화학공학소재연구정보센터

Powder Technology

Powder Technology, Vol.229 Entire volume, number list
ISSN: 0032-5910 (Print) 

In this Issue (39 articles)

1 - 6 Rapid synthesis and characterization of CeMCM-41
de Souza LKC, Pardauil JJR, Zamian JR, da Rocha GN, Barrado CM, Angelica RS, da Costa CEF
7 - 16 Preparation of ultrafine spherical AlOOH and Al2O3 powders by aqueous precipitation method with mixed surfactants
Kong J, Chao BX, Wang T, Yan YL
17 - 23 Mechanochemical synthesis of alumina nanoparticles: Formation mechanism and phase transformation
Isfahani TD, Javadpour J, Khavandi A, Dinnebier R, Goodarzi M, Rezaie HR
24 - 29 Electrochemical characteristics of cathode materials NiS2 and Fe-doped NiS2 synthesized by mechanical alloying for lithium-ion batteries
Liu XJ, Xu ZZ, Ahn HJ, Lyu SK, Ahn IS
30 - 36 Synthesis of PbO and PbBr2 nanopowders from nano-sized 2D lead(II) coordination polymers
Musevi SJ, Sahin E, Aslani A
37 - 44 Structural properties and magnetic interactions in Ni0.5Mg0.5Fe2 (-) xCrxO4 (0 <= x <= 1) ferrite nanoparticles
Hashim M, Alimuddin, Kumar S, Shirsath SE, Kotnala RK, Chung H, Kumar R
45 - 50 A novel brush feeder for the pneumatic delivery of dispersed small particles at steady feed rates
Woodruff RB, Kreider P, Weimer AW
51 - 60 TiO2 nanoparticle layer formation on ceramic support, a statistical approach to control influential synthesis parameters
Habibi S, Fatemi S, Izadyar S, Mousavand T
61 - 70 Experimental and numerical analysis of soybean meal drying in fluidized bed
da Silva FRGB, de Souza M, da Costa AMD, Jorge LMD, Paraiso PR
71 - 77 Investigation of artificial neural network methodology for modeling of a liquid-solid circulating fluidized bed riser
Razzak SA, Rahman SM, Hossain MM, Zhu J
78 - 83 Fabrication of CIGS nanoparticle-ink using ball milling technology for applied in CIGS thin films solar cell
Liu CP, Chuang CL
84 - 89 The 3-D shape of blasted and crushed rocks: From 20 mu m to 38 mm
Garboczi EJ, Liu X, Taylor MA
90 - 96 A simple method for determining sphere packed bed radial porosity
Mueller GE
97 - 103 Effect of operating conditions on dry particle coating in a high shear mixer
Sato A, Serris E, Grosseau P, Thomas G, Chamayou A, Galet L, Baron M
104 - 111 Properties of cementitious materials in their dry state and their influences on viscosity of the cementitious pastes
Lomboy GR, Wang KJ, Quanji ZJ
112 - 118 Synthesis and characterization of nano-sized ceria powder via oxalate decomposition route
Gabal MA, Elroby SAK, Obaid AY
119 - 125 Design considerations for hydraulic backfilling with coal combustion products (CCPs) at high solids concentrations
Senapati PK, Mishra BK
126 - 136 Twin screw wet granulation: Effects of properties of granulation liquid
Dhenge RM, Cartwright JJ, Hounslow MJ, Salman AD
137 - 147 Effect of binder to solid ratio on mechanical properties of granules processed using reactive and non-reactive binder
Hibare S, Acharya K
148 - 151 Effect of complexing agents on the powder characteristics and sinterability of neodymium doped yttria nanoparticles
Laishram K, Mann R, Malhan N
152 - 161 Efficient production of Mg2Si in a fluidized-bed reactor
Li J, Luo GH, Wei F
162 - 169 Jet attrition in a fluidized bed. Part I: Effect of nozzle operating conditions
Zhang Q, Jamaleddine TJ, Briens C, Berruti F, McMillan J
170 - 177 Jet attrition in a fluidized bed. Part II: Effect of fluidized bed hydrodynamics
Zhang Q, Jamaleddine TJ, Briens C, Berruti F, McMillan J
178 - 184 An improved estimation of coal particle mass using image analysis
Zhang ZL, Yang JG, Ding LH, Zhao YM
185 - 190 Development and evaluation of polycarboxylic acid hyper-dispersant used to prepare high-concentrated coal-water slurry
Zhou MS, Huang K, Yang DJ, Qiu XQ
191 - 198 Velocities of copper droplets in the De Laval atomization process
Planche MP, Khatim O, Dembinski L, Coddet C, Girardot L, Bailly Y
199 - 205 A laboratory investigation and discrete element modeling of rock flow in a chute
Li H, McDowell GR, Lowndes IS
206 - 213 Preparation and characterization of colored aluminum pigments Al/SiO2/Fe2O3 with double-layer structure
Zhang YC, Ye HQ, Liu H, Han K
214 - 221 Power consumption profile analysis during wet agglomeration process: Energy approach of wheat powder agglomeration
Rondet E, Denavaut M, Mandato S, Duri A, Ruiz T, Cuq B
222 - 228 Explosion characteristics of H-2/CH4/air and CH4/coal dust/air mixtures
Li QZ, Lin BQ, Dai HM, Zhao S
229 - 236 Studies of the effect of synthesis parameters on ZSM-5 nanocrystalline material during template-hydrothermal synthesis in the presence of chelating agent
Karimi R, Bayati B, Aghdam NC, Ejtemaee M, Babaluo AA
237 - 245 Physical and chemical characteristics of activated carbon prepared by pyrolysis of chemically treated date stones and its ability to adsorb organics
Ahmed MJ, Theydan SK
246 - 252 Crystallinity control of flame generated composite nanoparticles by laser irradiation
Sheen S, Yang S, Jun K, Pikhitsa PV, Choi M
253 - 260 Effect of feed frame design and operating parameters on powder attrition, particle breakage, and powder properties
Mendez R, Velazquez C, Muzzio FJ
261 - 269 PTV measurement of drag coefficient of fibrous particles with large aspect ratio
Qi GQ, Nathan GJ, Kelso RM
270 - 275 Structure and magnetic properties of Mn(Zn)Fe2-xRExO4 ferrite nano-powders synthesized by co-precipitation and refluxing method
Meng YY, Liu ZW, Dai HC, Yu HY, Zeng DC, Shukla S, Ramanujan RV
276 - 284 Fabrication of Al/Al2O3 composites by in-situ powder metallurgy (IPM)
Pournaderi S, Mahdavi S, Akhlaghi F
285 - 289 One-step preparation of magnetically responsive materials from non-magnetic powders
Safarik I, Horska K, Pospiskova K, Safarikova M
290 - 293 Sol-gel based Pechini method synthesis and characterization of Sm1-xCaxFeO3 perovskite 0.1 <= x <= 0.5
Huizar-Felix AM, Hernandez T, de la Parra S, Ibarra J, Kharisov B