화학공학소재연구정보센터

Polymer

Polymer, Vol.46, No.23 Entire volume, number list
ISSN: 0032-3861 (Print) 

In this Issue (119 articles)

9523 - 9528 Mechanism of secondary crystallisation in irradiated and aged ultra high molecular weight polyethylene
Barron D, Birkinshaw C
9529 - 9532 Main chain helical transformation induced through UV light in arylidene polymer
Arun A, Reddy BSR
9533 - 9537 Assessing organo-clay dispersion in polymer layered silicate nanocomposites: A SAXS approach
Causin V, Marega C, Marigo A, Ferrara G
9538 - 9543 Electrospinning and structural characterization of ultrafine poly(butylene succinate) fibers
Jeong EH, Im SS, Youk JH
9544 - 9548 Growth of sculptured polymer submicronwire assemblies by vapor deposition
Pursel S, Horn MW, Demirel MC, Lakhtakia A
9549 - 9554 Polymorphism of syndiotactic polystyrene: gamma phase crystallization induced by bulky non-guest solvents
Rizzo P, Albunia AR, Guerra G
9555 - 9561 Independent control of sol molar mass and gel content in acrylate polymer/latexes
Chauvet J, Asua JA, Leiza JR
9562 - 9573 Termination rate coefficients for acrylamide in the aqueous phase at low conversion
Seabrook SA, Pascal P, Tonge MP, Gilbert RG
9574 - 9584 The effects of intragallery polymerization on the structure of PMMA-clay nanocomposites
Stadtmueller LM, Ratinac KR, Ringer SP
9585 - 9595 Thiophene-containing poly(arylene-ethynylene)-alt-poly(arylenevinylene)s: Synthesis, characterisation and optical properties
Egbe DAM, Nguyen L, Carbonnier B, Muhlbacher D, Sariciftci NS
9596 - 9603 Graft polymerization of acrylic acid onto macroporous polyacrylamide gel (cryogel) initiated by potassium diperiodatocuprate
Savina IN, Mattiasson B, Galaev IY
9604 - 9614 Synthesis and characterization of new injectable and degradable dextran-based hydrogels
Maia J, Ferreira L, Carvalho R, Ramos MA, Gil MH
9615 - 9625 Preparation and characterization of alpha-cyclodextrin-containing membranes - application to the selective extraction of xylene isomers
Touil S, Tingry S, Palmeri J, Bouchtalla S, Deratani A
9626 - 9631 Olefin polymerisation with hafnocenes: A bridged alicyclic alcohol as a ligand and as the hafnocene modifier
Grafov AV, Firme CL, Grafova IA, Benetollo F, Dias ML, Abadie MJM
9632 - 9641 Ability of nitrones of various structures to control the radical polymerization of styrene mediated by in situ formed nitroxides
Sciannamea V, Guerrero-Sanchez A, Schubert US, Catala JM, Jerome R, Detrembleur C
9642 - 9652 New self-assembling biocompatible-biodegradable amphiphilic block copolymers
Signori F, Chiellini F, Solaro R
9653 - 9663 Preparation of macrocellular PU-PS interpenetrating networks
Lepine O, Birot M, Deleuze H
9664 - 9673 Fabrication and characterization of microgel-impregnated, thermosensitive PNIPAAm hydrogels
Zhang XZ, Chu CC
9674 - 9685 Novel thermosets prepared by cationic copolymerization of various vegetable oils - synthesis and their structure-property relationships
Andjelkovic DD, Valverde M, Henna P, Li FK, Larock RC
9686 - 9693 Geometrical influence of AB(n) monomer structure on the thermal properties of linear-hyperbranched ether-ketone copolymers prepared via an AB+AB(n) route
Fossum E, Tan LS
9694 - 9701 Polyimide/silica hybrid-clay nanocomposites
Park C, Smith JG, Connell JW, Lowther SE, Working DC, Siochi EJ
9702 - 9713 The effects of clay on the thermal degradation behavior of poly(styrene-co-acrylonitirile)
Jang BN, Wilkie CA
9714 - 9724 Synthesis and properties of novel poly(tetramethylsilnaphthylenesiloxane) derivatives
Otomo Y, Nagase Y, Nemoto N
9725 - 9735 Synthesis and characterization of a series of star-branched poly (epsilon-caprolactone)s with the variation in arm numbers and lengths
Choi J, Kim IK, Kwak SY
9736 - 9741 Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties
Rao TV, Yamashita H, Uchimaru Y, Sugiyama J, Takeuchi K
