화학공학소재연구정보센터

Journal of the Electrochemical Society

Journal of the Electrochemical Society, Vol.151, No.12 Entire volume, number list
ISSN: 0013-4651 (Print) 

In this Issue (89 articles)

J91 - J94 Effect of magnesium substitution in lithium nickel oxide - An ab initio study
Chang CC, Velikokhatnyi OI, Kumta PN
J95 - J99 Pt-YSZ cathode for electrochemical cells with multilayer functional electrode
Bredikhin S, Abrosimova G, Aronin A, Hamamoto K, Fujishiro Y, Katayama S, Awano M
B621 - B626 Scanning kelvin probe force microscopy - A useful tool for studying atmospheric corrosion of MgAl alloys in situ
Blucher DB, Svensson JE, Johansson LG, Rohwerder M, Stratmann M
B627 - B635 A study of the wetting of metal surfaces in order to understand the processes controlling atmospheric corrosion
Cole IS, Ganther WD, Sinclair JD, Lau D, Paterson DA
B636 - B643 Corrosion of narrow copper damascene interconnects
Ernur D, Terzieva V, Wu W, Brongersma SH, Maex K
B644 - B651 Conjugated polymers for corrosion control: Scanning vibrating electrode studies of polypyrrole-aluminum alloy interactions
He J, Tallman DE, Bierwagen GP
B652 - B660 EQCM study of anodic film growth on valve metals
Olsson COA, Verge MG, Landolt D
B661 - B668 Kinetics and mechanisms of tantalum corrosion in glass melts
Podor R, Rapin C, David N, Mathieu S
B669 - B678 Oxidation behavior of ferritic stainless steels under SOFC interconnect exposure conditions
Yang ZG, Walker MS, Singh P, Stevenson JW, Norby T
B679 - B682 Critical concentrations for selected oxygen reduction reaction inhibitors
Kendig M, Yan C
C753 - C756 PEALD of a ruthenium adhesion layer for copper interconnects
Kwon OK, Kwon SH, Park HS, Kang SW
C757 - C764 An experimentally assisted computational analysis of tin oxide deposition in a cold-wall APCVD reactor
Xenidou TC, Boudouvis AG, Tsamakis DM, Markatos NC
C765 - C771 Mechanically induced superfilling of low-aspect-ratio cavities in an electrochemical mechanical deposition process
Basol BM
C772 - C780 Etching characteristics of HBr-based chemistry on InP using the ICP technique
Vicknesh S, Ramam A
C781 - C785 Bottom-up fill for submicrometer copper via holes of ULSIs by electroless plating
Wang ZL, Yaegashi O, Sakaue H, Takahagi T, Shingubara S
C786 - C788 Relative contributions of N-i2+ and Zn2+ reduction currents to anomalous electrodeposition of Zn-Ni alloys
Chang BY, Park SM
C789 - C792 Growth and characterization of an In-based buffer layer by CBD for Cu(In, Ga)Se-2 solar cells
Larina L, Kim KH, Yoon KH, Konagai M, Ahn BT
C793 - C797 Adsorption of PEG on Au(111) single-crystal electrodes and its influence on copper deposition
Petri M, Kolb DM, Memmert U, Meyer H
C798 - C805 Design of acidic Ni-Mo alloy plating baths using a set of apparent equilibrium constants
Murase K, Ogawa M, Hirato T, Awakura Y
C806 - C810 Thermal decomposition mechanism of a titanium source, Ti-(MPD)-(METHD)(2), in MOCVD
Nakamura T, Nishimura T, Tachibana K
C811 - C815 Galvanostatic deposition of palladium-gold alloys in a lewis basic EMI-Cl-BF4 ionic liquid
Su FY, Huang JF, Sun IW
C816 - C830 Kinetic study of wet chemical treatments on the surface roughness of epoxy polymer layers for buildup layers - I. Sweller influence
Siau S, Vervaet A, Nalines S, Schacht E, Van Calster A
