee MH, Chang KS, Han C |
422 - 428 |
Multi-period 조업을 고려한 유틸리티 플랜트의 최적화 Optimization of A Utility Plant for Multi-period Operations 이성제, 이무호, 장근수, 한종훈 Lee SJ, Lee MH, Chang KS, Han C |
429 - 433 |
BiOCl이 첨가된 Li2CO3-Sm2O3 촉매상에서 메탄의 Oxidative Coupling 반응 Oxidative Coupling of Methane over BiOCl-Li2CO3-Sm2O3 Catalyst 백성현, 정진석, 이화영 Baeck SH, Chung JS, Lee WY |
434 - 437 |
Polycarbosilane 전구체가 탄소섬유/SiC 복합재료의 물성에 미치는 영향 The Effects of Polycarbosilane Precursor on the Properties of Carbon-Fiber/SiC Composites 김진구, 이명천, 김홍범 Kim JG, Lee MC, Kim HB |
438 - 446 |
삼성분 혼합물 증류에서의 이성분계 단효율 값을 이용한 각 단 평균농도 예측 Prediction of Average Concentration of Each Plate using Binary Plate Efficiency Data in Ternary Mixture Distillation 이진영, 홍원희, 김창식, 송익수 Lee JY, Hong WH, Kim CS, Song IS |
447 - 452 |
H-beta 제올라이트에서 폴리에틸렌 왁스의 액상 촉매분해반응 Liquid-phase Catalytic Cracking of Polyethylene Wax to Liquid over H-beta Zeolite 심종섭, 김기범, 김종호, 서곤 Shim JS, Kim KB, Kim JH, Seo G |
453 - 459 |
Polytetrafluoroethylene과 Polysulfone막흡수를 이용한 이산화탄소의 분리 Separation of Carbon Dioxide using Polytetrafluoroethylene and Polysulfone Membrane Contactors 이기라, 고준성, 양승만 Yi GR, Ko JS, Yang SM |
460 - 466 |
전해중합법을 이용한 폴리피롤 전극의 제조와 특성에 관한 연구 A Study on the Characteristics of Polypyrrole Electrodes Prepared by Electrochemical Polymerization Method 김광천, 박종호, 임재홍, 한학수, 조영일 Kim KC, Park JH, Im JH, Han HS, Joe YI |
467 - 471 |
CVI에 의한 적층 화이버강화 복합물질 제조에서의 확산의 영향 Effects of Diffusion on the Fabrication of Composites Reinforced with Layered Fibers by CVI 김영준, 이성주, 임병오, 정귀영 Kim YJ, Lee SJ, Rim BO, Chung GY |
472 - 477 |
도매창고에서의 불확실한 수요를 고려한 다지역 회분식 공장의 생산 및 분배 Production and Distribution of Multisite Batch Plants Considering an Uncertain Demand at Warehouses 이호경, 이인범 Lee HK, Lee IB |
478 - 483 |
회분식공정의 지능형 자동설계 Package를 위한 장입, 반응공정의 동적모사기 모듈 및 Interface 개발 Development of Dynamic Simulator Modules of Charge, Reaction Processes and Interface for Intelligent Batch Process Auto-design Package 정재학, Stephanopoulos G Jung JH, Stephanopoulos G |
484 - 490 |
키토산과 가교 키토산을 이용한 경피흡수치료 시스템 개발 Development of Transdermal Therapeutic Systems using Crosslinked Chitosan and Chitosan 나재운 Nah JW |