9742 - 9752 Synthesis, characterization and properties of chitosan modified with poly(ethylene glycol)-polydimethylsiloxane amphiphilic block copolymers
Rutnakornpituk M, Ngamdee P, Phinyocheep P
9753 - 9761 Anionic living polymerization of macromonomers: Preparation of a particle-like purging reagent and characterization of poly(macromonomer)s
Se K, Inoue N, Yamashita M
9762 - 9768 Kinetic study on reversible addition-fragmentation chain transfer (RAFT) process for block and random copolymerizations of styrene and methyl methacrylate
Kubo K, Goto A, Sato K, Kwak Y, Fukuda T
9769 - 9777 First nitroxide-mediated free radical dispersion polymerizations of styrene in supercritical carbon dioxide
Ryan J, Aldabbagh F, Zetterlund PB, Okubo M
9778 - 9783 Synthesis and inclusion property of alpha-cyclodextrin-linked alginate
Pluemsab W, Sakairi N, Furuike T
9784 - 9792 Ring-opening polymerization of lactide initiated by magnesium and zinc alkoxides
Wu JC, Huang BH, Hsueh ML, Lai SL, Lin CC
9793 - 9802 N,N-dicyclohexylcarbodiimide assisted synthesis and characterization of poly(vinyl alcohol-co-vinyl levulinate)
Wang YM, Ikeda A, Hori N, Takemura A, Ono H, Yamada T, Tsukatani T
9803 - 9809 Synthesis and photophysical properties of a charm-bracelet type C-60-grafted PPV derivative
Chen Y, Midorikawa T, Bai JR, Liu Y, Araki Y, Ito O
9810 - 9820 Synthesis and characterization of alternating fluorene-based copolymers containing diaryl- and non-substituted bithiophene units
Lin HC, Sung HH, Tsai CM, Li KC
9821 - 9830 Investigation on thermotropic liquid crystalline and photocrosslinkable polyarylidene arylphosphate esters containing cyclohexanone units
Sakthivel P, Kannan P
9831 - 9839 Non-isothermal crystallization of a vinyl alcohol-ethylene copolymer studied by DSC and real time WAXS/SAXS scattering
Krasteva M, Cerrada ML, Benavente R, Perez E
9840 - 9850 Improving the adhesion of poly(ethylene terephthalate) fibers to poly(hydroxyethyl methacrylate) hydrogels by ozone treatment: Surface characterization and pull-out tests
Ferreira L, Evangelista MB, Martins MCL, Granja PL, Esteves JL, Barbosa MA
9851 - 9862 Introduction of silica into thermo-responsive poly(N-isopropyl acrylamide) hydrogels: A novel approach to improve response rates
Van Durme K, Van Mele B, Loos W, Du Prez FE
9863 - 9870 Preparation and properties of starch thermoplastics modified with waterborne polyurethane from renewable resources
Lu YS, Tighzert L, Dole P, Erre D
9871 - 9880 Properties of poly(butylene terephthatlate) polymerized from cyclic oligomers and its composites
Parton H, Baets J, Lipnik P, Goderis B, Devaux J, Verpoest I
9881 - 9891 Filled poly(2,6-dimethyl-1,4-phenylene oxide) dense membranes by silica and silane modified silica nanoparticles: characterization and application in pervaporation
Khayet M, Villaluenga JPG, Valentin JL, Lopez-Manchado MA, Mengual JI, Seoane B
9892 - 9898 Polydimethylsiloxane latexes and copolymers by polymerization and polyaddition in miniemulsion
Landfester K, Pawelzik U, Antonietti M
9899 - 9907 Association behavior of thermo-responsive block copolymers based on poly(vinyl ethers)
Verdonck B, Gohy JF, Khousakoun E, Jerome R, Du Prez F
9908 - 9918 Pulsed electron beam irradiation of dilute aqueous poly(vinyl methyl ether) solutions
Schmidt T, Janik I, Kadlubowski S, Ulanski P, Rosiak JM, Reichelt R, Arndt KF
9919 - 9927 Evolution of the coefficient of thermal expansion of a thermosetting polymer during cure reaction
Leroy E, Dupuy J, Maazouz A, Seytre G
9928 - 9940 Vibrational and electronic properties of PPV-derived co-polymers: PPV-ether and C1-4PPV-ether
Mabrouk A, Alimi K, Hamidi M, Bouachrine B, Molinie P
9941 - 9954 Influence of shear flow on the preparation of polymer layered silicate nanocomposites
Homminga D, Goderis B, Hoffman S, Reynaers H, Groeninckx G