C831 - C849 Kinetic study of wet chemical treatments on the surface roughness of epoxy polymer layers for buildup layers - II. Oxidative treatment of the surface
Siau S, Vervaet A, Nalines S, Schacht E, Van Calster A
C850 - C854 Effects of o-vanillin as a brightener on zinc electrodeposition at iron electrodes
Kim SJ, Kim HT, Park SM
D113 - D120 Chemical and electrochemical synthesis of polyaniline/gold composites
Kinyanjui JM, Hanks J, Hatchett DW, Smith A, Josowicz M
D121 - D126 Interfacial properties and gas bubble formation during the electrolytic preparation of fluorine
Lantelme F, Groult H
D127 - D133 Characterization of electrolytic TiO2 coating on Ti for biomedical applications
Lin CM, Yen SK
E349 - E351 Lattice deformation in thermally degraded barium magnesium aluminate phosphor
Yamada H, Shi WS, Xu CN
E352 - E357 SFG study of thiocyanate ion adsorption onto polycrystalline Au electrode and electrodeposited metallic thin films
Rambaud C, Cagnon L, Levy JP, Tourillon G
E358 - E363 Electroreduction of peroxyacetic acid at gold electrode in aqueous media
Awad MI, Denggerile A, Ohsaka T
E364 - E369 Electrochemical pumping of DMF electrolyte solutions across membranes
Norman M, Noble RD, Koval CA
F283 - F287 Evaluation of thermal stability for CMOS gate metal materials
Cabral C, Lavoie C, Ozcan AS, Amos RS, Narayanan V, Gusev EP, Jordan-Sweet JL, Harper JME
F288 - F291 Negative bias temperature instabilities in SiO2/HfO2-based hole channel FETs
Houssa M, De Gendt S, Groeseneken G, Heyns MM
G801 - G804 n-type doping characteristics of O-implanted AlGaN
Nakano Y, Fujishima O, Kachi T, Abe K, Eryu O, Nakashima K, Jimbo T
G805 - G808 Quasi-superlattice storage - A concept of multilevel charge storage
Chang TC, Yan ST, Liu PT, Chen CW, Wu HH, Sze SM
G809 - G813 Analysis of frictional heating of grooved and flat CMP polishing pads
Borucki L, Charns L, Philipossian A
G814 - G818 Water motion in carrierless wet station
Habuka H, Kobayashi S, Kato M, Takeuchi T, Aihara M
G819 - G823 Wafer-bending measurements in CMP
Ng SH, Yoon I, Higgs CF, Danyluk S
G824 - G828 Postoxidation annealing treatments to improve Si/ultrathin SiO2 characteristics formed by nitric acid oxidation
Asuha, Liu YL, Maida O, Takahashi M, Kobayashi H
G829 - G832 Electrical properties of fluorine-doped oxynitride films prepared by photoillumination liquid-phase deposition
Lee MK, Shih CM, Lin SY, Yang CD, Shih TH
G833 - G838 Structure, chemistry, and electrical performance of silicon oxide-nitride-oxide stacks on silicon
Levin I, Kovler M, Roizin Y, Vofsi M, Leapman RD, Goodman G, Kawada N, Funahashi M
G839 - G846 A shallow and deep trench isolation process module for RF BiCMOS
Forsberg M, Johansson T, Liu W, Vellaikal M
G847 - G852 Second-order normal force brought about by polishing with a polyurethane pad
Ronay M
G853 - G857 Oxide-thickness-dependent suboxide width and its effect on inversion tunneling current
Lin YP, Hwu JG
G858 - G862 Self-conditioning fixed abrasive pad in CMP
Kim H, Park B, Lee S, Jeong H, Dornfeld DA
G863 - G865 Photo-CVD SiO2 layers on AlGaN/GaN/AlGaN MOS-HFETs
Chiou YZ
G866 - G869 The origin of photoluminescence from oxygen precipitates nucleated at low temperature in semiconductor silicon
Leoni E, Martinelli L, Binetti S, Borionetti G, Pizzini S
