화학공학소재연구정보센터

Polymer Engineering and Science

Polymer Engineering and Science, Vol.54, No.12 Entire volume, number list
ISSN: 0032-3888 (Print) 

In this Issue (33 articles)

2707 - 2714 On the Encapsulation of Natural Pesticide Using Polyvinyl Alcohol/Alginate-Montmorillonite Nanocomposite for Controlled Release Application
Rashidzadeh A, Olad A, Salari D, Hejazi MJ
2715 - 2730 Decrosslinking of Crosslinked High-Density Polyethylene via Ultrasonically Aided Single-Screw Extrusion
Isayev AI, Huang KY
2731 - 2738 Preparation and Electrochemistry of Nanostructured PPy/Graphite Nanosheets/Rare Earth Ions Composites for Supercapacitor
Sun WH, Mo ZL, Li HL, Sun Y, Zhou YQ
2739 - 2745 Microcellular Injection Molding of In Situ Modified Poly(ethylene terephthalate) With Supercritical Nitrogen
Xi ZH, Zhang FL, Zhong H, Liu T, Zhao L, Turng LS
2746 - 2752 Effects of Mesoporous Silica Particles on the Emulsion Polymerization of Methyl Methacrylate
Zhang FA, Luo M, Chen ZJ, Wei ZB, Pinnavaia TJ
2753 - 2761 Radiation Initiated Synthesis of 2-Acrylamidoglycolic Acid Grafted Carboxymethyl Cellulose as pH-Sensitive Hydrogel
Abd El-Mohdy HL
2762 - 2769 Organoclay-Reinforced Compatible Blends of Polypropylene With an Amorphous Polyamide
Aranburu N, Eguiazabal JI
2770 - 2776 Improving the Properties of Polylactic Acid by Blending With Low Molecular Weight Polylactic Acid-g-Natural Rubber
Thepthawat A, Srikulkit K
2777 - 2784 A Renewable Agricultural Waste Material for the Synthesis of the Novel Thermal Stability Epoxy Resins
Ding N, Wang XF, Tian YM, Yang L, Chen HZ, Wang ZC
2785 - 2790 Crystal Transition Behavior of Odd-Odd Nylon 11,11 Under Annealing and Stretching
Liu SB, Fu P, Liu MY, Li ZP, Lv ZY, Zhao QX
2791 - 2798 Characterization of Acrylonitrile-Butadiene-Styrene (ABS) Copolymer Blends With Foreign Polymers Using Fracture Mechanism Maps
An J, Kim C, Choi BH, Lee JM
2799 - 2805 Synthesis of Polyacrylamide Hydrogels as p-n-Junction With Ionic Charge Carriers
Alveroglu E, Yilmaz Y
2806 - 2814 Intrusive Measurement of Polymer Flow Temperature
Launay J, Allanic N, Mousseau P, Deterre R, Madec Y
2815 - 2823 Development of a Multivariable Online Monitoring System for the Thermoforming Process
Martin PJ, Keaney T, McCool R
2824 - 2838 System Identification and Modeling of Viscoelastic Behavior From Capillary Melt Rheological Data
Kazmer DO
2839 - 2847 Development of a Gel Spinning Process for High-Strength Poly(ethylene oxide) Fibers
Wyatt TP, Chien AT, Kumar S, Yao DG
2848 - 2858 Influence of Crosslinking on Crystallization, Rheological, and Mechanical Behaviors of High Density Polyethylene/Ethylene-Vinyl Acetate Copolymer Blends
Zhang XH, Yang HM, Song YH, Zheng Q
2859 - 2865 Cooperative Rearrangement Region in Nanoclay-Reinforced Unsaturated Polyester Resin
Poorabdollah M, Beheshty MH, Atai M
2866 - 2871 Mechanical Properties of (Surface-Modified Potassium Polytitanate Small Additives)/Epoxy Composite Materials
Burmistrov IN, Shatrova NV, Mostovoy AS, Mazov IN, Kuznetsov DV, Panova LG, Gorokhovsky AV, Yudin AG
2872 - 2876 Thermal Analysis and Non-Isothermal Kinetics of Poly(ethylene glycol) With Different Molecular Weight
Wei T, Zheng BC, Yi HL, Gao YF, Guo WH
2877 - 2886 Increasing Cell Homogeneity of Semicrystalline, Biodegradable Polymer Foams With a Narrow Processing Window via Rapid Quenching
Wright ZC, Frank CW
2887 - 2895 Modification of Coconut Fibers With Polyaniline for Manufacture of Pressure-Sensitive Devices
de Souza FG, Pinto JC, Garcia FA, de Oliveira GE, Tavares MIB, da Silva AM, Pereira ED
2896 - 2901 Alumina Nanoparticle Filled Epoxy Resin: High Strain Rate Compressive Behavior
Naik NK, Pandya KS, Kavala VR, Zhang W, Koratkar NA
2902 - 2910 Facile Preparation and Cytocompatibility of Poly(lactic acid)/Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Hybrid Fibrous Scaffolds
Wang XH, Sang L, Wei ZY, Zhai LJ, Wang H, Song KD, Qi M
2911 - 2917 Study on Thermal Stability and Flame Retardancy of Polymer/Layered Silicate Nanocomposites Based on POE and POE-g-MAH
Qin SH, Li QF, He M, Shao HJ, Yu J, Guo JB, Zhang K, Yan W
2918 - 2924 Flame Retardant Ethylene-Vinyl Acetate Composites Based on Layered Double Hydroxides With Zinc Hydroxystannate
Jia CX, Qian Y, Chen XL, Liu Y
2925 - 2937 Solid-State Polymerization of Poly(ethylene terephthalate): Effect of Organoclay Concentration
Dini M, Carreau PJ, Kamal MR, Ton-That MT, Esmaeili B
2938 - 2946 Surface Modification of a Calcium Fluoride Filler and the Effect on the Nonisothermal Crystallization Behavior of Poly(ethylene terephthalate)
Sanchez-Leija RJ, Riba-Moliner M, Cayuela-Marin D, Dominguez-Espinos O, Sanchez-Loredo MG
2947 - 2957 A Novel Thermoplastic Polyurethane Scaffold Fabrication Method Based on Injection Foaming With Water and Supercritical Carbon Dioxide as Coblowing Agents
Mi HY, Jing X, Salick MR, Peng XF, Turng LS
2958 - 2964 Dynamic Behavior of Short Aramid Fiber-Filled Elastomer Composites
Hintze C, Stocek R, Horst T, Jurk R, Wiessner S, Heinrich G
2965 - 2969 Preparation and Characterization of Porous PDMS Beads for Oil and Organic Solvent Sorption
Li N, Li T, Lei XM, Fu B, Liao WX, Qiu J
2970 - 2978 Electrospun Polyester/Cyclodextrin Nanofibers for Entrapment of Volatile Organic Compounds
Kayaci F, Uyar T
2979 - 2988 Effect of Electron Beam Radiation on Tensile and Viscoelastic Properties of Styrenic Block Copolymers
Wu JP, Soucek MD, Cakmak M