9955 - 9964 A theoretical investigation on the electronic and optical properties of pi-conjugated copolymers with an efficient electron-accepting unit bithieno[3,2-b : 2' 3'-e]pyridine
Yang L, Feng JK, Liao Y, Ren AM
9965 - 9973 Viscoelastic properties and morphological characterization of silica/polystyrene nanocomposites synthesized by nitroxide-mediated polymerization
Bartholome C, Beyou E, Bourgeat-Lami E, Cassagnau P, Chaumont P, David L, Zydowicz N
9974 - 9986 Determination of permeability and diffusivity of oxygen in polymers by polarographic method with inert gas
Wichterlova J, Wichterle K, Michalek J
9987 - 9993 Synthesis, thermal and mechanical properties and biodegradation of branched polyamide 4
Kawasaki N, Nakayama A, Yamano N, Takeda S, Kawata Y, Yamamoto N, Aiba S
9994 - 10003 Evaluation of CO2 permeation through functional assembled mono-layers: Relationships between structure and transport
Gugliuzza A, Drioli E
10004 - 10010 Dynamic mechanical analysis of the two glass transitions in a thermotropic polymer
Fernandez-Blazquez JP, Bello A, Perez E
10011 - 10016 Temperature induced phase transition of interpenetrating polymer networks composed of poly(vinyl alcohol) and copolymers of N-isopropylacrylamide with acrylamide or 2-acrylamido-2-methylpropyl-sulfonic acid
Szilagyi A, Zrinyi M
10017 - 10026 A new biodegradable blends prepared from polylactide and hyaluronic acid
Wu CS, Liao HT
10027 - 10034 Synthesis and thermo-responsive behavior of fluorescent labeled microgel particles based on poly(N-isopropylacrylamide) and its related polymers
Matsumura Y, Iwai K
10035 - 10044 Effect of helix-coil transition on association behavior of both-ends hydrophobically-modified water-soluble polypeptide
Inomata K, Kasuya M, Sugimoto H, Nakanishi E
10045 - 10055 Controlled one-pot synthesis of pH-sensitive self-assembled diblock copolymers and their aggregation behavior
Mao BW, Gan LH, Gan YY, Tam KC, Tan OK
10056 - 10065 Low-dielectric, nanoporous polyimide films prepared from PEO-POSS nanoparticles
Lee YJ, Huang JM, Kuo SW, Chang FC
10066 - 10076 Microstructure and rheological properties of pH-responsive core-shell particles
Tan BH, Tam KC, Lam YC, Tan CB
10077 - 10084 Phase behavior of poly(N-isopropylacrylamide) in water-methanol cononsolvent mixtures and its relevance to membrane formation
Tao CT, Young TH
10085 - 10091 Fully exfoliated nanocomposite from polypyrrole graft copolymer/clay
Bae WJ, Kim KH, Jo WH, Park YH
10092 - 10101 Thermal/pH-sensitive core-shell copolymer latex and its potential for targeting drug carrier application
Lin CL, Chiu WY, Lee CF
10102 - 10112 Preparation of novel bio-matrix by the complexation of DNA and metal ions
Yamada M, Yokota M, Kaya M, Satoh S, Jonganurakkun B, Nomizu M, Nishi N
10113 - 10118 A block copolymer nanotemplate for mechanically tunable polarized emission from a conjugated polymer
Deng T, Breen C, Breiner T, Swager TM, Thomas EL
10119 - 10127 Preparation, characterization and mechanical properties of epoxidized soybean oil/clay nanocomposites
Liu ZS, Erhan SZ, Xu JY
10128 - 10138 A Monte Carlo simulation study of the mechanical and conformational properties of networks of helical polymers. Part II. The effect of temperature
Batman R, Carri GA
10139 - 10147 Thermal decomposition of alkyl ammonium ions and its effects on surface polarity of organically treated nanoclay
Dharaiya D, Jana SC
10148 - 10157 Crystallization, melting, and morphology of a poly(ethylene oxide) diblock copolymer containing a tablet-like block of poly {2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene}
Huang Y, Wang J, Liu XB, Zhang HL, Chen XF, Zhuang WC, Chen X, Ye C, Wan XH, Chen EQ, Zhou QF
10158 - 10166 Enhancing polyurethane properties via soft segment crystallization
Sonnenschein MF, Lysenko Z, Brune DA, Wendt BL, Schrock AK
10167 - 10172 Characterization of network morphology in anion binding hydrogels used for wastewater remediation