G870 - G877 Characterization of thermal and electrical stability of MOCVD HfO2-HfSiO4 dielectric layers with polysilicon electrodes for advanced CMOS technologies
Rittersma ZM, Loo JJGP, Ponomarev YV, Verheijen MA, Kaiser M, Roozeboom F, Van Elshocht S, Caymax M
G878 - G881 Electrochemical investigations during the abrasion of aluminum/titanium thin-film stacks in iodate-based slurry
Fang Y, Raghavan S
G882 - G889 Effects of CMP process conditions on defect generation in low-k materials - An atomic force microscopy study
Chandrasekaran N, Ramarajan S, Lee W, Sabde GM, Meikle S
G890 - G894 Initial growth characterization of Au thin films on SnOx substrate by in situ conductivity measurement
Lee DY, Song SK, Koh SK, Baik HK, Song KM
G895 - G899 Drive current enhancement in sub-50 nm CMOS by reduction of SDE resistance with laser thermal process
Yamamoto T, Goto K, Kubo T, Wang Y, Lin T, Talwar S, Kase M, Sugii T
G900 - G903 Novel low-temperature polycrystalline-silicon power devices with very-low on-resistance using excimer laser-crystallization
Cheng HC, Chang FL, Lin MJ, Tsai CC, Liaw CW
G904 - G909 Evolution of surface topography of as-grown Si films near amorphous-to-polycrystalline transition
Edrei R, Shima R, Gridin VV, Roizin Y, Kaplan WD, Hoffman A
G910 - G914 Surface roughness control of 3C-SiC films during the epitaxial growth process
Fu XA, Zorman CA, Mehregany M
G915 - G918 Dramatic improvements in AlGaN/GaN HEMT device isolation characteristics after UV-ozone pretreatment
Moser N, Fitch RC, Crespo A, Gillespie JK, Jessen GH, Via GD, Luo B, Ren F, Gila BP, Abernathy CR, Pearton SJ
H243 - H248 Genetic algorithm-assisted combinatorial search for new red phosphors of high efficiency at soft ultraviolet excitation
Sohn KS, Kim BI, Shin N
H249 - H253 Synthesis, structure, and optical properties of SiO2-Gd2O3 : Eu3+ nanocomposite thin films
Koji S, Fujihara S
H254 - H260 Spectroscopy and lanthanide impurity level locations in CaGa2S4 : Ln(3+) (Ln = Ce, Pr, Tb, Er, Tm)
Bessiere A, Dorenbos P, van Eijk CWE, Yamagishi E, Hidaka C, Takizawa T
H261 - H266 Numerical Simulations of mass-transfer processes in 3D model of electrochemical sensor
Barak-Shinar D, Rosenfeld M, Abboud S
A1989 - A1998 Platinum-iron phosphate electrocatalysts for oxygen reduction in PEMFCs
Bouwman PJ, Dmowski W, Stanley J, Cotten GB, Swider-Lyons KE
A1999 - A2006 Modeling liquid water effects in the gas diffusion and catalyst layers of the cathode of a PEM fuel cell
Lin GY, He WS, Van Nguyen T
A2007 - A2015 How conductivities and viscosities of PC-DEC and PC-EC solutions of LiBF4, LiPF6, LiBOB, Et4NBF4, and Et4NPF6 differ and why
Ding MS, Jow TR
A2016 - A2027 Ab initio calculations of intermediates of oxygen reduction on low-index platinum surfaces
Panchenko A, Koper MTM, Shubina TE, Mitchell SJ, Roduner E
A2028 - A2041 Modeling planar and self-breathing fuel cells for use in electronic devices
Ziegler C, Schmitz A, Tranitz M, Fontes E, Schumacher JO
A2042 - A2046 In situ Raman spectroelectrochemistry of oxygen species on gold electrodes in high temperature molten carbonate melts
Itoh T, Abe K, Dokko K, Mohamedi M, Uchida I, Kasuya A
A2047 - A2052 Electrocatalytic reduction of oxygen in a novel catalytic system with cobalt phthalocyanines and manganese oxide
