화학공학소재연구정보센터

Polymer Engineering and Science

Polymer Engineering and Science, Vol.39, No.9 Entire volume, number list
ISSN: 0032-3888 (Print) 

In this Issue (25 articles)

1577 - 1583 Molecular structure evolution in peroxide-initiated crosslinking of an ethylene vinyl acetate copolymer and a metallocene polyolefin elastomer
Tai HJ
1584 - 1596 Analysis of mixing during melt-melt blending in twin screw extruders using reactive polymer tracers
Shearer G, Tzoganakis C
1597 - 1603 Performance of polyethylene/ethylene-vinyl alcohol copolymer/polyethylene multilayer films using maleated polyethylene blends
Villalpando-Olmos J, Sanchez-Valdes S, Yanez-Flores IG
1604 - 1613 Measurement of the coefficient of dynamic friction at extrusion processing conditions
Gamache E, Lafleur PG, Peiti C, Vergnes B
1614 - 1618 Effect of IR transparency of the top polymer layer on low thermal IR emittance paint coatings
Ma CCM, Ho WD
1619 - 1627 In-situ monitoring of product shrinkage during injection molding using an optical sensor
Thomas CL, Bur AJ
1628 - 1641 In-situ reactive blending of polyethylene and polypropylene in co-rotating and counter-rotating extruders
Hettema R, Van Tol J, Janssen LPBM
1642 - 1650 Damping enhancement of rubber dampers for high speed compact disk players
Chang SH, Choi JK, Lee DG, Kim HS
1651 - 1660 Viscoelastic properties and transitions during thermal and UV cure of a methacrylate resin
Lange J
1661 - 1666 Structural modifications induced by recycling of polypropylene
Incarnato L, Scarfato P, Gorrasi G, Vittoria V, Acierno D
1667 - 1677 Effects of viscosity ratio and compatibilizers on the morphology and mechanical properties of polycarbonate/acrylonitrile-butadiene-styrene blends
Yang KM, Lee SH, Oh JM
1678 - 1688 Conductive polymer blends filled with carbon black: Positive temperature coefficient behavior
Yu G, Zhang Q, Zeng HM, Hou YH, Zhang HB
1689 - 1695 Thermal diffusivity of polyurethane foams measured by the modified Angstrom method
Prociak A, Sterzynski T, Pielichowski J
1696 - 1709 Model filled rubber. I: Effect of particle morphology on suspension rheology
Cai JFJ, Salovey R
1710 - 1716 Deformation behavior of a polyvinyl chloride (PVC) tube by Mandrel drawing
Ulas I
1717 - 1725 Coarsening in molten quiescent polymer blends: The role of the initial morphology
Willemse RC, Ramaker EJJ, Van Dam J, De Boer AP
1726 - 1735 Morphology and mechanical performance of pregenerated and "in-situ" PP/Vectra B composites
Vallejo FJ, Eguiazabal JI, Nazabal J
1736 - 1751 Effect of polymer properties on the structure of injection-molded parts
Ben Daly H, Sanschagrin B, Nguyen TK, Cole KC
1752 - 1756 DC conductivity and dielectric response in amorphous polycarbonate of bisphenol-A
Santos S, Cedeno A, Gomez C
1757 - 1768 A comparative study of fiber breakage in compounding glass fiber-reinforced thermoplastics in a Buss Kneader, modular co-rotating and counter-rotating twin screw extruders
Shon KJ, White JL
1769 - 1775 A study of rheological behavior of a polypyrrole modified UHMWPE gel using a parallel plate rheometer
Chiu HT, Wang JH
1776 - 1786 An experimental study of foamed polyethylene in rotational molding
Liu SJ, Tsai CH
1787 - 1801 Melt temperature profile prediction for thermoplastic injection molding
Zhao CH, Gao FR
1802 - 1811 Uniform purging of resins in contact bed purge vessels
Pittenger BH, Carson JW, Prescott JK, Purutyan H
1812 - 1822 A comparison between experiments and predictions for the blow molding of an industrial part
Debbaut B, Homerin O, Jivraj N