Kioussis DR, Kofinas P
10173 - 10179 Low-temperature reactive coupling at polymer-polymer interfaces facilitated by supercritical CO2
Harton SE, Stevie FA, Spontak RJ, Koga T, Rafailovich MH, Sokolov JC, Ade H
10180 - 10190 A comparative study of the structure-property behavior of highly branched segmented poly(urethane urea) copolymers and their linear analogs
Sheth JP, Unal S, Yilgor E, Yigor I, Beyer FL, Long TE, Wilkes GL
10191 - 10201 Structure-property behavior of segmented polyurethaneurea copolymers based on an ethylene-butylene soft segment
Klinedinst DB, Yilgor E, Yilgor I, Beyer FL, Wilkes GL
10202 - 10213 Mechanical and morphological anisotropy in injection molding of thermotropic liquid crystalline copolyesters
Rendon S, Burghardt WR, Bubeck RA, Thomas LS, Hart B
10214 - 10220 Drifts in penetrant partial molar volumes in glassy polymers due to physical aging
Punsalan D, Koros WJ
10221 - 10225 All-cellulose nanocomposite
Gindl W, Keckes J
10226 - 10236 Real time observation of crystallization in polyethylene oxide with video rate atomic force microscopy
Hobbs JK, Vasilev C, Humphris ADL
10237 - 10245 Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocomposites
Modesti M, Lorenzetti A, Bon D, Besco S
10246 - 10255 Single-monomer acrylate-based resin for three-dimensional photonic crystal fabrication
Wu SH, Straub M, Gu M
10256 - 10268 Viscoelastic study of oil diffusion in molten PP and EPDM copolymer
Ponsard-Fillette M, Barres C, Cassagnau P
10269 - 10278 Nanocomposite matrix for increased fibre composite strength
Vlasveld DPN, Bersee HEN, Picken SJ
10279 - 10289 The relation between rheological and mechanical properties of PA6 nano-and micro-composites
Vlasveld DPN, de Jong M, Bersee HEN, Gotsis AD, Picken SJ
10290 - 10300 Crystallization, structure and properties of plasticized poly(L-lactide)
Kuhnski Z, Piorkowska E
10301 - 10310 Nematic-like mesophase photoconductive polymer for photorefractive applications
Kwon OP, Kwon SJ, Jazbinsek M, Lee SH, Gunter P
10311 - 10320 Dynamic-mechanical behavior of polyethylenes and ethene-/alpha-olefin-co-polymers. Part I. alpha'-relaxation
Stadler FJ, Kaschta J, Munstedt H
10321 - 10330 Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend
Zuiderduin WCJ, Vlasveld DPN, Huetink J, Gaymans RJ
10331 - 10338 Effect of short chain branching upon the crystallization of model polyamides-11
Acierno S, Van Puyvelde P
10339 - 10354 Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part II. Strain recovery
Bartczak Z
10355 - 10363 Orientation of multiwalled carbon nanotubes in composites with polycarbonate by melt spinning
Potschke P, Brunig H, Janke A, Fischer D, Jehnichen D
10364 - 10371 The effect of moisture on the dynamical mechanical properties of bacterial cellulose/glucuronoxylan nanocomposites
Dammstrom S, Salmen L, Gatenholm P
10372 - 10377 Non-equilibrium chemical potential and polymer extraction from a porous matrix
Criado-Sancho M, Jou D, Casas-Vazquez J
10378 - 10382 Morphology of a hydrogen-bonded LC polymer prepared by photopolymerization-induced phase separation under an isotropic phase
Kihara H, Miura T
10383 - 10391 Synthesis, optical and electrochemical properties of luminescent polymers containing 1,2-diphenylmaleimide and thiophene segments
Liu TZ, Chen Y
10392 - 10404 Process and kinetics of order-order transition from bcc-sphere to hex-cylinder in polystyrene-block-polyisoprene-block-polystyrene: Time-resolved SAXS and TEM studies
Sota N, Hashimoto T
10405 - 10418 Rheological and mechanical comparative study of in situ polymerized and melt-blended nylon 6 nanocomposites
Tung J, Gupta RK, Simon GP, Edward GH, Bhattacharya SN
10419 - 10430 Swelling characteristics of NR/PU block copolymers and the effect of NCO/OH ratio on swelling behaviour
Gopakumar S, Nair MRG
10431 - 10436 Structure and Born effective charge determination for planar-zigzag beta-poly(vinylidene fluoride) using density-functional theory