Arihara K, Mao LQ, Liddell PA, Marino-Ochoa E, Moore AL, Imase T, Zhang D, Sotomura T, Ohsaka T
A2053 - A2059 Ruthenium crossover in direct methanol fuel cell with Pt-Ru black anode
Piela P, Eickes C, Brosha E, Garzon F, Zelenay P
A2060 - A2066 Effects of electrochemical activation and multiwall carbon nanotubes on the capacitive characteristics of thick MnO2 deposits
Wu YT, Hu CC
A2067 - A2073 Capacity fading mechanisms on cycling a high-capacity secondary sulfur cathode
Cheon SE, Choi SS, Han JS, Choi YS, Jung BH, Lim HS
A2074 - A2081 Electrochemical reactivity of Cu3P with lithium
Bichat MP, Politova T, Pascal JL, Favier F, Monconduit L
A2082 - A2087 Comparison of the reactions between Li7/3Ti5/3O4 or LiC6 and nonaqueous solvents or electrolytes using accelerating rate calorimetry
Jiang JW, Chen J, Dahn JR
A2088 - A2094 Operating conditions of a single-chamber SOFC
Napporn TW, Jacques-Bedard X, Morin F, Meunier M
A2095 - A2099 Preparation of P2O5-SiO2 glasses with proton conductivity of similar to 100 mS/cm at room temperature
Nogami M, Tarutani Y, Daiko Y, Izuhara S, Nakao T, Kasuga T
A2100 - A2105 Effect of reformate components on PEMFC performance - Dilution and reverse water gas shift reaction
Gu T, Lee WK, Van Zee JW, Murthy M
A2106 - A2112 Graphite/electrolyte interface formed in LiBOB-based electrolytes - II. Potential dependence of surface chemistry on graphitic anodes
Xu K, Lee U, Zhang SS, Jow TR
A2113 - A2119 Modification of petroleum coke for lithium-ion batteries by heat-treatment with iron oxide
Alcantara R, Lavela P, Ortiz GF, Tirado JL, Stoyanova R, Zhecheva E, Mateos JMJN
A2120 - A2125 Hydrous Ta2O5 center dot nH(2)O modified membrane-electrode assemblies for PEMFCs
Yang B, Manthiram A
A2126 - A2131 Calcium zincate synthesized by ballmilling as a negative material for secondary alkaline batteries
Yang HB, Zhang HC, Wang XD, Wang JH, Meng XL, Zhou ZX
A2132 - A2137 Highly active nonplatinum catalyst for air cathodes
Sawai K, Suzuki N
A2138 - A2142 A safe, low-cost, and sustainable lithium-ion polymer battery
Reale P, Panero S, Scrosati B, Garche J, Wohlfahrt-Mehrens M, Wachtler M
A2143 - A2149 Pt-Co/C electrocatalysts for oxygen reduction in H-2/O-2 PEMFCs synthesized by borohydride method
Salgado JRC, Antolini E, Gonzalez ER
A2150 - A2156 Direct methanol fuel cell performance of disulfonated poly-arylene ether benzonitrile) copolymers
Kim YS, Sumner MJ, Harrison WL, Riffle JS, McGrath JE, Pivovar BS
A2157 - A2172 Reduced two-phase model for analysis of the anode of a DMFC
Birgersson E, Nordlund J, Vynnycky M, Picard C, Lindbergh R
A2173 - A2179 Development of reliable lithium microreference electrodes for long-term in situ studies of lithium-based battery systems
Zhou J, Notten PHL
A2180 - A2182 Development of a lithium-type advanced energy storage device
Yoshino A, Tsubata T, Shimoyamada M, Satake H, Okano Y, Mori S, Yata S
A2183 - A2188 Methanol resistant cathodic catalyst for direct methanol fuel cells
Wang X, Waje M, Yan YS
A2189 - A2192 Increment of Li storage capacity in B2O3-modified hard carbon as anode material for Li-ion batteries
Wu XD, Wang ZX, Chen LQ, Huang XJ
A2193 - A2197 Impedance measurement of each cell of a 10 WPEMFC stack under load
Diard JP, Glandut N, Le Gorrec B, Montella C