Ramer NJ, Stiso KA
10437 - 10442 Specific interactions in blends containing Chitosan and functionalized polymers. Molecular dynamics simulations
Sandoval C, Castro C, Gargallo L, Radic D, Freire J
10443 - 10449 Fractal aggregate model of sedimenting macromolecules
Gmachowski L
10450 - 10456 The adsorption and partitioning of self-avoiding walk polymer chains into pores from a bulk theta solution
Ziebarth J, Orelli S, Wang YM
10457 - 10465 Effect of concentration reduction due to adsorption on the reduced viscosity of polymer solution in extremely dilute concentration regime
Cai JL, Cheng RS, Bo SQ
10466 - 10477 Anisotropic micro structure-impact fracture behavior relationship of polycarbonate/polyethylene blends injection-molded at different temperatures
Li ZM, Qian ZQ, Yang MB, Yang W, Xie BH, Huang R
10478 - 10483 Synthesis and properties of two novel poly(Schiff base)s and their rare-earth complexes
Yang J, Sun WL, Jiang HJ, Shen ZQ
10484 - 10492 Studies on the properties of a new hybrid materials containing chain-extended urea and SiO2-TiO2 particles
Lu SR, Zhang HL, Zhao CX, Wang XY
10493 - 10505 New insights on the solution behavior and self-assembly of polystyrene/poly(2-vinylpyridine)'hairy' heteroarm star copolymers with highly asymmetric arms in polar organic and aqueous media
Stepanek M, Matejicek P, Humpolickova J, Havrankova J, Podhajecka K, Spirkova M, Tuzar Z, Tsitsilianis C, Prochazka K
10506 - 10516 Epoxy-silica particulate nanocomposites: Chemical interactions, reinforcement and fracture toughness
Ragosta G, Abbate M, Musto P, Scarinzi G, Mascia L
10517 - 10522 Complexing behaviors between ammonium polyacrylate and poly(diallyldimethylammonium chloride) polyelectrolytes
Zhang YH, Binner J
10523 - 10530 Novel biodegradable poly(ethylene glycol)-block-poly(2-methyl-2carboxyl-propylene carbonate) copolymers: Synthesis, characterization, and micellization
Xie ZG, Guan HL, Chen L, Tian HY, Chen XS, Jing XB
10531 - 10537 Thermally cured low surface-tension epoxy films
van de Grampel RD, Ming W, van Gennip WJH, van der Velden F, Laven J, Niemantsverdriet JW, van der Linde R
10538 - 10543 Novel core-shell particles with poly(n-butyl acrylate) cores and chitosan shells as an antibacterial coating for textiles
Ye WJ, Leung MF, Xin J, Kwong TL, Lee DKL, Li P
10544 - 10552 Copoly(aryl ether)s with electron-transporting 2,7-bis(3-(trifluoromethyl) phenyl)-9,9-dihexylfluorene segments: Synthesis, optical, and electrochemical properties
Chen SH, Chen Y
10553 - 10560 Decomposition of 2,5-dimethyl-2,5-di(2-ethylhexanoylperoxy)hexane and its use in polymerization of styrene and methyl methacrylate
Sheng WC, Shan GR, Huang ZM, Weng ZX, Pan ZR
10561 - 10567 Synthesis and characterization of biodegradable poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers
Zhao Q, Cheng GX, Li HM, Ma XL, Zhang LG
10568 - 10573 Effect of elastomeric nanoparticles on properties of phenolic resin
Ma HY, Wei GS, Liu YQ, Zhang XH, Gao JM, Huang F, Tan BH, Song ZH, Qiao JL
10574 - 10584 Poly(hydroxyether terephthalate ester): Synthesis, characterization and competitive specific interactions in mixtures with poly(ethylene oxide)
Liu BQ, Zhang W, Zheng SX
10585 - 10591 Syntheses of diblock copolymers polyolefin-b-poly(epsilon-caprolactone) and their applications as the polymeric compatilizer
Lu YY, Hu YL, Chung TCM
10592 - 10600 Synthesis and optical properties of azobenzene-containing poly(1-alkyne)s with different spacer lengths and ring substituents
Yin SC, Xu HY, Su XY, Gao YC, Song YL, Lam JWY, Tang BZ, Shi WF
10601 - 10606 Controlled synthesis of poly(epsilon-caprolactone)-graft-polystyrene by atom transfer radical polymerization with poly(epsilon-caprolactone-co-alpha-bromo-epsilon-caprolactone) copolymer as macroinitiator
Wang GJ, Shi Y, Fu ZF, Yang WT, Huang QG, Zhang YD